Modification of proposed IMFL shop at Mayabunder

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

12 mm cement plaster of mix:

1:6(1 cement: 6 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour

Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

One or more coats on old work

With cement mortar 1:4 (1cement: 4 coarse sand)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Of area 3 sq. metres and below

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

Two or more coats on new work

Providing and laying hollow cement concrete block walling 200mm thick consisting hollow block of size 400X200X200mm of mix 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone aggregate 10mm nominal down size) having a crushing strength of 3.5N/mm2 at 28 days as per I.S. 2185(Part-I) 1979 laid in cement mortar 1:6(1 cement : 6 coarse sand)

Providing and fixing height adjustable floor standing metal shelves (heavy duty) end cap rack of approved quality of height 2.10 m and depth 0.45m having 5 shelves and the height between two shelves is 0.35m, all as per approved drawings and as per the direction of Engineer-in-charge.

Providing and fixing Billing Counter 'T" shaped model with 19mm laminated finish HDF board/19 mm thick marine ply with laminate including flap door, side door, draws with telescopic channel, shutters, locking arrangement, handles, hinges, all required fittings, materials etc. complete as per approved drawings and as per the direction of Engineer-in-charge.

Providing and fixing vinyl on grey laminte finish and stickering as per approved drawings and as per the direction of Engineer-in-charge.

Providing and fixing Name Board of frame size 3.0x0.60m in Backlit Acrylic sheet with "Logo & ANIIDCO LIQUOR STORE" etc. all complete as per approved drawing and as per the direction of Engineer-in-charge.

Providing and fixing of 19mm thick marine ply with laminate finish or HDF board laminate finish on dry wall as per approved drawings & as per direction of Engineer-in-charge.

Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Providing and fixing LED tube light - 20W of make Philips, Luker or equivalent to ISI standard.

Providing and fixing LED 9W indoor ceiling spot light/focus light speciallay designed for commercial usage long life Make: Crompton or equivalent in Bajaj/Havells/Philips etc.

1 x 2.5 sq. mm

Providing and fixing wall hanging LED smart TV of size 43" with suitable accessories for hanging the TV of approved brand like LG or equivalent to Samsung/Panasonic etc as per direction of Engineer-in-charge

Providing and installation of 2KVA invertor along with 2 nos 200ah battery including all accessories of approved brand like V guard or equivalent toLIVguard/Microtech etc as per direction of Engineer-in-charge

Please Enable Macros to View BoQ information