CHEMICAL SPRAY OF MANAGING MOSS AND PLANT GROWTH ON ROOF AND REPAIR TO MISC ITEMS IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (CHEMICAL SPRAY OF MANAGING MOSS AND PLANT GROWTH ON ROOF AND REPAIR TO MISC ITEMS IN TECH AREA AT AF STN SURATGARH.)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface 300mm x 450mm x 7mm thick including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 200mm X 300mm X 7mm thick as in vertical surfaces including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for white ceramic non-skid tiles area of tiles exceeding 0.06sqm but not exceeding 0.11sqm and 7mm-8mm thick laid in floors, set and jointed in neat cement to match the shade over and including 15mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for white ceramic non-skid tiles area of tiles exceeding 0.11sqm but not exceeding 0.18sqm and 7mm-8 mm thick laid in floors, set and jointed in neat cement to match the shade over and including 15mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick( square/rectangular) Polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 15mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20mm-25mm thick over and including 20mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes, cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.

M&L for kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement plaster in CM 1:4, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.

M&L for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc and including 20mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

All as per ser item No 9 here-in-before but on dado/skirting and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in platforms/stair case/ countertop including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing including 20mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) exc 1.5sqm but not exc 4sqm each, complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) not exc 1.5sqm each, complete all as specified and directed.

Taking down shutters of any description but exc 1sqm and not exc 2sqm each and refixing in same opening complete all as specified and directed.

Taking down chowkhats or frames exc 1.5sqm but not exc 4sqm each, complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebated including necessary fixing lugs, hinges strike plate etc. complete as specified size of frame105mmx60mm complete all as specified and directed by Engr-in-Charge.

S&F for pressed steel frames for doors with one or more rebated including necessary fixing lugs, hinges strike plate etc. complete as specified size of frame 125mmX60mm complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary formwork complete all as specified and directed.

S&F for framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood plain framed Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S&F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F for 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F for 150mm length of aluminium floor door stopper overall alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exc 200Cu.cm each in 2nd class hard wood complete all as specified and directed.

S&F for mild steel butt hinges of size 100mm, medium weight, cold rolled complete all as specified and directed.

S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

S&F for mild steel barrel tower bolt 200mm long, stove enamelled black with bright bolts, complete all as specified and directed.

S&F for mild steel pressed handles 150mm long, oval type, stove enamelled black, complete all as specified and directed.

M&L for preparation of new wood surfaces and applying two coats of synthetic enamel painting to wood based surfaces of any description, not otherwise described over 10cm width or girth over one coat of pink primer complete all as specified and directed.

S&F for steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges with steel peg stay, complete without glazing bars, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enemel painting to iron and steel surfaces of any description over a coat of red oxide not otherwise described over 10cm width or girth, complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed.

Providing and fixing anodised aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed.

M&L for 12mm thick both sides prelaminated particle board, medium density, fixed with screws to frame work in cup board shutters, partitions, shelves complete all as specified and directed.

S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5sqm in each pane in any position complete all as specified and directed.

S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851mm to 1000mm in width and of weight 61Kg to 80Kg each cast iron body complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specification and directed.

S&F for aluminum anodised ‘D’ type handles 125mm long, complete all as specified and directed .

S&F for 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100mm long butt hinges type B12, cast brass with mild steel hinge pin, bright polished, complete all as specified and directed.

Demolition of brick work or stone/boulders masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement morter 1:6 complete all as specified and directed.

All as per ser item No 44 here-in-before but except brick complete all as specified and directed.

M&L for bricks work with sub class 'B' bricks brick old size straight or cuvred on plan to any radius in half brick thick wall built in cement morter 1:4 complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling/facia/RCC chhaja etc & finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces to receive top layer complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation over new plastered surfaces and applying two coats of exterior acrylic emulsion paint (weather proof treatment), in camouflaging patterns, complete all as specified and directed.

M&L for 1mm-1.5mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.

M&L for painting of treated surfaces to receive two coat of distemper oil emulsion on surfaces of walls and ceiling complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished surfaces fair and even to receive tile complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40 mm grade stone aggregate) as in plinth protection / paving finished fair and even without using extra cement complete all as specified and directed.

Dismantling existing water storage tanks exc 250 litres but not exc 500 litres and removal from site complete all as specified and directed.

Dismantling existing water storage tanks exc 500 litres but not exc 1000 litres and removal from site complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs complete all as specified and directed.

S&F for 1000 litres capacity rotational moulded polyethylene white water storage tanks (Cylindrical vertical with thread cover closed top) double layered, hoisted & fixed in position including GI tank nipple and with union (two No each) fittings and making necessary connections to make the tank functional complete all as specified and directed.

S&F in repair 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and directed.

S&F in repair 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair Ball valve of 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms), complete all as specified and directed.

Dismantling structural steel work including doors, gates and plate but excluding framed truss etc complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed.

S&F for mild steel work in tubular trusses including special shaped washers etc, complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint, complete all as specified and directed.

S&F for rolled mild steel plates (plain or chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W, complete all as specified and directed.

S&F for mild steel for framed structure like trussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flat sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts, complete all as specified and directed.

M&L for pre-painted galvanlume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed.

S&F for mild steel screws bolt (Machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shrunk 11mm-15mm and length of bolt exc 5cm and not exc 10cm, complete all as specified and directed.

S&F for mild steel flat iron as wind tie for roof including necessary drilling for securing bolts etc, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed, complete all as specified and directed.

M&L for coloured designer Chequered cement concrete tiles 300mm X 300mm X 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation ®, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation , filling and mass concrete complete all as specified and directed.

Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed.

Designer type gypsum ceiling board / mineral fibre board of size 595mm x 595mm x 7mm-8mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600mm, GI T-section of size 25mm x 25mm x 1.25mm, GI L-section 25mm x 25mm x 1.25mm, hanging arrangements with roof with GI wire not less than 4mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.

S&F for 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site , complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion paint (weather proof treatment), in camouflaging patterns , complete all as specified and directed.

M&L for preparation of old surfaces and applying two coats of exterior acrylic emulsion paint (weather proof treatment), in camouflaging patterns , like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.

M&L for preparation of newely plastered surfaces and applying three coats of white washing on ceiling complete all as specified and directed.

M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed.

M&L for painting of treated surfaces to receive two coat of dry distemper on surfaces of walls and ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls/kerb stone etc and applying one coat of synthetic enamel paint on plastered surfaces complete all as specified and directed.

M&L for preparation of steel surfaces and applying one coat of synthetic enamel paint, surfaces exc 10cm width or girth of approved tint complete all as specified and directed.

All as per ser item No 88 here-in-before but on wooden surfaces.

S&F for white viterous china battery based infrared sensor operated urinal of approx size 480mm x 300mm x 740mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or Equivalent of GROHE.

S&F for sensor based hand dryer having stainless steel finish fixed in position complete all as specified & directed. Make :- Jaquar Cat No HDR-SAP-M99ACS or Equivalent of GROHE.

S&F for wall hung WC of size 360mm X 540mm X 405mm with soft close seat cover complete all as specified and directed. Make : Jaquar Cat No.: FNS-WHT-40951 & FLV-1073C or Equivalent of GROHE.

S&F for viterous china Counter top wash hand basin of size 700mm X 435mm X 135mm complete all as specified and directed. Make : Jaquar Cat No.: ARS-WH-39903 or Equivalent of GROHE.

S&F for CP brass 32mm dia waste coupling of 130mm height for WHB complete all as specified and directed. Make : Jaquar Cat No:-ALD-WHM-709 or Equivalent of GROHE.

S&F for CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & wall flanges complete all as specified and directed. Make : Jaquar Cat No:-ALD-CHR-769L 300x190 or Equivalent of GROHE.

S&F for 600mm long braided hose with two 15mm nuts & O-ring rubber washer complete all as specified and directed. Make : Jaquar Cat No:-ALD-CHR-801B or Equivalent of GROHE.

S&F for CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified and directed. Make : Jaquar Cat No.: ALD-CHR-565 or Equivalent of GROHE.

S&F for 15mm bore CP brass Bib Cock auto closing system with built in control cock with wall flange complete all as specified and directed. Make : Jaquar Cat No:-CON-047 or Equivalent of GROHE.

S&F for stainless steel toilet paper holder with flap recessed type complete all as specified and directed. Make : Jaquar Cat No:-CAN-1153S or Equivalent of GROHE.

S&F for slim concealed cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified and directed. Make :- Jaquar Cat No: JCS-WHT-2431FS or Equivalent of GROHE.

S&F for control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified and directed. Make :- Jaquar Cat No.: JCP-CHR-102425 or Equivalent of GROHE.

S&F for soap dispenser with glass bottle complete all as specified and directed. Make : Jaquar Cat No.: SDR-WHT-DJ0010F or Equivalent of GROHE.

S&F for soap dish complete all as specified and directed. Make : Jaquar Cat No.: CAN-BCH-1131N or Equivalent of GROHE.

S&F for single towel RING complete all as specified and directed. Make : Jaquar Cat No.: CAN-CHR-1121N or Equivalent of GROHE.

S&F for 15mm bore sensotronic senser faucet for wash basin with 175mm extension body complete all as specified and directed. Make : Jaquar Cat No.:SNR-CHR-51021A or Equivalent of GROHE.

S&F for 15mm bore CP brass angular stop cock with wall flange complete all as specified and directed. Make : Jaquar Cat No.: CON053KN or Equivalent of GROHE.

S&F for aquamax exposed Part Kit of Single Lever Shower Mixer with 3-way diverter (Suitable for ALD-783) complete all as specified & directed. Make : Jaquar Cat No.: 35783KPM & OHS-CHR-1999 or Equivalent of GROHE.

M&L for Providing and injecting chemical emulsion for glyphosate-based herbicides above external roof surface, roof kerbs , roof parapets , khuras and like using chemical emulsion at the rate of .5 litres per 10sqm of the vertical/horizontal surface including making good surface using cement mortar 1:2 (1 cement :2 coarse sand) to match the existing surface/sub surface complete all as specified and directed.

Scrub/bush including grasses, herbs and geophytes to grubbing up including cutting of trunk portion protruding over roof, digging out roots, filling holes with cement mortar 1:2 and levelling off surface , stacking of serviceable material and removing of unserviceable material to a distance not exc. 1km and clearing sit complete all as specified and directed.

M&L for flush pointing to brick on roof to bricks laid flat or brick tiles in CM 1:3 complete all as specified and directed.

M&L for preparation of old surface of roof and applying two coats of aluminium based paint complete all as specified and directed.

Dismantling bricks (laid flat or on edge) or brick tiles laid, bedded and pointed in any mortar in floors, channels, kerbs, aprons, etc, complete all as specified and directed.

M&L for 40mm thick brick tiles are bedded in 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with liquid WPC in lit on APP membrane bedded in cement mortar (1:6) complete all as specifed and directed.

M&L for reusing the old serviceable 40mm thick tiles bedded in 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with liquid WPC in lit on APP membrane bedded in cement mortar (1:6) complete all as specifed and directed.

Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specifed and directed.

M&L for providing reinforcement cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs/ beams/column in floors balconies,canopies, desc slabs and the shelves and the like, complete all as specifed and directed.

M&L for RCC chajjas 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in approved design complete all as specifed and directed.

Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete, complete all as specifed and directed.

Use and waste of formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete complete all as specifed and directed.

Use and waste of formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but not exc 10cm wide rough finish surface of concrete, complete all as specifed and directed.

Use and waste of formwork to edge of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and side of RCC/PCC bands in walls and similar works not exc 20cm thick, complete all as specifed and directed.

S&F for mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including cranking bending and binding with mild steel (annealed) wire not less than 0.90mm dia, complete all as specifed and directed.

S&F for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape requred, including cranking bending and binding with mild steel (annealed) wire not less than 0.90mm dia, complete all as specifed and directed.

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in top surface of Hardstanding /Path etc, finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifed and directed.

M&L for preparation of newly plastered surface of wall and appying two coats of oil emulsion distemper over and including one coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/S Shree Ram Enterprises