Repair and maintenance of Public Health Services of Lake Sports Complex Sector 1, Chandigarh Ch to 2215 (N.P) NRB)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in DSR 6.4

Cement mortar 1:4 (1 cement : 4 coarse sand DSR 6.4.1

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: DSR 9.96

250x16 mm DSR 9.96.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, wit necessary screws etc. complete : DSR 9.97.

200x10 mm.DSR 9.97.3

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 9.100

150 mm DSR No.9.100.2

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coatof approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14

Profile B DSR 14.14.1

Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1

12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7

1:3 (1 cement: 3 fine sand) DSR 13.7.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead DSR 15.12

Of area 3 sq. metres and below DSR 15.12.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28

32 mm dia DSR 17.281.1

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall DSR 18.10

20 mm dia nominal bore DSR 18.10.2

25 mm dia nominal bore DSR 18.10.3

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17

25 mm nominal bore DSR 18.17.1

Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

15 mm nominal bore DSR 18.21.2.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

25 mm nominal bore DSR 18.46.3

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A

Providing and fixing of concealed stop cock Complete with internal part body make jaquar opal suitable for 15mm pipe line with protection cap with exposed parts complete in all respect IC. Jaquar Continental Model or equivalent model of approved make to the satisfaction of EIC

Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make

Providing and fixing of Table Top Wash Basin with CP waste complete in all respect Make Jaquar Model Fonte or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047KN or equivalent in the same price range or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model CON-059KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .

Providing and fixing of Long Body bib cock with wall flange, make Jaquar range Continental Model CON-107KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Central Hole Mixer with 450 mm long braided hoses, make Jaquar range Continental Model CON-167KNB or equivalent model of approved make to the satisfaction of EIC

Providing and fixing of wall mixer (wall mounted model) with telephonic shower arrargement only & Telephone shower crutch "Jaguar" make Continental collection complete as per CAT No.CON-217 KN or equivalent model of approved make to the satisfaction of EIC

Providing & fixing of Overhead Shower 180 mm Make Jaquar Model 1759 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing Shower Arm 450 mm long make Jaquar Model SHA-479L450 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent in the same price range or AOR Make Jaquar

Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 1-Meter-Long Easy Flex Tube in Chrome Finish & W all Hook Complete Make Jaquar Model ALD-585 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. waste complete in all respect

32mm dia for WHB

Providing and fixing of CP/SS Long Bend /short bend for OWC

Providing and fixing Hydro pneumatic pump of size 0.5 HP of approved make with pressure switch pressure gauge, accessories and making connection complete having discharge 2000 LPH at 6m head make Crompton or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing ISI marked water proof flush door shutters of pine frame sesoned and treated with seasoned pipe filler and 2.5mm gurjan core, fungus resistant, eco frindly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS:848: complete in all respect of approved make

Supplying hosting & fixing M.S sheet 10 gauge thick on R.S joists with the help of welding. The M.S sheet shall been painted with two coats of black paint etc.

Providing and fixing of M.S Girder of size 200 x 100mm for making platform for PVC tanks with 2 coats of paints after 1 coat of primer complete in all respects. Size .08x04''

Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm

Providing and fixing 1.5mm thick polycarbonate sheet to be fixed on the existing M.S. frame with self drilling machine screws complete in all respect to the entire satisfaction of Engineer-in-charge

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.MS ladder made of angle iron 50x50x6mm approx 12'6" length DSR 10.25.2

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade DSR 13.81

Old work (one or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88

Please Enable Macros to View BoQ information