SPL REPAIR TO BLDG NO T-36 T-40 AND T-45 (OFFR ACCN) AT 898 AT BN BLDG NO T-25A (COOK HOUSE) AT 59 WEU AND BLDG NO T-125 (TOILET BLOCK) AND T-126 (COOK HOUSE) AT 59 ENGR REGT UNDER DETT-B OF GE 862 EWS

M & L for light shade or printed vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tiles, complete all as specified and directed.

M&L for non-skid coloured (light shade) ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:3) including dismantling of existing tile, complete all as specfied and directed.

M&L for coloured glazed ceramic tiles with highlighter tile in between vertical surface of size 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick cement plaster in CM (1:3), including dismantling of existing tile, complete all as specfied and directed.

M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after and including taking down GI tubing and connections , complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI water tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after and including taking down GI tubing and connections , complete all as specifed and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor, complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches/wall, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

Supply and fixing in repairs viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and directed.

Supply and fixing in repairs viterous China pedestal wash basin, white flat back, including waste pipe, waste chain and plug and porcelan stopper brackets, complete all as specified and as directed.

S&F in repair for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed.

S&F rotational moulded polythene three layered water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with brass tank nipples, including Ball brass valves suitable for 20 mm bore including dismantling of existing tank and removing to store, complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with Brass tank nipples, including Ball brass valves suitable for 20 mm bore including dismantling of existing tank and removing to store, complete all as specified and directed.

S&F in repair 15mm chromium plated health faucet (hand shower), inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as specified and directed.

S &F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

S & F in repair for stainless steel connection pipe 15mm dia for wash basin and flushing cistern with ss nuts of length 450 mm, complete all as specified and directed.

S & F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S&F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail, complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair for chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange,fixed with screw wooden / plastic cleats, complete all as specified and directed.

S & F in repair SS Towel Ring, complete all as specified and directed.

S&F in repair 15 mm dia CP two way bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm dia CP angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed.

S&F in repairs gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed.

S&F in repairs gun metal globe or Brass gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed.

S&F in repair CP grating with floor trap suitable for 75 mm bore floor trap and fixed with white cement in square or circular shape and with provision of hole for waste pipe connection, complete all as specified and directed.

S & F in repairs premium multipurpose wall mounted storage cabinet with mirror of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.

S & F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as specified and directed.

S & F for aluminium powder coated of any colour window and ventilator with one or more shutters fixed / side hung type without sash bar , aluminium section weighing 0.55 kg/m including 5mm thick plain/ coloured/ frosted sheet glass, stainless steel wiremesh and connected items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21 100mm long , suitable handle, alum tower bolt, complete all as specified and directed. Note :- Minimum thickness of powder coating not less than 50 micron.

S & F for aluminium powder coated of any colour door with one or more shutters aluminium section weighing 0.55 kg/m including 5 mm thick plain/ coloured/ frosted sheet glass or ACP sheet and stainless steel wiremesh and connected itmes such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long , hinges type B-21 100mm long , suitable handle, alum tower bolt including mortice lock, aluminium hydraulically door closer and brass door stopper, complete all as specified and directed. Note :- Minimum thickness of powder coating not less than 50 micron.

S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, holdfast with and including concrete bed block, lock strike plates, complete all as specified and directed.

All as per Item No 36.00 here-in-before, but frame size of 105x60mm.

S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a);of MES schedule 2009, part-1 (specifications), complete all as specified and directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per Item No 40.00 here-in-before but without glazing bars.

S & F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 including dismantling old one, complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and directed.

S &F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled, complete all as specified and directed.

S & F 125 mm long extruded anodised aluminium alloy handle, fabricated type, complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair SS curtain rod 20mm dia (of approved colour and design), complete all as specified and directed.

S&F in repair curtain brackets with finials of SS type (of approved colour and design) including fixing to walls with MS full screws(including fixing of wooden pieces of required size of walls), complete all as specified and directed.

M&L for plain cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in sub base, including dismantling of old cement concrete any type, complete all as specified and directed.

Demolition of Brickwork or stone/bou-lder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.

All as per Item No 56.00 here-in-before but except stone. Note: Stone retrieved from Item No 55.00 will be re-used.

M &L for rendering 20mm thick in cement mortar 1:4 on stone surfaces of walls any typeand any height finished even and smooth without using extra cement, complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for Rendering 15 mm thick on fair faces of brick, stone or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a one coat primer and 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:4 with water proofing compound @ 3% by weight of cement over 10mm thick in CM 1:6 on external surfaces of walls of block masonry finished even & smooth without using extra cement, including wiremesh wherever required and rendering height up to four (04) storey building complete all as specified and as directed. Note: The rate to be included integral water proofing compound.

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of apex ultima of over and including a coat of primer, complete all as specified and directed.

M&L for Complete removal of existing treatment on old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make, complete all as specified and directed.

M & L for Rendering 5 mm thick on fair faces of brick/stone work or concrete surface in CM (1:3) as in ceilings, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new plastered surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of primer including 1mm thick wall care putty in ceiling, complete all as speicied and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight), complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (multi colour pattern) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour (multi colour pattern) having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions including dismantling of old sheet of any description and making good the disturbed surface, complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall / ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling panelling inclusive of fixing on walls to make PVC frames complete per standard specification after dismantling of old unserviceble PVC lining of any type complete all as specified and directed.

S&F 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc and making good the disturbed surface, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, ends, swan-necks,etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints in eaves gutters, with all fittings such as elbow, Equal Tee, coupling, 'Y' Tee etc, including MS clamp and holding arragment for MS steel, complete all as specified and directed.

M & L for coloured chequered cement concrete tiles of size 300x300x25 mm thick with grey cement and pigment laid over and including 20mm thick cement screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor including dismantling of old tiles incl cement mortar bedding (but not the backing) and removing rubbish off the premises, complete all as specified and directed.

M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc including taking down old granite stone slab, complete all as specified and directed.

M&L for providing Mirror polished kota sotne slab flooring 18-20 mm thick over and including 20 mm thick screed in Cement morter1:3 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing including dismantling of old kota stone slab in any type, complete all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 after dismantling old unserviceable skirting, complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as directed and as directed.

M&L for ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work (18/19mm), complete all as specified and directed.

M & L for 75mm thick cement concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as in sub base for tiling including demolition of old cement concrete, complete all as specified and directed.

Demolition of reinforcement cement concrete in roofs, beams, staircase, chajjas and similar suspended work, complete all as specified and directed.

M & L for RCC type B1 1:2:4 (nominal mix) 20 mm graded stone aggregate in slab for cooking platform, supported on wall, beam and column in floors, roofs, landing, balconies, canopies, Chajjas etc, complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia & above, cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip, complete all as specified and directed.

M&L for form work to side & soffits of suspended slabs such as roof slab, floor slab, landing and similar work: not exceeding 200 mm thick (Horizontial or sloping ), complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of 2mm putty to make the surface even & smooth, complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:4) with water proofing compound @ 3% by weight of cement, on brick work or concrete surfaces and finished the surfaces even and smooth without using extra cement, complete all as specified and as directed. Note: Cost of WPC shall be included in the rate of this item.

M & L for Preparing new surfaces on walls plastered or unplastered and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of Asian or equivalent( in multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, holdfast and concrete bed block complete with outer side glazing bars shutter and inner side wire mesh shutter including glass panes, dovetailed or welded, complete all as specified and directed.

All as per Item No 91.00 here-in-before but without glazing bars.

S & F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S & F 140mm long floor door stopper of alu alloy body and tongue with hard drawn steel spring, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.

M & L for joist, channel, angle, MS tubular pipes or tee sections, fixed independently with or without connecting plates, cut to ordinary lengths i.e within 20mm of the lengh given, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M & L for Rendering 10mm thick on fair faces of brick/stone work or concrete surface in CM (1:6)as in wall, finished even and smooth without using extra cement, complete all as specifed and directed.

M & L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed.

M&L for Preparation of old plastered surface of wall and applying one coat of exterior emulsion weather proof paint of approved colour (multi colour pattern as approved by GE), complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks/WHB, complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs vitreous china water closet Padestal pattern( white ) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral foot rests incl provn of lime concrete bedding including connections to trap and to flushing cistern/ pipe, complete all as specified and directed.

S & F in repairs concealed type Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F in repairs Vitreous China Wash hand basin white, flat back, size 630x450mm size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repair assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.

S & F in repair for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed.

S & F in repair PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting all as specified and as directed.

S & F in repair 15mm dia brass CP fancy type bib tap cast copper alloy with cruten or butterfly handle, screwed down, screwed for iron pipe, complete as specified and directed.

Sch 'A' Part-II (E/M works) Taking down U/S copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed, complete all as specified and directed.

M&L for point wiring for one light point/ fan point/ one bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor singel core cable (green colour) as earth lead and including PVC conduit along with modular sunken boxes of required size with modular white cover plate with frame including cutting chaes to wall making good the disturbed surfaces to mathc with the existing specificaiton, complete all as specified and directed. Note: The rates are inclusive of cutting/ chasis in wall & suitable PCC works inclding making good to disturbed surfaces.

All as per Item No 116.00 here-in-before but for socket outlet 5 Amp on same board.

All as per Item No 116.00 here-in-before but for socket outlet 5 Amp on independent board.

All as per item No 116.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed.

M&L for point wiring 4 sqmm FRLS PVC insulated unsheathed multistrunded copper conductor cable and one single core 4 sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing and caping medium grade with all fitting (ISI Marked) along with modular sunken boxes of require size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

S&F modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed.

S&F modular switch, single pole, one way 16 Amps 240 volts, complete all as specified and directed.

S&F modular socket outlet 2/3 pin, 2 module, 6 Amps, 230 volts, complete all as specified and directed.

S&F modular socket outlet, multipurpose, 6/16 Amps, 2 module, 230 volts, complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm PVC insulated, FRLS type, unsheated, multistranded, flexible, copper conductor cable 1.5sqmm, 1100 volts grade drawn through and including in PVC conduit of suitable sixe as required at site with all accessories such as Tee, corner, overlaping connector etc on surface walls, roofs and ceilings etc including concealed MS box factory made of suitable size for modular switch socket including modular cover plate and frame suitable for fixing and fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regularors etc and including 1.5 Sqmm PVC insulated multistranded, unsheathed (Green Colour) FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for one light point/ fan point controlled by one swtich.

One light point/ fan point/ bell point controlled by one switch, complete all as specified and directed.

One socket out let 5 Amp point controlled by one switch one way on same switch board.

One socket out let 5 Amps point controlled by one switch one way on independent board.

All as per item No 125.00 here-in-before, but point wiring 2.5 sqmm for one 3 Pin, 16 Amps, socket outlet point controlled by one 16 Anos switch on independent board.

S&F switch single pole way 6A, 5 Amp, 240 volts complete all as specified and directed.

S&F socket outlet 2/3 pin, 6Amp, ISI marked, 230 volts, complete all as specified and directed.

S&F switch, single pole one way 16Amp, 240 volts, complete all as specified and directed.

S&F socket outlet 6/16A, 6 pin, combined ISI marked, 230 Volts, complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling caities with filler, one coat after cleaning all dust including refixing the same, complete all as specified and directed.

S&F in repair modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%, 240 volts AC and connecting electrically complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals, 63.5 x 17mm PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F bell buzzer, ding dong 230 volt, complete all as specified and directed.

S&F lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/ angular/ pendent fittings, complete all as specified and directed.

S&F LED lamp 9/12 watt inverter bulb, B22 CDL, suitable for lamp holder, complete all as specified and directed.

S&F in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, complete all as specified and directed.

S&F in replacement LED street light fitting 35watt, 230 volts AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with bracket bend to shape made as required of 32/40mm dia not less than 1.2mtr long GI pipe light grade fixed to pole/wall with flat iron clamp of size not less than 40x6mm , complete all as specified and directed.

S&F in replacement LED luminaire 600 x 600 mm, 35/36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivber, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F in replacement recess mounting high lumen LED flat panel 2' x 2', 36watt white power coated CRCA housing with high poewr LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230v, complete with all accessories such as electronic driver, LED strip, connector block etc and necessary fixing arrangement at any height and removing old unserviceable item, complete all as specified and directed.

S&F in replacement of LED street light fitting 30watt, 230volt, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theremal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

S&F in replacement LED light fitting 1 x 13.5watt bulkhead luminairs including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Taking out unserviceable ceiling fan and deposit to MES store, supply and replacement with ceiling fan 230volt 50Hz, AC, 1200mm sweep, min air delivery 210CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core 0.75sqmm PVC insulate copper conductor cable, complete all as specified and directed.

M&L in replacement for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

S&F AC socket with 20Amp MCB with Sheet Metal enclosure with IP-66 and shock proof, complete all as specified and directed.

S&F in replacement submain wiring with 2 runs of 6 sqmm, PVC insulated FRLS unsheathed copper conductor two single core, multistranded, flexible copper conductor cable and 6.00sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green colour) as earth lead and including PVC conduit along with including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board, double door TPN with IP-66 protection single phase 415 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

M&L in replacement sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

S&F in replacement for MCB distribution board, double door single pole and neutral with IP-42 protection single phase 240 volts 4 way, duly painted with opoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoing complete with 200Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removal, gland plate including removing old unserviceable item, complete all as specified and directed. Note:- MCBs will be measured separately.

M&L for MCB TPN 415 volts any rating upto 100 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv, complete all as specified and directed.

M&L for MCB single pole and neutral 240 volts any rating upto 32Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

M&L for MCB single pole 240 volts any rating upto 6 to 32 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core including taking out old unserviceable cable, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out old unserviceable cable, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/ loose soil, complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm, complete all as specified and directed.

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose.

M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick complete all as specified and as directed.

Supply and laying GI pipe 40mm bore light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/ under road/ floor/ pole/ wall etc for protection of cables including clamping of pole/ wall in proper size of clamps, nut bolt, washer et, complete all as specified and directed.

Supply and laying GI pipe 50mm bore light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item complete all as specified and directed.

Supply and fixing service cable 1100volts grade 16x2 sqmm heavy duty cable PVC insulated aluminium condutor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate vertically to a depth not less than 1.5 mtr below normal ground level, connecting to the galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthwire protected by provision of GI light grade pipe 15mm dia including provision of concrete pit made from PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75mtr long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I, connected to earth test point all as specified or indicated including testing on completion, complete all as specified and directed.