Construction of Underground 33 KV Link Line for feeding from 132 KV Substation Sardhana to 33/11 KV Sardhana Town

Safe carriage of Following Item from any store Centre (Under Jurisdiction fo PVVNL) to Site Store with loading & unloading at both ends respectively 33 KV 3×300 mm2 XLPE Cable

33 KV Line Isolator 800A,

STP 11 Mtr.

Heavy Stock Material other Than pole, 11 KV Switch Gear, 33 KV VCB, 11 KV Cable etc.

Painting of Structures:- Painting of the following structure with one coat of ready mixed primer and two coats of ISI Mark Aluminum paint after rubbing with sand paper to the surface of the structure including labor and T&P complete in all respect. Line Isolator structures, ST pole etc.

Fabrication and erection of cable support made of two pieces of M.S. Channel (100×50×6) mm, 3.75 meter long, joined to each other by means of 5 Nos. M.S. Flat (50×6)mm pieces of size 600 mm long each by welding at equal intervals and grouting in a block of size (300×300×700)mm in CC 1:3:6 complete with one coat of ready mixed primer and two coats of Al. paint. Work includes providing MS flat 50x6mm & three Nos. M.S. clamps, made of (50×6)mm M.S. Flat for holding the cable including nuts and bolts.

H.T. Power Cable Laying : Laying 33 KV, (3×300) mm2 XLPE, Cable (Double circuit) in the cable trench 1.05 m wide, 0.90m depth. Providing 150 mm local sand for cushion beneath and 150 mm above the cable (quantity of local sand required 0.375 cubm/m in length). Making of Chulla for safely laying of cable at incoming switchgear end. The cable shall be duly protected by brick. On both side of cable by laying brick vertically and bricks would also be laid horizontally on top of vertically laid bricks along the cable (minimum 25 Nos. of bricks are to be laid top and outer side along the cable. The work includes digging of trenches, laying of cable in underground trenches, joining of terminal's, back filling of earth and testing and commissioning of power cable etc. Spare cable shall be left over and laid in the trenches in shape of 6m ring at both ends.

Laying and dressing of 33 KV 3×300 mm2 power cable in air.

Preparation of 33 KV Power Cable ends : Making of 33 KV XLPE Heat shrinkable out door jointing kits 300sqmm after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs.

33 KV Bus Bar Jumpering : Jumpering, including clamping/binding with ACSR Dog conductor: (i) 33 KV Fuse Set to 33/11 KV Power Transformer.

Wearing of 160 mm dia . long G.I. pipe in the feeder cable of size of (3×300)mm2 XLPE power cable before making the outdoor cable boxes. The work includes the sealing of G.I. Pipe, top end and lower end of the pipe is to be buried in to the ground about ½ m and proper dressing of cable etc. The work includes lifting, mounting and clamping of 33 KV feeder cable boxes on the feeder with double pole structure and making connections including supply of cable mounting clampls etc.

Road Restoration Chargers for pukka road (as per specifition)

Excavation of Earth, Erection of Structure and installation of 33 KV Line Isolator, Grouting and Plinthing of completed Structure with fabrication work if required.

Construction of 11 KV Double Poles (Cable Riser) : Excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (900×600)mm and having depth of 1/6th of the full length of the support & Erection of support. The work includes carriage and handling of supports from site store to pit site. 11 Mtr. ST Pole

Erection and grouting of 2 Nos. 11 Mtr. ST Pole pole for making DP Structure including & fabrication fixing of M.S. Channel, M.S. Angle disc. insulators, pin insulators, stone pad, number plate, danger board, barbed wire etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m × 0.45 × 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.

SHASHI ENTERPRISES (BID ID -4709650)

Hi-tech power transmission (BID ID -4709674)