Repair Maintenance of Internal Wiring including Flameproof Wiring Ceiling Fans Exhaust Fans at MO Goa and NAD and Repair Maintenance of Geysers Ceiling Fans and Exhaust Fans at NOFRA Area NOI NCS and LCAH Rajhans under GE Gomantak Vasco

Amount

Taking down carefully copper/aluminium point wiring any type (light, fan socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials at site and making good disturbed surfaces of walls floors etc.

M&L for one light point or fan point controlled by one switch with cables 1.5 Sqmm copper cable FRLS multistranded unsheathed drawn through & including casing and capping and 1.5 sqmm conductor cable for earth wire including making connection with common earth and earth dolly including pressed steel terminal al boxes concealed in wall with 3 mm thick plastic laminated sheet top cover fixed with brass screw for mounting switches sockets regulator etc all as per directed by Engr-in-Charge.

M&L for one light point controlled by one switch with cables 1.5 Sqmm copper cable FRLS multistranded unsheathed drawn through and including stove enamelled steel conduit on wall and 1.5 sqmm copper conductor cable for earth wire including flameproof ceiling rose and making connection with common earth and earth dolly and making good disturbed surface of walls and floors to match with existing surfaces all as specified and directed by Engr-in-Charge.

M&L for point wiring for 5 amp independent point with 1.5 sqmm copper wire & 1.5 sq mm copper wire as earth lead drawn through & including casing and capping of suitable size all as specified and directed by Engr-in-Charge.

M&L for point wiring for 15 amp independent point with 4 Sqmm copper wire & 4 Sqmm copper wire as earth lead drawn through & including casing and capping of suitable size all as specified and directed by Engr-in-Charge.

M&L for point wiring for 15 amp independant point with 4 Sqmm copper wire & 4 Sqmm copper wire as earth lead drawn through & including stove enamelled steel conduit on wall of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & fixing switch piano flush button single pole one way 5 Amps all as specified and directed.

Supply & fixing switch socket combination outlet 2 in 1 5 pin 5 Amps flush type all as specified and directed.

Supply & fixing switch socket combination 2 in 1, 6 pin 15 Amps flush type all as specified and directed.

Supply only modular switch 1 way 6A, 1 module, 230 volts all as specified.

Supply only modular switch 1 way 16A, 1 module, 230 volts all as specified.

Supply only modular socket combination outlet 6A-2/3 pin, 2 module all as specified.

Supply only modular socket combination outlet 6A/16A-2/3 pin, 2 module all as specified.

Supply & fixing ceiling rose, surface Bakelite 65x50 mm Two to three terminals all as specified and directed.

Supply & Fixing stepped type electronic fan regulator flush type including removal of old one.

Supply and fixing flame proof rotary type switch with termination box in LM6, Single pole 250 Volts, ON or OFF Element including flexible metal pipe with threaded ends to connect between rotary switches complete all as specified and directed. Make : Sudhir/CG/Baliga

Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 15A, 250V, 2P+earth interlocked Switch, Socket & plug complete. Make : Sudhir/CG/Baliga

Supply & Fix in repair MCB 6 to 32 Amps, SP, braking capacity 10KA, C series all as specified and directed.

Supply & Fix in repair MCB 20 Amps, SPN, braking capacity 10KA, C series all as specified and directed.

Supply & fix TPN MCB 40 Amps, 'C' series, 10KA, 230 Volts all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & fix TP MCB 40 Amps, 'C' series, 10KA, 230 Volts all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & fix in repair MCCB 415V, 3 phase 50 HZ, 4 pole, 100 Amps breaking capacity of 16 KA all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & fix sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volts all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & Fixing MCB protected socket of 20 Amps with plastic enclosure for surface mounting including plug top of 20 Amps complete with one single pole 20 Amps MCB including disconnecting and removal of old one. Make : Havells/Legrand/C&S/Anchor

Supply & Fixing sheet metal enclosure DB, 8 way, SPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete including dismantling of old one complete all as specified and directed.

Supply & fix sheet metal enclosure DB, 6 way, TPN, double door factory made powder coated including bus bar and earth link connector, fixed in wall complete including part of job all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & fix sheet metal enclosure for VTPN DB, 4 way, double door factory made powder coated including bus bar and earth link connector, fixed in wall/Panel with provision for 100 Amps MCCB as incomer complete including part of job all as directed by Engr-in-Charge. Make : L&T/Legrand/C&S

Supply & Fixing Submain wiring with 4 sqmm three runs (Phase, neutral and earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn through and including casing capping of suitable size including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.

Supply & Fixing Submain wiring with 6 sqmm five runs (Three phase, one neutral and one for earth) of single core multi stranded FRLS unsheathed PVC copper conductor cable 1100 Volts as per colour code drawn through and including casing capping of suitable size including all accessories as required and connecting to Existing main switch board/DB & testing on completion including dismantling old unserviceable submain wiring complete.

Supply & Fixing submain wiring with 3 Runs (Phase, Neutral and Earth) of 4 Sqmm, PVC insulated, unsheathed, single core, multi stranded, 1100 volts, FRLS copper conductor cable drawn in and including stove enamelled steel conduit on wall of suitable size with all accessories as required and connecting to existing main switch board/Distribution Board/Earth continuity and testing on completion all as directed by Engineer-in-Charge.

Supply and fixing FIAMMA II flameproof 2x20W LED Tubelight fixture with IP 65 protection etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.. Cat Part No EXTN1LT8-16/20 of CG or equivalent make : Sudhir.

Supply and fixing LED tube rod 20 Watts for flameproof tubelight fixture complete all as specified and directed by Engr-in-Charge.

Supply and fixing high beam revolving search light LED of capacity 200 Watts, IP66, high lumen LED >160lm/watt including Tripod stand of 1 meter height with focus range of 400 mtrs with all accessories internally pre-wired and including connecting up with twin core flexible copper conductor cable with suitable size complete all as specified and directed.

Taking down and servicing of ceiling fan 1200/1400 mm sweep at site and removing of old grease from bearing of ceiling fan and re-filling new grease including replacement of worn out nut bolt/ washer, rubber real bush, canopy and reassembling the fan complete and hanging on its original/ new position as directed by Engr-in-charge. Note: MS nut bolts with spilt pin, Ball bearing and Gun metal bush shall be measured and paid seperately.

Taking down and servicing / cleaning of exhaust fan 200 to 300mm sweep at site and removing of old grease from bearing of exhaust fan and re-filling new grease including replacement of worn out nut bolt, rubber real bush, gun metal ball bearing, capacitor, split pin etc and re-assembling the fan complete all as directed by Engr-in-Charge. Note: MS nut bolts with spilt pin, Ball bearing and Gun metal bush shall be measured and paid seperately.

Supply only MS Nut bolts with split pin as per sample and as directed by Engineer-in-Charge.

Supply only Ball bearing suitable size of ceiling fan and exhaust-fan of any type and size .Make : SKF/ Tata or equivalent

Supply only gun metal clamp with bush suitable for ceiling fan and exhaust fan any type and size including removing old one.

Taking down and opening the body cover of ceiling fan any type and make and cutting the existing worn out winding with out damaging the stator removing the coil insulation and putting new insulation of polyster paper, winding with super enameled copper wire of suitable gauge with correct number of turns of auxillary and main winding and varnishing and backing complete including soldering new lead of copper wire testing complete including transportation to work shop and back all as directed Note : - (a) Contractor have to make the arrangement for testing of Rewinded fan upto 24hrs at NOFRA Sub stn and in case of failure to above said testing a penalty of Rs 200/- per fan is deducted from contractors due and rewinding of same once again is bonded. (b) Fan should be return to MES yard after rewinding within 10 days from the date of issue otherwise a penalty of Rs 10/- per day per fan shall be deducted from contractor's dues.

(a) Ceiling fans 1200/1400 mm sweep

(b) Exhaust fan 230 to 400 mm sweep

(c) Flameproof exhaust fan 300 to 400mm sweep

(d) Wall Mounted fan 400mm sweep

Supply & Fixing in repair fan capacitor 2.5 mfd 240 V AC supply. Make : Havells/Siemens/Epcos

Supply & fixing BLDC (Brushless DC motor) ceiling fan 1200mm sweep, 5 star rated (ISI Marked), 230 volts includung connection rod as per existing size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing wall mount fan 400mm sweep, 5 star rated (ISI marked) 230 volts plastic made including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Supply & fixing wall mount fan 400mm sweep, 5 star rated (ISI marked) 230 volts metal made including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Supply & fixing exhaust fan 200 mm sweep plastic body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 300 mm sweep plastic body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 300mm sweep, heavy duty, metal body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Taking down carefully storage type water heater (Geyser) of 25/50 litres capactity after disconnecting inlet/outlet/vent pipes, electric/earth connections etc cleaning of the body inlet/outlet/vent pipes stop cocks non return valves etc leakage arresting of inner copper/steel tank by welding/brazing etc reassembling the geyser by replacing gaskets worn out nuts washers etc refixing the same in position by replacing mounting bolts and nuts reconnecting all inlet/outlet/vent pipes electric/earth connections and carrying out testing for proper functioning all as directed by Engineer-in-Charge. Note : Parts will be measured and paid seperately.

Supply only heating element of 1.5 KW/2.0 KW capacity of storage type water heater of compatible type including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements all as directed by Engineer-in-Charge.

Supply only thermostat suitable for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge.

Supply only cut out for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge.

Supply only non return valve (gun metal) of size 16/20mm including removal of old ones all as specified and directed by Engr-in-Charge.

Supply and fix CPVC SDR 11 fittings union of size 16 mm dia bore including taking down old u/s GI union

Supply and fixing CPVC SDR 11 fittings union of size 20mm dia bore including taking down old u/s GI union

Supply and fixing of CPVC pipes 16mm bore SDR 11 and plain CPVC SDR 11 fitting on wall/ ceiling or laying on floors complete all as specified including taking out old GI pipe.

Supply and fixing of CPVC pipes 20mm bore SDR 11 and plain CPVC SDR 11 fitting on wall/ ceiling or laying on floors complete all as specified including taking out old GI pipe.

Supply & installed storage type water heater (Geyser) capacity 25 Ltrs five star rating GMV type prefixing and grouting work for mounting nuts, bolts and washer etc in wall and reconnecting all inlet/outlet/vent pipees electrical/earthing connections and carrying out testing for proper functioning including dismantling of old geyser and deposited in MES store yard all as per directed and specified by Engr-in-charge. Make : Havells/Bajaj/Venus

Supply only stainless steel flexible pipe connection suitable size with stainless steel coupling nut and PVC washers on both ends complete for cold/hot water inlet/outlet lines for geyser.

Supply only indicator lamp assembly complete for water heater (geyser) suitable to work on AC 230 V supply and to match the existing size any type including disconnecting and removal of old ones.

Preparation of old painted surface of 50 liters storage type water heater and applying two coats of white synthetic enamel paint of approved make as directed.

Preparation of old painted surface of 25 liters storage type water heater and applying two coats of white synthetic enamel paint of approved make as directed.

Supply & Fixing MCB Single pole 20 Amps, 230 Volts, 10 kA braking capacity, 'C' Curve complete all as specified and directed.

Supply and fixing plug top of 16 Amps capacity complete all as directed by Engr-in-Charge. Make : Havells/Legrand/Anchor

Supply and fixing metal clad 3 pin plug top and socket of 20 Amps capacity any make including all electrical connections with suitable size cable/wire etc complete all as directed by Engr-in-Charge.

Material & Labour for Preparation of old painted surface of ceiling fan and applying one coat of synthetic enamel paint with spraying paint on machine including making MES number on body of the fan including taking down, refixing, connecting and testing complete all as specified & directed by Engr-in- charge.

Supply & Fixing step type modular electronic fan regulator flush type 2 module for 48" / 56" sweep ceiling fan including taking down existing regulator

Supply & Fixing in repair fan capacitor 1 mfd 240 V AC supply.

Supply & fixing ceiling fan 1200mm sweep, (ISI Marked), 230 volts includung connection rod as per existing size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 225/230mm sweep, heavy duty, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

SHIVANI ENTERPRISES

OM SAI ELECTRICALS

M/S DUBAL CONSTRUCTION

OM SAI ASSOCIATES

Heat Control

JINTECH

BHAVIN INFRA

Susheel Enterprises

Star Freeze Service