Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC GANDHI CHOWK MANIPURA JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹33.1 L+₹2.1 L (6.71%)Rejected-Finance 602 TECHNOLOGY APARTMENTS 24 1 P EXTENSION DELHI 110092 | DELHI | DELHI | DELHI | 110092 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹34.0 L+₹3.0 L (9.54%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹34.6 L+₹3.6 L (11.5%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹36.4 L+₹5.4 L (17.3%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jaisalmer
GE(AF) Jaisalmer
IMPROVEMENT TO CERTAIN SMQs AND PROVN OF STEEL LADDER FOR MD ACCN AND OTM ACCN IN DOMASTIC AREA AT AF STN JAISALMER
2023_MES_617925_1
8961/GE/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Jaisalmer
As Per Tender Documents
7 documents required · 7 mandatory
₹500
GE (AF) Jaisalmer
₹78,000
Yes
28 Oct 2023
8 Sept 2023
10 Oct 2023
8 Sept 2023
7 Oct 2023
23 Sept 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
Factory made 35mm thick second class hard wood plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class hard wood rail and styles, fixed to chowkat, complete all as specified and directed.
Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I complete all as specified and directed.
PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as bed block, bend fixing hold fast ,filling of door frame etc including necessary use and waste of formwork complete all as specified and as directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
Factory made steel windows with side hung shutters including projecting type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of red oxide Zinc-Chromate primer including taking out old existing steel window frame complete all as specified and as directed.
all as per SI No 9.00 here-in-before but without glazing bars complete all as specified and as directed .
Powder coated aluminium (minimum thickness of powder coating 50 micron) frame /shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed .
Expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as per requirement and directed by Engg-in - Charge.
3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to steel window in square exc 0.5 sqm in each pane complete all as specified and as directed.
3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to steel window in square exc 0.5 sqm in each pane incl hacking out old broken glass (any thickness,size) from wooden/steel frame complete all as specified and as directed.
5 mm thick Figured glass and fixed to aluminium Ventilation in square exc 0.5 sqm in each pane complete all as specified and as directed.
Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.
Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc fixed as in repair complete all as specified and as directed.
100mm Butt hinges extruded aluminium alloy with stainless steel hinge pin type complete all as specified and directed.
200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
Mild steel helical door spring 300 mm long including roller and roller plate complete all as specified and as directed .
Aluminium handle 150mm long , fabricated type anodized complete all as specified and directed.
Mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
Stainless steel curtain rod 25mm dia with side bracket fixed with stainless steel matching pair of brackets fixed at both ends with screws on walls/beam fixed as in repair complete all as specified and directed.
Non skid glazed ceramic tile coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed.
Non skid glazed ceramic tile coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed.
Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm thick as in dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed
Machine cut Kota stone slab 18- 20mm thick, as in floor, riser of step, etc. laid over and including rendering of 15mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabcomplete all as specified and directed.
Machine cut Kota stone slab 18- 20mm thick, as skirting, dado and pillar etc. laid over and including rendering of 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabcomplete all as specified and directed.
18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to accommodate counter basin etc including dismantling of existing stone slab bedding complete all as specified and as directed.
Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and as directed.
Reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, roofs, landings, balconies, canopies, chajjas and the like including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debries from site complete all as specified and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Use and waste of Form work to edges of concrete flat floor and roof not exc 200 mm wide to rough finished surfaces of concrete complete all as specified and as directed .
Re fixing 20 mm bore old steel tubing and connections, in new or old position with new fitting (walls, ceiling, floors etc) including taking up or down old unserviceable existing steel water tubing and connections including cleaning for re fixing complete all as specified and as directed
Re fixing 25 mm bore old steel tubing and connections, in new or old position with new fitting (walls, ceiling, floors etc) including taking up or down old unserviceable existing steel water tubing and connections including cleaning for re fixing complete all as specified and as directed.
Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.
Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.
Galvanized steel water tubing medium grade of 25mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.
Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.
20mm dia Gun metal globe or gate valve, with iron wheel head, screwed both ends, ISI marked fixed as in repair complete all as specified and directed.
25mm dia Gun metal globe or gate valve, with iron wheel head, screwed both ends, ISI marked fixed as in repair complete all as specified and directed.
Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layer (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position including 20mm dia PVC float valve & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. fixed with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore including dismantling of existing tank complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
15mm thick plaster in cement mortar (1:6) on block masonry/stone masonary surfaces or other than of fair faces of brick or concrete surfaces, finished even and fair complete. complete all as specified and directed.
Rendering 15 mm thick plaster in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on fair faces of brick/concrete or stone wall surfaces complete all as specified and as directed Note :- Supply only of integral liquid water proofing compound shall be measured and paid for separately under appropriate item of this schedule).
5mm thick ceiling plaster in cement mortar (1:3) on uneven faces of concrete surfaces of ceiling soffits of chajjas/ drop & roof projectiom facia etc , complete all as specified and directed.
Demolition of brick work or stone/boulder/PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. and including ashlar facings, dressed stone work and precast concrete articles like paver blocks laid dry manhole cover and removing rubbish off the premises etc. complete all as specified and directed.
Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) , etc. complete all as specified and directed.
Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses in walls etc
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.
Dismantling of existing water proofing treatment,concrete works of any location up to existing RCC slab by chiesling,drilling,scraping etc in any layers complete all as specified and directed.
10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface including Note - Water proofing compound shall be measured and paid separately.
Supply only Liquid water proofing compound STP No-1 Dr. Fixit or other equivalent make complete all as specified and directed.
Water proofing roof treatment, consists of a five layered atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including Bituminious primer @ 0.3 ltr per sqm confirming to IS 3384-1986 on roof surfaces piror laying APP and a coat of bituminous aluminium primer @ 100 gm/sqm on top, including sealing all joints by thermo fusion, complete all as per manufacturer's instructions.
Plan cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in padding ,roof kerb or mud step or similar work etc including weathering, slightly rounded or chamfered angles and throating, necessary formwork as required including demolition of existing complete all as specified and directed.
Preparing new plaster surfaces and applying a coat of readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of wall complete all as specified and directed.
Complete removal of existing treatment, filling up undulation surfaces and applying a coat of readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of wall complete all as specified and directed.
Preparing new plaster surfaces and applying a coat of readymixed wall putty on entire surface of ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of ceiling complete all as specified and directed.
Complete removal of existing treatment, filling up undulation surfaces and applying a coat of readymixed wall putty on entire surface of ceiling etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over a one coat of primer after smoothening of surfaces complete of ceiling complete all as specified and directed.
Preparation of old plastered wall surfaces and applying one coat of cement based paint (tinted) as approved complete all as specified and directed.
Preparation of newly plastered wall surfaces and applying two coats of cement based paint (tinted) over a coat of alkali resistant primer as approved complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling, soffit of chajjas /drop and roof projection facia complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed.
Preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
Preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed.
Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450 mm dia to 600 mm long) (b) M&L for PCC 1:1:5:3 type B-O( using 12.5 mm graded stone aggregate ) 50 mm thick laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/SIKA/PIDILITE/STP.Khurra 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrallywhile laying PCC. fixing of spout shall be done with same PCC as in this item. (c) M&L 18 mm thick cement plaster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA /PIDILITE/ FOSROC/STP.
Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling old unserviceable complete all as specified and directed.
Vitreous china wash down water closet pan (Pedestal pattern), white coloured, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.
Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with including dismantling and taking down old unserviceable complete all as specified and directed.
10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe and fixed as in repair complete all as specified and directed.
Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm with bowl size 410 mm x 330mm x 160mm, with and including 40mm bore waste pipe fixed as in repair complete all as specified and directed.
Stainless steel kitchen plate rack 1.00mm thick sheet of size not less than 900x600 mm with three rack fixed with stainless steel screw on wall properly fixed as in repair complete all as specified & directed
15mm bore chromium plated fancy type bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as specified and directed.
15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete all as specified and directed. Make JAQUAR Model No CON- 169KNB) or equivalent approved make.
15mm bore brass chromium plated fancy type angle cock/stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.
15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.
PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and fixed as in repair complete all as specified and directed.
Chromium plated (Health Faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook and anodised hanging device complete all as specified and directed. (Make : JAQUAR,Model No ALD-CHR-585) or equivalent approved make
Chromium plated shower rose size 120 mm dia and round shape incl fixing to steel pipe or union fixed as in repair complete all as specified and directed.
Chromium plated shower CP arms swivel joint, including fixing to steel pipe and fixed as in repair complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing chromium plated bracket, guard and railing 55/56cm long fixed as in repair complete all as specified and directed.
Tubular towel rail, stainless steel, 20mm dia, 60cm long fixed with & incl chromium plated brass screws and wooden / plastic cleat fixed as in repair complete all as specified and directed.
Cutting hole into or through brick/stone walls built in cement mortar for inserting hold fast superficial area exc 150 sq cm and n.exc 400 sq cm and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick complete all as specified and as directed
PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement for trap fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bend any radius with access door provided fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) vent cowl fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.
75mm bore PVC (SWR) bend any radius radius with access door provided fixed as in repair complete all as specified and directed.
Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified & as directed.
Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 110mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified & as directed.
Salt glazed stone ware gully trap size 150x150mm, square,type 'P' including setting and jointing to drains with cement mortar 1:1 and CI grating including demolition of existing traps complete all as specified and directed
Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers,cabinet, pelmet boxes and similar work fixed as in repair complete all as specified and directed.
Hasp and staple 100 mm size, ISI marked , safety type of aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed
Continuous piano hinges mild steel bright finish or electrogalvanised of 30mm width of flap complete all as specified and as directed
Stainless steel Magnet door catcher of superrior quality all as specified and directed.
125 mm size extruded brass handles,fabricated type polished.e, ISI marked complete all as specified and as directed
PVC Frame for (kitchen cabinet) of solid PVC foam of size 45mmx20mm of any colour complete all as specified and directed
PVC shelves & sides made out of solid PVC form profile 20 mm thick made of three layer extruded sheet with top and bottom UPVC layer having density of 1450 gm/cc and middle layer form sheet having density 0.55 gm/cc with matching 0.5 mm thick PVC/melamine edge banding tape in shade as approved . the top layer of shelf &side shall be coverd with 1 mm thick laminated sheet.PVC sheet complete all as specified and as directed
PVC Shutter made out of solid PVC form profile 18 mm thick homogeneous fine cellular structure panelled having styles and rails of size 45 mm x 20 mm joints mitred at corners. The panel shall be made of 3 mm thick HPL sheet cover with moulding of size 35 mm 15 mm in any colour both side including stainless steel modular hinges,magnet catchers, handles & Knobs etc complete all as specified and as directed
Stainless steel basket of different pattern like plate rack,bottle rack etc,fixed with and including adjustable sliding steel channels to kitchen cabin,pattern and no of steel racks will be specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for balcony railing,etc complete all as specified & as directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe-410W Grade E-165 complete all as specified and directed.
75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection and flooring and provided joints 10mm wide & full depth at 3m distance and every change of direction filled with sand and bituminious mix 1:3 including demolition of existing concrete and removal debris outside MD land complete all as specified and directed.
Plain cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in foundation filling complete all as specified and as directed
100 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of flooring/hard standing finished even and fair surfaces including demolition of existing concrete complete complete all as specified and as directed
40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in flooring, finished even and smooth with using extra cement including demolition of existing concrete complete all as specified and directed.
Jodhpur stone roof slab, self faced 7.50cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement and sand mortar 1:3 including demolition / removal of existing stone slabs any thickness complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for laying of cables, pipes, erection of poles, structs/stays etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.
Plan cement concrete (1:2:4) type C-1 (using 20mm graded stone aggregate) as in coping of masonry wall, benching of manholes etc including weathering, slightly rounded or chamfered angles and throating, necessary formwork as required including demolition of existing concrete complete all as specified and directed..
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.
150mm bore SGSW drain pipe , laid and jointed with collars, laid and jointed on concrete bed complete including testing, after demolition and breaking up existing drain pipes set in cement mortar including bedding haunching complete all as specified & as directed.
P:C:C 1:4:8 type D-2 using 40 mm graded stone aggregates as in beds of SGSW pipe 150 mm bore, laid to required slope including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and as directed Note: - (i) Thickness of concrete bed below the barrel of pipe shall be 10cm. (ii) Pipe shall be measured & paid for separately. (iii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets/collars) plus 30cm. (iv) The rate includes for all necessary shuttering and support to concrete and for laying beds to falls.
SFRC manhole covers with rectangular frame of size 44"x26" thickness 4.75" and cover size 40"x22" thickness 2.75" with 36"x18" clear opening MD-10 fixed including dismentling of old manhole cover slab complete all as specified and directed.
Plain cement concrete 1:3:6 type C 2 (using 40 mm graded stone aggregate) as in foundation filling for ladder complete all as specified and as directed
Cutting the roots of trees from the brick/stone wall made in cement morter exc half and not exc one brick thick wall and making good the disturbed surfaces to arrest further growth to the roots with the cement sand mortar 1:3 or PCC 1:2:4 complete complete all as specified and as directed
Taking down carefully existing unserviceable/perished conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/ conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators etc and making good the disturbed surfaces of wall/ceiling complete all as specified & directed.
Point wiring for one light point/ fan point controlled by one, one way switch with 1.50 sqmm PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.
All as per serial item No. 128.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on independent board complete all as specified and directed.
All as per serial item No.128.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on same board complete all as specified and directed.
All as per serial item No. 128.00 here-in-before but for one bell point controlled by one bell push complete all as specified and directed
Point wiring for one 6 Pin, 15/16 Amps socket outlet controlled by one switch on independent board with 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 volt grade including 4 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC in 25mm dia PVC conduit with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated & including suitable size boxes for housing of switches, sockets, regulators complete all as specified and directed. Note : (i) Unit rates quoted by contractor shall be deemed to included for cutting chases in walls, ceilings and making good surfaces in cement and sand mortar (1:3) and finishing the surfaces to match with existing surfaces. (Make : Hylem/Anchor including machine screws and washer etc for fixing switches sockets etc including 4 sqmm copper conductor, standard (green colour earth), PVC insulated unsheathed earth wire to commen earth and connected to earth dolly as specified and directed.
Switch piano, flush type, Single Pole, one way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.
Switch piano, flush type, Single Pole, one way, 15/16 Amp, 240 Volts (ISI Marked) complete all as specified and directed.
Socket outlet, 2 in 1, 3 pin, 5/6 Amp, flush type, 240 Volts (ISI Marked) complete all as specified and directed.
Socket outlet 2 in 1, 3 pin, 15/16 Amps, flush type, 240 Volts (ISI Marked) complete all as specified and directed.
Electronic fan regulator,Stepped type , flush type and connecting up, 120 watt, 240 volt (ISI marked) complete all as specified and directed.
Ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC / Polycarbonate,isolated body fixed as in repair complete all as specified and as directed.
Sub main wiring with 6.00 sqmm, two single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 6.00 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through PVC in 25mm dia PVC conduit incl taking existing complete all as specified and directed. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor and one run 25mm dia PVC conduit shall be measured & paid as one unit (running metre).
Sub main wiring with 4.00 sqmm, two single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 4.00 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through PVC in 25mm dia PVC conduit incl taking existing complete all as specified and directed. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor and one run 25mm dia PVC conduit shall be measured & paid as one unit (running metre).
MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles including taking down existing complete all as specified & directed.
MCB, SPN, 40 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.
LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with extruded aluminium housing & integrated electronic driver with all including taking down old unserviceable LED complete all as specified and directed .
LED tube light fittings of cap 10W , Two feet basic all purpose surface and wall mounted LED batten with extruded aluminium housing & integrated electronic driver with all including taking down old unserviceable LED complete all as specified and directed
Bell push, Single Pole, one way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.
Bell multi music, Single Pole, one way, , 230 Volts (ISI Marked) complete all as specified and directed.
Sheet metal enclosure powder coated single phase DB SPN 8 ways (2 +6way) and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.
Exhaust fan, steel body, AC single phase 230V of size 300mm sweep with blades and frames and louvers including making holes in to the wall as per fan size and making good the disturved surfaces complete all as specified and directed.
Supply, install, testing and commissioning including taking down of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ with front openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-INCOMING :- (i) MCCB 63 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No (ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos (iv) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos. OUT GOING :- (i) MCB 32 Amp,415 Volt,10 KA, Single pole and neutral -04 No (ii) S&F single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240V 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed .Make-HPL Cat part No SPPC131000000200C00 or other equivalent make in Neptune - 04 Nos
Street Light of capacity 30 Watt with inbuilt Driver having pressure die cast aluminium housing , IP 66 having efficiency >100 lumins/watt, operating voltage-120-270 volts, PF >.95, THD < 10 % Suitable for 30 to 40 mm O.D mounting pipe and suitable for mounting on wall/pole with. Necessary Mounting arrangements) including connecting up with three core twisted flexible copper conductor cable with suitable size. mounting pipe/Bracket, Nut Bolts and accessories including disconnected and taking down old US light complete all as specified and directed cat part No:- TRP-400-30-57-SL-LM -NSR or equivalent .
Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 deep below normal ground level and connected to and including galvanized earth lead wire 4mm dia upto 7.5 metre by means of GI nuts, bolt, check nuts, washers thimbles, etc as shown in electrical plate No 03 SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type to soil, returning fitting in and removal of surface spoil to a distance not exc 50 metre, PCC chamber (1:3:6) type C-2, charcoal and salt mixed layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe light grade 20mm bore for watering and 15mm bore meter long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers 75mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frame etc complete all as specified. Note - (i) PCC chamber shall be constructed at least 1.5m away from the earth electrode. The pipe for watering shall be provided in slanting manner. The cost of 7.50m GI pipe for protection of earth wire/strip .(ii) Quoted amount deemed to include the cost of excavation /earthwork , PCC pit , funnel , cover GI medium grade protectiom pipe.
M/s Ramesh & Company
Bhawani Constructions
M/s Fateh Enterprises
S.K. INFRASTRUCTURE
Leelashah Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .