CA NO GE/AFJ-04/2021-22 REPAIR/REPLACEMENT OF INTERNAL WIRING, ELECTRICAL FITTING AND FIXTURES INCL DAILY MAINT OF ELECTRICAL COMPLAINTS AT OTM ACCN AREA OF AIR FORCE STATION JAMMU UNDER GE(AF) JAMMU

Amount

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.2 above but for one multipin 5 amps socket outlet on same board.

All as per item No. 2.00 above but for one multipin 5 amps socket outlet on independent board

All as per item No. 2.00 above but with 2.5 sqmm cable and 1.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl stove enamelled steel conduit with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.6 above but for one multipin 5 amps socket outlet on independent board

All as per item No . 6 above but with 2.5 sqmm cable and 1.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

Supply and fixing LED 2 x18 watt flameproof type FLP-WP made of aluminium alloy LM6 with electronic ballst, bipin holders, connector block, etc complete with all accessories prewired and including cooneecting up with twin core twisted flexible copper conductor cable of 1.5 sqmm, single core all as directed. Cat No : EXTN2LT8-16/20 of Crompton Greaves

Supply and fixing switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250 V, 2p+earth complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair switch piano button flush type, single pole one way 5 amps incl taking down old unserviceable one. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixng 5 pin switch socket combination 2 in 1, 5 amps flush type complete all as specified and as directed by Enggineer-in-Charge.

Supply and fixing switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and as directted by Engineer-in-Charge.

Supply and fixing ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge

M&L for sub main wiring with two run of 6.00 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and of 25 mm dia & 4.00 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Make of wire-- Finolex/Havells/Plaza.

M&L for sub main wiring with two run of 4.00 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and of 25 mm dia & 2.50 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Make of wire-- Finolex/Havells/Plaza.

Supply and fixing MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 12 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar. Make-Legrand Cat pt No 5077 20 or equivalent of make L&T / Merlin Gerin multi-9 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface incl taking down the old DBs incl taking down old unserviceable one. all as required at site or directed by Engr-in-Charge. (Note: MCB's and MCCB will be measured and paid seperately under relevent items)

Supply and fixing MCCB TPN 125 Amps ,415 Volts complete incl taking down old unserviceable one complete all as specified and as directed by Enggineer-in-Charge.

Supply & fixing in repair of LED Traffic Light, size 255 mm dia with 108 No LED complete fitting colour Red/Green as per site requirement including necessary connection and testing complete all as specfieied and directed by Engr-in-Charge.Make :-ELEX LED

Hanging only ceiling fans in repairs any size, any make, and necessary connection as directed by Engineer-In-Charge.

Attending complaints for checking of existing electrical points wiring upto size 6 sqmm in any Buildings of OTM Accn Area for continuity, no light complaints, including carrying out minor repairs etc as required to make the item functional and replacing burnt wire ends, small pieces of wire, thimbles, tightning of loose connections etc all as specified. Note- Contractor has to deploy Qualified Electrician and Helper with all necessary tools on all days to the complaint cell and complaints will be attended on the same day itself. Recovery for non attending complaints will be three times rate quoted by the Contractor (Recovery rate will be drieved from the number of complaints on daily basis as mentioned here-in-after).

Note : (a) Contractor shall provide his Electician and Helper for OTM ACCN AREA along with necesary tools and hardwares to rectify defects from 0830 to 1700 Hrs on all days including Holidays & Sundays. b) One complete month shall be considered as Each job including Holiday and Sunday. c) The contractor shall depute ITI holder electrician or a retired person having sufficient experience in the trade & semi skilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag. (d) Labour for fixing of new fittings/fixtures including taking down old unserviceable fittings/fixtures for items which have been considered in this BOQ here-in-after as "Supply only" is deemed to be included in overall rates quoted for this item by the tenderer

Supply only switch piano button flush type, single pole one way 5 amps complete all as specified and as directed by Engineer-in-Charge

Supply only 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type

Supply only 5 pin switch socket combination 2 in 1, 5 amps flush type

Supply only switch socket combination 5 in 1, 5 and 15 Amp flush type controlled by one switch

Supply only switch bell push piano flush button single pole one way 5 amps complete all as specified and as directed by Engineer-in-Charge

Supply only piano switch two way flush button 5 amps complete all as specified and as directed by Engineer-in-Charge

Supply only flush type fan regulator 230V, electronic rotary stepped increase complete all as specified and as directed by Engineer-in-Charge

Supply only Call bell ding dong AC, 23 Volts, single pole type complete all as specified and as directed by Engineer-in-Charge

Supply only lamp holder insulated body with back plate for batten fitting with LED lamp 08 watt complete all as specified and directed by Engineer-in-Charge.

Supply only Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

Supply only Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.

Supply only Socket outlet flush modular (piano) type 5 pin 6 Amps with suitable plate and cover complete all as specified and directed.

Supply only Socket outlet flush universal modular (piano) type 6 pin 6/16 Amps with suitable plate and cover complete all as specified and directed.

Supply only Electronic Modular Fan regulator step type not less than 100/120 watt with suitable plate and cover complete all as specified and directed.

Supply only 2'x2' LED Panel 36/40 watt, Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, powder coated white CRCA full glow LED light fitting including 3 core flexible wire from ceiling rose to fitting etc. all as specified and directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department. Make: VENUSNEOHE2X2PLR36WLED8XXS of Havells or equal approved in C&S/Syska

Supply only LED tube light fitting 18/20 watt wall mounted LED batten with polycarbonate housing & integrated electronic driver as per CAT PART No LUMILINEBS20WLED865SPCWH of Havells or equivalent of Bajaj/Crompton/Wipro complete all as specified and as directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department.

Supply only LED tube light fitting 18/20 watt wall mounted LED batten with polycarbonate housing & integrated electronic driver as per CAT PART No WARM WHITE of Havells or equivalent of Bajaj/Crompton/Wipro complete all as specified and as directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department.

Supply only LED tube light fitting 9/10 watt wall mounted LED batten With polycarbonate housing & integrated electronic driver as per CAT PART No LUMILINEBS9WLED830SPCWH of Havells or equivalent of Bajaj/Crompton/Wipro complete all as specified and as directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department.

Supply only MCB SP 5 to 32 Amps, 230 V A/C complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply only MCB SPN 32/40 Amps, 230 V,AC complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 09 to 4086 17 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply only MCB SPN 63 Amps, 230 V,AC complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply only MCB TPN 63 Amps 415 V complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 61 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply only fan capacitor 2.5 mfd complete all as specified and as directed by Engineer-in-Charge.

M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

Supply only Batten for LED Tube rod suitable for T8 Lamp Cat No : REGALBATTENT 8UPTO1X22WSSBSWH of Havells complete all as specified and as directed by Engineer-in-Charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area

M/S VIDYA ENTERPRISES

Harsh Electricals

M/S GRD ENGINEERS

M/S RAJ ENGINEERS

M/S MANJIT SINGH AND SONS

M/S GEE EMM MIR