VALVE ASSEMBLY, Compressor control

Special Eligibility Criteria

1. 1

   Supply to be as per tender specification.

   Document optionalConfirmation required
2. 2

   Railway reserves the right to purchase bulk or entire quantity from those sources who have been approved by BLW for the Parent Assembly - UNLOADER PNL ASM KIT -BLW Part No.17062263 for tendered item (BLW Item ID: ID: 2201177,) on or before the date of tender opening. For detailed conditions, tender conditions in the link shall be referred. Approval status of the firm will be reckoned as on the date of tender opening and not thereafter. But in case of downgrading/removal/suspension/banning etc., after opening of this tender, such changes shall be taken into account while considering the offers. For details regarding ordering on Approved / Developmental vendors please refer para 3.2 & 3.3 of Part B tender conditions

   Confirmation required

Check List

1. 1

   Have you attached any performance statements with your offer? For proof of supply to other railways / production units copy of Inspection certificate and receipt note / certificate must be uploaded. Non-submission of such vital documents may be taken as their not having any such past performance.
2. 2

   Have you furnished the statement of deviations?[preferably nil]
3. 3

   Please check our website before submitting offer, whether any corrigendum to the tender has been issued or not.
4. 4

   Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers.

Commercial-Compliance

1. 1

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.

   Confirmation required
2. 2

   [a] Tenderers are hereby instructed to supply the tendered quantity to the respective consignee(s) as indicated in tender document. [b] If tenderers mention anywhere in its offer contrary to (a) above and/or mentions not to supply to some of the consignees, such offer may not be considered for ordering for such consignees where the tenderer has not agreed to directly deliver the stores without any back reference.

   Confirmation required
3. 3

   Goods and Service Tax (GST) shall be applicable as per GST act (Please refer para 14.0 (a to h) Part-A of tender condition.

   Document optionalConfirmation required
4. 4

   As per Section 171 of GST Act 2017, as a remedy against anti-profiteering, INPUT TAX credit benefit if any accrued should be passed on to the Purchaser as reduction in Basic Price, or else the following certificate should accompany the bill: It is certified that no INPUT TAX credit benefit has accrued on materials invoiced/billed for, that can be passed on to Purchaser. B) Firm should submit the Invoice/Bill clearly indicating the appropriate HSN and applicable GST rate thereon duly supported with documentary evidence. C) Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to the purchaser without any undue delay. [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC

   Document optionalConfirmation required
5. 5

   The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored.

   Confirmation required
6. 6

   Whenever tender is floated with purchase restriction from sources approved by nominated authorities and there exists a suspected cartel situation by approved sources or the rates available from approved source/sources are adjudged unreasonably high, despite fair efforts as permissible, the purchaser reserves the right to place orders on firms outside the approved vendor list, without any restrictions.

   Confirmation required
7. 7

   [a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Directorate of Handicraft & Handloom or any other body specified by Ministry of MSME. [Name the agency clearly]. If yes, then for availing benefits under MSME Act, should upload valid documents maintained under MSME Act such as NSIC Certificate etc duly marking the tendered item in the certificate. Otherwise, claim for benefits under MSME Act may not be entertained and also indicate whether the Enterprise is owned by SC/ST/woman. Please upload documents in support of this. [b] If you are not a MSE or consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprises. [In percent of order value] with further breakup of MSE owned by SC/ST [Information will be provided in percentage terms with 6 fields; Micro owned by SC, ST, Others and Small Industries owned by SC, ST and Others]. [c] Please refer Para 15.0 Part-B of tender conditions.

   Document optionalConfirmation required
8. 8

   Tenderers may note that their Offered delivery schedule should clearly indicate the starting time, rate of supply and finishing time. Firm should refrain quoting vague delivery schedule like 02 to 12 months or like 06 to 10 months.

   Confirmation required
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions

   Confirmation required
10. 10

    Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

    Document optionalConfirmation required
11. 11

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   In the event of rejection of pre-inspected materials at the consignee's end, a penalty of 5% of the value of the rejected goods shall be levied on the supplier for each such instance of rejection. This penalty shall be in addition to any any other penalties and punitive actions available under all the terms and conditions of the contract.

2. 2

   I/We have carefully gone through the IRS Conditions of Contract, 2025 (included and uploaded along with the bid document) particularly Clause 20 pertaining to "Code of lntegrity: Misdemeanours and Penalties" and the provisions regarding Code of lntegrity, Obligations for proactive disclosures, Misdemeanours, Penalties for misdemeanours (as per attached document, Annexure-E). I/We hereby certify that no other concerns or affiliates (such as having common partner/director/ promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anticompetitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions, and enclosures. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest, anti competitive practices and obligation to proactive disclosures. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.

3. 3

   No deviation is permitted with respect to the validity of offer(i.e 90 days) or else offer will be summarily rejected