Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹34.0 L+₹1.0 L (3.09%)Rejected-Finance 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹35.8 L+₹2.8 L (8.62%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L3 | Rejected-Finance Other than
lowest
bidder | |
| 4 | L4₹37.7 L+₹4.7 L (14.3%)Rejected-Finance 763 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UTTAR PRADESH | 284401 | L4 | Rejected-Finance Other than
lowest
bidder | |
| 5 | L5₹38.3 L+₹5.4 L (16.3%)Rejected-Finance 1308 MAIN ROAD BABINACANTT DIST JHANSI 284 401 | BABINA | JHANSI | UTTAR PRADESH | 284401 | L5 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
REPAIR/ MAINTENANCE OF DOOR, WINDOWS, PARTITION ETC IN OLD CAMP AREA UNDER AGE B/R II AT BABINA CANTT
2023_MES_595905_1
8121/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹84,000
Yes
11 Jul 2023
16 May 2023
16 Jun 2023
16 May 2023
14 Jun 2023
31 May 2023
Amount
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed
Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed
S&F for 30 mm thick locally made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.
S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters (locally made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.
S&F 30mm thick locally made plain framed, panelled Shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F Rubber door seal 50mm wide and 5mm thick with aluminium strips of size 19mm wide and 2mm thick fixed with machine steel wcrew with washer, fixed in repair complete all as specified and directed.
S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.
S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.
S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions.
S&F 30 mm thick Rajshri Brand factory made solid panel prelam PVC internal door shutter consisting of frame made out of M.S. tube of 19 mm guage thickness and size of 40mmx20mm for stiles as well as top, lock & bottom rail. M. S. frame shall have a coat of metal primer of approved make and manufacture. M S frame shall be covered with heat moulded prelam C channel made from 5 mm (+ - 0.5) thick PVC sheet of Density 600 Kg/Cbm manufactured by an ISO -9000 certified company, of size 30 mm thickness, 110 mm width forming stiles in which 100 mm should be flat & 5 mm should be taper, and 5 mm (+- 0.5) thick, 135mm wide PVC sheet for top rail and bottom rail in which 125 mm should be flat & 5 mm taper on either side of panel, also for lock rail 145 mm sheet , 125 mm should be flat & 5 mm taper on either side. an additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of C Channel using PVC solvent cement adhesive. Panelling of 10 mm prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails width 30 mm wide x 5 mm (+-5) x3 thick , 20 mm wide cross PVC sheet as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos Powder coated butt hinges of size 100 mm and 50 mm long steel screw drilled suitable to pass through both the walls of the MS tube. Other hard ware of door shoulf be fixed with 25 mm *8 mm size sheet screw etc. complete all as specified and as directed by the Engineer-in-Charge.
S&F 30mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I para 8.24 (b).
M&L for 2nd class hard wood for plain, solid, straight chowkats and frames for doors, wondows, ventilators etc. wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and as directed.
S&F in repair steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed.
S&F in repair steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed.
S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.
S&F in replacement stainless steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.
S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.
S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed.
S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
S&F 150 mm Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor complete all as specified and as directed.
M&L for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.
S&F in repair 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F for 4.8 to 5mm thick Sheet glass of size exc. 0.5 Sq. m each pane, ordinary quality duly covered with tinted solar control film 25 micron, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge.
S&F stay/ handle cleat as per requirement at site and fixing with necessary nut, bolts or welded to complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and as directed by the Engr-in-Charge.
S&F powder coated aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91mmx44.45mmx1.3mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.
M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.
S&F in powder coated aluminium window (double shutter double leaf ) side hung type with stainless steel but hinge, one shutter glazed with and including 4mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket stopper aluminium grills of aperture size of grill 70 mm, aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 100mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm after taking down old steel/Aluminium/ wooden windows complete with all fittings etc and making good the disturbed surfaces by plastering and destempering/painting etc complete all as specified and as directed by the Engr-in-Charge.
S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed.
S&F 5mm thick 3 ply Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work or aluminium saction complete all as specified and as directed.
S&F for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed.
S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F 18mm thick Rajshri Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge.
S&F 18mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge.
S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed by the Engr-in-Charge.
S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutterscomplete all as specified and as directed.
S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and as directed.
S&F in repair 18/19mm thick prelaminated particle board interior grade, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and bed room shutters or in any type complete all as specified and as directed.
S&F in repair continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electrogalvanised complete all as specified and as directed.
S & F 100mm aluminum Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws Complete all as specified and as directed.
Demolition of brick work or stone Masonary built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.
Cutting holes in brick walls in cement mortar for walls inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and directed.
M&L for PCC (1:2:4) Type B1 (using 20mm graded aggregate) in wall, boundary pillars and post or similar work for hold fsat in door and windows etc complete all as specified and directed.
M&L brick work with fly ash 'bricks (FASB) confirming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:4 complete all as specified and as directed
M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.
M&L Newly plastered surface and applying two coat of oil bound distemper and one coat of white putty on walls complete all as specified and directed.
M&L preparation of old/New decorated plastered or unplastered surfaces to match the existing surface of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds moss and efflorescent and applying one coat of white wash complete all as specified and as directed
M/S M S Constructions
M/s Ravi Traders
Ms Vinay constructions
M/S RAJ KUMAR SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .