Supply, Installation, Testing and Commissioning of street lights at Various places in Shopian town

Supply installation testing and commissioning of 45W (±3W) LED streetlight having single piece housing made of pressure die-cast aluminium allow (ADC12/LM6). The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted/welded/mechanically joined to the luminaire housing to ensure robust design. The luminaire shall have Integrated polycarbonate front cover/lens only. Fitting with glass front cover shall not be considered. The luminaire shall have dusk to dawn feature (Digital on & off control) basis longitude & latitude (No electromechanical components like relays/sensors shall be acceptable). The luminaire shall be IP66 & IK07 compliant. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. Control gear compartments shall be top maintainable only. The luminaire shall have The LED luminaire shall use LEDs with CCT 5700°K, CR≥70, SDCM≤5 & Life of 50K Hrs @ L70B50. The luminaire shall deliver minimum system efficacy of 120lm/w. The luminaire shall use Potted driver having THD≤ 10% (@ full load), PF≥ 0.95 (@full load), can survive Input voltage stress 440V for 8 Hrs, can survive Input voltage stress 320V for 48 Hrs, can survive Input voltage stress 100V for 48 Hrs, High Voltage cut-off @ 320V (±15V) with auto re-start at 300V to 315V, Low voltage cut-off ≤ 120V with Auto-Restart at 120V (±15V), Operating voltage of 140V to 270V, In-built Surge Protection of 4KV (CM & DM). The LED driver shall have efficiency ≥85%. The LED driver shall be BIS registered. The luminaire shall have 10KV SPD placed in-side the control gear box of the luminaire. The luminaire shall have Electrical Insulation of Class I. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer within 15 days of award of LOI. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approval: LM79 as per 2019 standard issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, IK Test report for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. The luminaire shall be with 5 years replacement warranty against any manufacturing defects /malfunctioning. Approved makes Philips/ LT/Wipro/ equivalent standard make to be desired by engineer incharge. ( sample to be approved before installation)

Supply and fixing of 0ne way arm bracket for mounting the luminaire on the top of the pole/ with the wall etc fabricated out of 0.9mt long, 50mm diameter G.I. pipe, along with iron clips, nuts and bolts for holding the luminarie. ( sample to be approved before fabrication)

Providing and fitting of M.S. junction box with suitable size clamp.The junction box shall be fitted with 4 pole 32 amp backelite connector and 3-6amp MCB 1 No. schinider/Legrand make. Also a suitable clamp to be provided with junction box for proper fixing of junction box.

Providing of service connection and earthings to luminaire from the junction box in 1.5 mm PVC insulated, multicolour copper wire .

S/L , testing and commissioning of, XLPE Insulated, PVC Alluminium un-armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.

a) 10 sq.mm 2 core

b) 6 sq.mm 2 core