Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹6.4 L+₹26,242.50 (4.28%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L2 | Rejected-Finance Not being lowest tenderer | |
| 3 | L3₹7.4 L+₹1.3 L (20.9%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Not being lowest tenderer | |
| 4 | L4₹8.3 L+₹2.1 L (34.8%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance Not being lowest tenderer |
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
5 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Garrison Engineer I Asvini
Assistant Garrison Engineer I Asvini RC Church Colaba Mumbai
REPAIRS TO MISCELLANEOUS BR NATURE WORKS FOR TEMPORARY BUILDINGS AT INHS ASVINI
2024_MES_640947_1
8435/E8
Open Tender
Civil Works
Item Rate
270 days
Assistant Garrison Engineer (I) Asvini RC Church
Class E and above and Category a(i)
7 documents required · 7 mandatory
₹500
Assistant Garrison Engineer (I) Asvini
₹19,980
Yes
30 Mar 2024
6 Feb 2024
6 Mar 2024
6 Feb 2024
5 Mar 2024
20 Feb 2024
6 Feb 2024 - 27 Feb 2024
Amount
Demolition of brickwork/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified by Engr-in-charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for complete all as specified by Engr-in-charge.
Dismantling of stone slabs and tiles of any description or thickness in floors, arpons etc.
Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat of any thickness and rubbish off the premises. Note: The place of disposal shall be find out by the contractor.
Dismantling of Mangalore pattern roof tiles including ridge tiles in roofing all as directed Note :- Quoted rates shall be deemed to be included necessary scafolding upto 25 mtrs and safety arragement for item No 1 to 20 of BOQ.
Dismantling of battens for tiles, shingles etc of any size including tilting fillets,spaced exc 15cm all as directed.
Dismantling of wooden boarding any description, fixed in any position with nails.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof coverings complete all as specified.
M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails, framing for CGI sheet chajja and the like fixed with angle cleats and connecting plates etc complete confirming to Fe-410- W(Gde?E-250) quality including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge (upto 08 storey ht of bldg).
M& L roof tiles, manglore pattern, interlocking at side joints laid dry all as specified.
M&L for Ridge or hip tiles to suit manglore pattern of roofing tiles, bedded and jointed in CM 1:6 all as specified.
M&L 2nd class harwood clean sawn battens at 20cm centres in sectional area exc 5 Sqcm but n.exc 15 Sqcm all as specified
S & F Second class hard wood boarding planed one side 20mm thick with edges tngue and grooved or rebated all as specified.
-Ditto- as item No 16 above but fixing only for the items obtained from dismantling
S & F in repairs weatherboarding, hardwood 2nd class, clean swan, plain, 20mm thick as in barge, facia, eaves etc.complete all as specified and directed
M&L preparation of surfaces of wood and wood based materials, new or old of any descripiton and girth not other wise described and treated with creosote all as specified
M&L preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete
M&L for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application above the boarding of roof to arrest leakage including removal of previous APP complete all as specified and directed by Engr-in-charge.
Taking down and supply and fixing aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto ceiling level as required on site with adjusting level and fixed to roof slabs by means of GI clamp 60mm long made out of 40 x 3mm GI flat and expansion hold fastner 12.5mm dia 40mm long @ 20cm c/c including dismantling carefully old false ceiling with ceiling boards, electrical fittings, fan, fire sencers etc and making good disturbed surface as per existing complete all as specified and directed . Note- Ceiling board will be measured & paid separately
S & F 12mm thick perforated particle board of size 600mm x 600mm fixed in aluminium snap grid in ceiling, making necessary holes, cutting for providing light, fan,fire cencers etc complete all as specified.
M&L granite (of any type) tiles 20 mm thick machine cut in floors, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in CM (1:6)
M&L granite (of any type) tiles 20 mm thick machine cut, in skirting/ dado etc. vertical surfaces laid over cement screed, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 10mm thick screed bed in CM (1:4)
M&L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20mm thick screed bed in CM(1:6)
Ditto all as per item No 26 but in riser of steps, skirting, dado and pillar etc including 10mm thick backing coat in CM 1:4 complete as directed
M&L vitrified ceramic tiles 10 mm thick (square/ rectangular) polished,area of each tiles not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM (1:6)
S&F glazed ceramic coloured tiles of size 300x450x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:4 complete all as directed by Engineer in charge.
S&F in repairs PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint, fixed to wall with suitable PVC clamps complete all as specified .
S&F in repairs PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint laid in floor or trenches complete all as specified .
Taking down cement plastering on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete work complete all as specified and directed.
Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.
M&L for taking up or down steel tubing and connections of 20mm bore complete all as specified and directed.
S&F steel water tubing of 15mm dia medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors in fair cutting grooves in brickwork etc complete all as specified and directed by Engr-in-charge.
S&F steel water tubing of 20mm dia medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors in fair cutting grooves in brickwork etc complete all as specified and directed by Engr-in-charge.
M&L for preparing surfaces plastered or unplastered on walls and priming surfaces with chalk whiting, on plastered surfaces, preparatory to distempering and applying two coats of distemper oil emulsion, white or tinted complete all as specified by Engr-in charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
S&F 4.80mm thick sheet glass ordinary quality and glazing with aluminium beading and rubber etc in square n exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge.
S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot and cold with long screwed shanks and fly nuts, fancy type screwed for iron/pvc/ppr pipes.
S&F in repairs 15mm bore Self-closing taps with elbow wrist operated long, cast copper alloy, chro-mium plated, screwed for iron pipe.
S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S&F in repairs Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets
S&F waste coupling of PTMT (half or full threaded)(minimum weight 32mm-45gms/40mm-60gms for WHB complete all as specified and directed.
S&F waste pipe for WHB/urinals 32mm dia including all fitting complete all as specified and directed by Engr-in-charge.
S&F in repairs 15mm bore 'fancy type' (chromium plated with long shank and cup (concealed type)) stop valve (one way/two way/ three way) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
S&F in repairs 15mm bore stainless steel braided hose 60cm long with connections complete all as specified and directed by Engr-in-charge.
S&F 110mm PVC (SWR) couplers complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed by Engr-in-charge.
S&F 8 to 10mm thick plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment also fixing with fabrication/ welding etc.of Gde Fe410
Material and labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide primer all as specified.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirallhy for hooping for coloumns, hooking end or in shelfs and binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed
M&L for formwork to flat soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.
M&L for cement concrete in foundations, filling, cuttings in roads, path etc and mass concrete etc of type C2 1:3:6(40mm graded aggregate) complete all as specified
M&L RCC Type B-1, 1:2:4 (20mm graded aggregate) on slabs supported on walls, beams and coloums in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered surfaces of walls and applying two coats of OBD complete all as specified and directed.
M&L Pergo tiles wooden mat finishes of size (1200x200x8 to 10mm) laid over PVC foam 5 mm thick with SR adhesive over 50 mm micron polythene sheet complete all as directed by Engr-in-Charge. Make- Pergo/TDC/Silicon including cornices fixed all around the floor having rounded angles, rounded nosings, tongued and grooved edge complete all as specified and directed by Engr-in-charge. Note : The colour of tile should be approved by Engr-in-charge.
S&F in repairs 15mm bore bib taps (chromium plated), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed but fancy type complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.
SN CONSTRUCTION
SHRI SAI ENTERPRISES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .