EEE-III/RZ/NZ/TC/2021-22/19.2

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as redq. Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recessed including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (b) 25 mm

S/D following size of FR PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd. (a) 3x2.5 sq mm

(c) 6X2.5 sq mm

(d) 3X 6 sq mm

Supplying and fixing metal box of 180mmx100mmx60mm deep (normal size) of surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 6pin,5/6 amps and 15/16amps socket outlet and 15/16amps piano type switch connection painting etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 2 + 8, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 40 amps

(b) 63 amps

Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size in the existing masonry open duct as required. Upto 35 sq.mm

Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size on wall surface as required. Up to 35 sq,mm (clamped with 1mm thick saddle)

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Earthing with GI Earth pipe 4.5longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required.

Providing and laying earth connection from FRL SOM earth electrode with 6SWG dia GI wire in 15mm dia GI pipe with FRL Som earth electrode i/c connection with G.I thimble excavation and refilling as required.

Providing and fixing 25mm x 5mm GI strip on surface or in recess for connections etc as req.

Supplying and fixing PVC Batten/ Angle Holder including connection etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supply of 2x10 mm2 XLPE insulated and PVC sheathed armoured cable of 1.1KV grade conforming to IS 7098(1988) part-1 as required.

Providing and fixing extra conduit down rod of 20 mm dia, 2 X 10 cm length, wiring with 2 X 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

supplying and fixing of stepped type Electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supply of 1200 mm sweep,BEE 5 Star rated,ceiling fan with Brush Less Direct Current (BLDC) Motor,class of insulation : B,3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,Power Factor not less than 0.9,Service Value (CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS:374-2019),THD less than 10%,remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers,temperature rise=75 degree C (max.),insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply, complete as reqd.

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100Amp,30KA,FPMCCB

(b) 250Amp,50KA,FPMCCB

Supply of 375mm sweep exhaust fan complete with blades, shutter etc as required

Supply, installation ,testing & commissioning of LED tube type fixture 20 watt rating complete with Extruded Aluminium Batten prewired with hogh Efficient LEds.with the following (a) Total system wattage -20 watt +/- 5 % (b ) Luminous efficacy - >= 95 Lm/watt (c) Power factor >= 0.95 with connections etc. complete as reqd.

S/I/T/C of Surface mounting CRCA housing 12W LED luminaire with acrylic cover diffuser with following specifications including fixing on existing wall/surface with connections as reqd. (a)Total system wattage = 12watt +/- 5% (c )Luminous efficacy >=95 lumens /watt. (d)Power factor >=0.95

Supply, installation ,testing & commissioning of surface mounting CRCA housing 36 watt LED luminaire with Acrylic cover diffuser with following specifications i/c fixing on existing wall/surface with connections as reqd. (a) Total system wattage = 36 watt +/- 5% (b) Luminus efficacy >= 95 lm/wt (c) Power factor > = 0.95

SITC of 150W LED flood Light fitted with lens Fixture made of pressure die cast aluminium housing & toughned glass cover i/c mounting bracket complete with the following specification as reqd. (a) total system wattage = 150 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection IP66

P/F Hot press sheet moulded compound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof pole box of inner dimension 200x140x95mm (NS) complete with suitable arrangment for fixing of 4 nos of 6 to 32 amp single pole MCB & 63 Amp. Double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with 2 Nos of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc as reqd.

Replacement of fan condenser 2.5mfd as required.

Rewinding of AC ceiling fan of all sizes and make i/c oiling, greasing as required. New Model (LIGHT WEIGHT)

Replacement of ball bearing of size 117/120 NBC equivalent SKF make as required.

Supplying, lowering,testing and commissioning of vertical type, multistage, totally enclosed Oil filled deep well submersible pumping set complete i/c connection etc. as reqd. (a) Single Phase 1.5 HP having discharge of 72 LPM Approx. at 49 M Head

P& F following sizes of PVC insulated and PVC sheathed copper conductor 3 core submersible cable conforming to IS 694/1990 etc as reqd. (a) 3x2.5 sqmm.

SITC of cubical type control panel board for single phase & three phase submersible pumping set up to 1.5 HP rating complete with contactor , relay, MCB, condenser , Volt meter, ammeter and indication lamp etc i/c connection as required.

Supplying & replacement of 7 watt LED lamp including connections etc as required