Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAdmitted-Finance 208 4 DURGAPURI EXTN DELHI 110093 | DELHI | NORTH EAST DELHI | DELHI | 110093 | ₹2.3 L | L1 | Admitted-Finance |
| 2 | L2₹2.3 L+₹1,620 (0.70%)Admitted-Finance | ₹2.3 L+₹1,620 (0.70%) | L2 | Admitted-Finance |
| 3 | L3₹2.7 L+₹39,005 (16.9%)Admitted-Finance 91 ENGINEERS ENCLAVE 1ST FLOOR PITAMPURA DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | ₹2.7 L+₹39,005 (16.9%) | L3 | Admitted-Finance |
| 4 | L4₹2.7 L+₹39,355 (17.0%)Admitted-Finance | ₹2.7 L+₹39,355 (17.0%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | B R CONSTRUCTION CO L4 | Mayur Enterprises L2 | Priyanka Enterprises L1 | Sri Sai Enterprises L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | PETROL OPERATED CHAIN SAW
Engine :SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT:2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for beter Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. oii Pum Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. |Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/s | 1 | nos | 40,100 ₹40,100 | 51,879 ₹51,879 | 36,999 ₹36,999 Lowest | 40,000 ₹40,000 |
| 2.00 | PETROL OPERATED BRUSH CUTTER
Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compernsator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right lhandle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 |Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certification | 3 | nos | 50,050 ₹1,50,150 | 36,979 ₹1,10,937 Lowest | 41,999 ₹1,25,997 | 50,000 ₹1,50,000 |
| 3.00 | TELESCOPIC PETROL OPERATED POLE PRUNER Engine :
Single Cylinder, 2 Stroke, Air cooled Only Displacement: Should be between 25-30 CC POWEROUTPUT: Should be minimum 1.2 HP Weiaht (Dry without cutting attachment & fuel ): Should not be more than 7.5 Kg Fuel tank capacity (ml): Should be minimum 400ml Chain oil capcity (ml): Must have minimum 200 ml. lClutch: Clutch shoe linining should be metal only. Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pítch should be 1/4" OR 3/8Picco only and drive link thickness must havel 1.1 mm or 1,3 mm. Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket. Equipment total Length with guide bar and chain ( cm ): Should be mimimum l220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A) vibration Measurement m/s2 at control handle - Extended Poistion : Should notl |be more than 5.5 m/s2 Certification: Must have TUV certification with test standard EN ISO 11680. | 1 | nos | 80,100 ₹80,100 | 69,799 ₹69,799 | 67,999 ₹67,999 Lowest | 80,000 ₹80,000 |
Tender Value
₹2.9 L
EMD Value
₹5,000
Closing Date
19 Aug 2026, 3:00 pmClosed
DDH/SHNz
V.Sathish Kumar
Supply of Petrol Chain Saw, Petrol Brush Cutter, Telescopic Petrol Pole Pruner at Dilshad Colony, Ward No.217 in Horticulture Department, Shahdara North Zone.
2026_MCD_287428_1
DDH/SSN/MCD/2026-27/NIT No.1
Open Tender
Civil Works
Item Rate
Shadra north Zone
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹5,000
24 Aug 2026
12 Aug 2026
19 Aug 2026
12 Aug 2026
19 Aug 2026
12 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | PETROL OPERATED CHAIN SAW
Engine :SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT:2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for beter Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. oii Pum Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. |Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/s | 1 | nos | 3,582 | ₹3,582 |
| 2 | PETROL OPERATED BRUSH CUTTER
Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compernsator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right lhandle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 |Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certification | 3 | nos | 3,582 | ₹10,746 |
| 3 | TELESCOPIC PETROL OPERATED POLE PRUNER Engine :
Single Cylinder, 2 Stroke, Air cooled Only Displacement: Should be between 25-30 CC POWEROUTPUT: Should be minimum 1.2 HP Weiaht (Dry without cutting attachment & fuel ): Should not be more than 7.5 Kg Fuel tank capacity (ml): Should be minimum 400ml Chain oil capcity (ml): Must have minimum 200 ml. lClutch: Clutch shoe linining should be metal only. Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pítch should be 1/4" OR 3/8Picco only and drive link thickness must havel 1.1 mm or 1,3 mm. Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket. Equipment total Length with guide bar and chain ( cm ): Should be mimimum l220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A) vibration Measurement m/s2 at control handle - Extended Poistion : Should notl |be more than 5.5 m/s2 Certification: Must have TUV certification with test standard EN ISO 11680. | 1 | nos | 3,582 | ₹3,582 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
BOQ_335360.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .