GF 2024-2025

Amount

Labour charges for dismantaling the old damaged AC sheet roofing and the materials for required and clear the depost feom site etc., complete for standard as per specification

Labour charges for clean removal of cement plaster from wall and cleaning the depricies from the site and the rate including all cost and conveyance of material etc complete as per standard specification

Supplying and fixing of M.S. " L "ANGLES of approved design fortruss using necessary mild steel flats for inner and outermembers which should be fixed to "truss" inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.

Brick work in cement Mortar – 1:5 mix using best country Bricks and the rate including cost and conveyance of all materials and labour charges etc. Complete complying with standard specification.

Plastering in 1:5 mix to 12mm thick and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Plastering in 1:4 mix to 20mm thick and the rate including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification

Supplying and fixing of Pre polished Cuddapah slab of 25 mm thick with machine cut edge, set in cement mortar 1:3 (One cement and three sand) 12 mm thick base abpve the existing bed concrete and pointed with cement mortar 1:3(One cement and three sand) mixed with black oxide to full depth of slabs and rubbed smooth polishing to higher degree as directed by the departmental officers.

Painting two coats using with best colour and quality of Emlusion ACE (Anti fungrs paint) including cost one coat of priming coat etc.,

Painting two coats over old iron works and the rate including cost and conveyance of all materials and labour charges etc., complete complying with standard specification.

SRI BANNARI AMMAN TRADERS (BID ID -1280718)