Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹5.5 L
Closing Date
29 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT.GEN.
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(available in GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Calculation of required minimum average annual contractual turnover- V = Rs. 27697603, N= 9 months = 0.75 year, V/N= 27697603/0.75 = Rs. 36930137.33, V is less than V/N, Hence, required minimum average annual contractual turnover = Rs. 27697603
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: (1) Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Defination of Similar Work :- Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT / LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc.
13 conditions · 7 needing a document upload
The registration of contractors working under Railway departments with ESIC is mandatory (if applicable as per current Law / Act)
In case a tenderer is participating as Sole Proprietor in a tender, it is mandatory for him to submit an undertaking on suitable stamp paper to this effect clearly mentioning PAN number also along with tender document at the time of submission of tender.
The tenderer may submit scanned copy of partnership deed if applicable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor shall ensure all precautions during digging work close to Rly signaling, telecom electrical cables etc. Penalties to be imposed for damages to any cable as per Railway board letter no. 2021/Tele/5(2)/3- Part(1)/(3425647) dtd 12.06.2023
BSL (GS) - Augmentation, replacement & modification to increase reliability of Electrical Power Supply & Distribution System of General Services.
BSL-L-W-T-34-2026
BSL-L-W-T-34-2026
Open
Works - General
9 Months
Jalgaon, Maharashtra
₹0
₹5.5 L
29 May 2026
4 May 2026
15 May 2026
77 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,76,97,603 | ||
| for details. | Item Breakup | — | — | ||
| Supply, erection, testing and commissioninig of 11 kV HT outdoor heat shrinkable cable jointing/ terminating Kit suitable for 3 core 70/95/120/185 Sq.mm Aluminium armoured XLPE cable. | — | — | — | 4,94,798 | |
| for details. | Item Breakup | — | — | ||
| Supply of HT XLPE 11 KV grade cable size 3x70 sq mm armoured aluminium conductor cable | — | — | — | 2,22,300 | |
| for details. | Item Breakup | — | — | ||
| Supply of 11kV 3 core 95 sqmm HT Aluminium armoured cable conforming to IS: 7098-Part 2 :2011 | — | — | — | 20,40,000 | |
| for details. | Item Breakup | — | — | ||
| Supply of 11kV 3 core 120 sqmm HT Aluminium armoured cable conforming to IS: 7098-Part 2 :2011 | — | — | — | 33,72,500 | |
| for details. | Item Breakup | — | — | ||
| Supply, erection, testing & commissioning of LT Outdoor type panel with double door powder coated with locking arrangements as per IEC 61439 consisting of 2 Nos x 630 4P ACB as I/C & 1 Nos x 630 A 4P Bus coupler ACB, 8 Nos x 250 A, 4 Nos x 400 A for O/G with 10" HMI, ELR with CBCT for each MCCB, Power quality analyser, DLMS Complaince 3 Ph KWH meter, 14 Nos x indicating lamp set (RYB), copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) | — | — | — | 12,37,256 | |
| for details. | Item Breakup | — | — | ||
| Supply, erection, testing & commissioning of LT Outdoor type LT panel with as per IEC 61439 double door powder coated withlocking arrangements consisting of 2 Nos X630 4P ACB as I/C & 1 Nos x 630 A 4P Bus coupler ACB, 1 Nos x 400 A 4P On load Changeover , 4 Nos x 250 A, 2 Nos x 200 A 4P MCCB, 4 Nos x 125 A 4P MCCB, 4 Nos x 63 A 4P MCCB as O/G with 10" HMI, ELR with CBCT for each MCCB Power quality Analyser, DLMS Complaince 3 Ph KWH meter, 16 Nos x Indiacating lamp set (RYB), copper busbar, & other assocciate aceesories. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) | — | — | — | 11,73,471 | |
| for details. | Item Breakup | — | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 70 to 120 sq mm., with necessary material as per specification | — | — | — | 1,33,400 | |
| for details. | Item Breakup | — | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 150 to 185 sq mm., with necessary material as per specification | — | — | — | 1,67,500 | |
| for details. | Item Breakup | — | — | ||
| Providing & erecting epoxy outdoor / indoor end termination kit for LT XLPE armoured cable 240 to 300 sq mm., with necessary material as per specification | — | — | — | 82,340 | |
| for details. | Item Breakup | — | — | ||
| Supply of LT XLPE Armoured 4 Core 50 Sq mm Aluminium cable as per relevant IS. | — | — | — | 2,43,000 | |
| for details. | Item Breakup | — | — | ||
| Supply of 4 Core 70 sqmm armoured LT XLPE Cable. | — | — | — | 1,86,000 | |
| for details. | Item Breakup | — | — | ||
| Supply of 4 core 120 sqmm armoured LT XLPE cable ISI mark. | — | — | — | 3,00,300 | |
| for details. | Item Breakup | — | — | ||
| Supply of 4 core 185 sqmm armoured XLPE Cable. | — | — | — | 5,12,000 | |
| for details. | Item Breakup | — | — | ||
| Supply of 4 core 300 sqmm armoured LT XLPE cable ISI mark. | — | — | — | 3,32,400 | |
| for details. | Item Breakup | — | — | ||
| Supply of 4 core 400 sqmm underground armoured AL cable. | — | — | — | 3,87,300 | |
| for details. | Item Breakup | — | — | ||
| Trenching & refilling of LT/HT/ Various sizes of PVC / XLPE cables- Along the Road (Size - 900mm x 300mm) | — | — | — | 10,39,500 | |
| for details. | Item Breakup | — | — | ||
| Digging of cable trench 300/450 mm x 1000 mm in RCC/PCC/hard soil & refilling as per specification and requirement at the site. | — | — | — | 3,28,000 | |
| for details. | Item Breakup | — | — | ||
| Transportation, Laying, Installation, terminating, testing and commissioning of LT/HT cable of sizes 10 sqmm to 300 sqmm in existing trench, pipe or on structure. | — | — | — | 1,62,500 | |
| for details. | Item Breakup | — | — | ||
| Transportation,Erection,testing and commissioning of cables other than trench i.e.Wall/Truss including clamp, GI wire and hardware | — | — | — | 65,000 | |
| for details. | Item Breakup | — | — | ||
| Supply & laying of GI pipe Class B, ISI marked under road /Clamping with erecting pole or wall as per techincal specification & drawing for passing cable. | — | — | — | 18,000 | |
| for details. | Item Breakup | — | — | ||
| Supply,installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995. | — | — | — | 66,750 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of RCC half round pipe 150 mm ID & 1 mtr length. | — | — | — | 3,14,200 | |
| for details. | Item Breakup | — | — | ||
| Supply and laying of RCC Hume Pipe of size 6"(150mm) dia 2 mtr. Length. | — | — | — | 22,374 | |
| for details. | Item Breakup | — | — | ||
| Supply, erection of RCC Type cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. | — | — | — | 64,870 | |
| for details. | Item Breakup | — | — | ||
| Supply & Erection of RCC Warning Cover and refilling the cable trench in an approved manner. | — | — | — | 41,990 | |
| for details. | Item Breakup | — | — | ||
| SETC of Replacement of Indoor type LT panel as per IEC 61439 with powder coated with locking arrangement consisting of 3 Nos x 800 A 4P ACB as I/C and 1 Nos x 800 A 4P Bus Coupler, 1 Nos x 800 A 4P onload changeover Switch, 5 Nox 630 A 4P MCCB, 4 Nos x 400 A MCCB, 4 Nos x 250 A 4P MCCB, 3 Nos x 125 A 4P MCCB, 4 Nos x 63 A 4P RCBO as O/G with 10" HMI, ELR with CBCT for each MCCB, Power qaulity analyzer, 5 Nos x DLMS Complaince 3 Ph KWH meter, 14 Nos x Multifunctionmeter, copper bus bar, 23 Nos x Indiacating lamp set (RYB), and other associate accessories complete. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) | — | — | — | 20,42,922 | |
| for details. | Item Breakup | — | — | ||
| SETC of Replacement of Outdoor type LT panel as per IEC 61439 with double door powder coated with locking arrangement consisting of 2 Nos x 800 A 4P ACB as I/C and 1 Nos x 800 A 4P Bus Coupler, 4 Nos x 400 A MCCB, 4 Nos x 250 A 4P MCCB, 4 Nos x 125 A 4P MCCB, 4 Nos x 63 A 4P RCBO as O/G with 10" HMI, ELR with CBCT for each MCCB, Power qaulity analyzer, 2 Nos x DLMS Complaince 3 Ph KWH meter, 14 Nos x Multifunctionmeter, copper bus bar, indiacation lamp, and other associate accessories complete. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) | — | — | — | 14,55,555 | |
| for details. | Item Breakup | — | — | ||
| SETC of Replacement of Indoor type LT panel as per IEC 61439 with powder coated with locking arrangement consisting of 2 Nos x 630 A 4P MCCB as I/C and 1 Nos x 630 A 4P Bus Coupler, 2 Nos x 400 A MCCB, 4 Nos x 250 A 4P MCCB, 6 Nos x 125 A 4P MCCB, 4 Nos x 63 A 4P MCCB, 24 Nos x 32 A DP MCB as O/G with 10" HMI, ELR with CBCT for each MCCB, Power qaulity analyzer, 08 Nos x 70 % - 30% automatic lighting control circuit, 2 Nos x KWH meter, 16 Nos x Multifunctionmeter, copper bus bar, 18 Nos x Indiacating lamp set (RYB), and other associate accessories complete. All MCCB are Microprocessor based (completely wired with suitable communication cable to fetch data from each compartment functional Unit (ACB/MCCB/SFU etc) / Multifunction Meter) | — | — | — | 12,45,525 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection, testing, and commissioning of 1 MVA, 11KV/433V, 3 Phase, 50Hz, Oil Immersed, ONAN, Outdoor Type, Vector group Dyn11, Copper Wound Distribution Transformer losses as per IS : 1180 EEL-2. | — | — | — | 45,19,400 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection, testing, and commissioning of 250KVA, 11KV/433V, 3 Phase, 50Hz, Oil Immersed, ONAN, Outdoor Type, Vector group Dyn11, Copper Wound Distribution Transformer losses as per IS : 1180 EEL-2. | — | — | — | 9,92,970 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection, testing, and commissioning of 500KVA, 11KV/433V, 3 Phase, 50Hz, Oil Immersed, ONAN, Outdoor Type, Vector group Dyn11, Copper Wound Distribution Transformer losses as per IS : 1180 EEL-2. | — | — | — | 16,19,904 | |
| for details. | Item Breakup | — | — | ||
| Supply, Erection, testing, and commissioning of 500KVA, 33KV/433V, 3 Phase, 50Hz, Oil Immersed, ONAN, Outdoor Type, Vector group Dyn11, Copper Wound Distribution Transformer losses as per IS : 1180 EEL-2. | — | — | — | 17,32,830 | |
| for details. | Item Breakup | — | — | ||
| Supply, erection, testing & commissioning of maintenance free earth as per RDSO specification no. RDSO/PE/SPEC/ PS/0109-008(REV '0') with improved earthing enhancing compound and exothermic welding (5 years warranty) | — | — | — | 9,03,588 | |
| for details. | Item Breakup | — | — | ||
| Supply, fabrication, fixing and erection of MS Work of miscellaneous size and for cable tray etc. including painting complete. | — | — | — | 15,300 | |
| for details. | Item Breakup | — | — | ||
| Supply, Fabrication & fixing of 40mm X 6mm MS flat for bonding including painting & hole drilling in rail/fencing guards. (for sub station) | — | — | — | 35,360 | |
| for details. | Item Breakup | — | — | ||
| Fabrication, supply and erection of fencing upright ISMC 100X2.95 M Height complete | — | — | — | 74,200 | |
| for details. | Item Breakup | — | — | ||
| Fabrication,supply and erection of fencing panel complete. | — | — | — | 24,100 | |
| for details. | Item Breakup | — | — | ||
| Fabrication,supply and erection of gate assembly for fencing complete. | — | — | — | 28,200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022dt.27.04.2022.pdf GCC Apr 2022
ATTACHMENT
ACS1to6ofGCC.pdf
ATTACHMENT
14_D_6_2024.pdf
ATTACHMENT
14d_5_2023.pdf
ATTACHMENT
DOC-20251225-WA0005.2.pdf
ATTACHMENT
BIS1.pdf
ATTACHMENT
BIS2.pdf
ATTACHMENT
TenderdocumentNo342026.pdf Tender document
ATTACHMENT
ACS7to10ofGCC.pdf
ATTACHMENT
ACS11toGCC.pdf
ATTACHMENT
GCCApril2022dt.27.04.2022.pdf
ATTACHMENT
TenderdocumentNo342026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .