ESTIMATE FOR REPAIR AND REHABILITATION OF THE REST HOUSE TIBRI UNDER JURISDICTION OF TIBRI SUB DIVISION.

Amount

Scraping of White wash and colour wash

12.5 mm thick cement plaster 1:3

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm). Double Rebate (60mm x 150mm)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35mm thick

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge Glazzed window

Teak wood wire gauge shutter spring (Single Leaf)

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with aluminum paint to give an even shade excluding priming coat

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Providing and laying four courses of water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown type bitumen grade 85/25 applied hot at 1.20 Kg. Per sqm of area for each course second course on roofing felt type 3grade-1 (Hession base self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or peasizes grit spread at 0.006cum per Sqm including preparation of surface complete

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in superstructure.

Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge

Providing & fixing 1‘-6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing1‘-6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/25mm dia. (ISI Marked) recessed in wall complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/universal Socket (shuttered), 6/10Amp. switches, 16/20Amp. switches with indicator etc. and covered with Frame etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, She plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface). Wiring fan point (with fan box)

wiring light point

wiring call bell point

wiring 6 amp wall socket point

wiring 16/20 amp power plug control point

wiring light point with double control switch

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES).

wiring tv socket point (one module)

wiring networking socket point RJ45

Two Way 6amp. Switch Flush Piano type

Single Pole 16/20amp. Switch Flush Piano type

One Way 6amp. Bell Push

5pin 6amp. Wall Socket Flush Piano type

Step type Fan Regulator Flush (Sicket size)

Telephone Socket Flush Piano type (switch size)

6/10amp. One Way Modular Switch (One Module)

Modular Cover Frame One or Two Module

Modular Cover Frame Four Module

Modular Cover Frame Six Module

Modular Cover Frame Twelve Module

Powder Coated Concealed Metal Box with Brass Lugs One/Two Module

Powder Coated Concealed Metal Box with Brass Lugs four Module

Powder Coated Concealed Metal Box with Brass Lugs Six Module

Powder Coated Concealed Metal Box with Brass Lugs Twelve Module

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 6-32amp. (10kA, Curve-C)

TP&N Horizontal Double Door Distribution Board 4 way each

Providing and laying 60 mm thick factory-made cement concrete interlocking paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design/shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., all complete as per directions of Engineer-in-Charge.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glossy/Highly Gloss finish/ Highlighter/ Emboss conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing in position Chinaware extended wall-mounted E.W.C. type suite (size 66 x 46 x 77.5 cm) with P trap or S trap of approved make (to the approval of the Engineer-in-Charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respects and to the entire satisfaction of Engineer-in-Charge. a) Chinaware extended wall-mounted E.W.C. with matching chinaware cistern and seat cover complete in all respects.

Providing and fixing in position Vitreous Chinaware white urinal with concealed or inbuilt P-trap (size 310x370x640 mm) with built-in water seal, outlet to wall, and water inlet from back of approved make (to the approval of Engineer-in-Charge) complete in all respects.

Providing and fixing partition for different type of urinals.19 to 20 mm thick Granite stone partition size 375mm x 750mm

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with mfittings for urinals complete.

Providing and fixing Stainless steel health faucet complete in all respect.

Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.ater Cooler Full Steel Body 40/80 ltr Capacity without Stablizer

Providing and fixing in position C.P elbow action pillar tap of approved make (to the approval of Engineer-in-charge) complete in all respect.(for washbasin)

Providing and fixing in position C.P elbow action bib tap of approved make (to the approval of Engineer-in-charge) complete in all respect. For bathroom

Providing & fixing in position 15 mm i/d C.P brass wall mixer of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineerin- charge) complete in all respect.

Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect. Single lever concealed divertor for bath and shower system (3 inletflow) with body and upper part

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.C.P. brass toilet paper holder

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia 610mm long

Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.CP brass Acrylic Shelf size(for palcing of soap)560mmx130mm

Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P. brass liquid soap container

Providing and fixing H.C.I.Floor traps conforming toI.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet, and overflow pipes but without fittings and base support for tank. (ii) Double Layer Tanks.

Providing and fixing in position automatic brass Ball Cock in tanks 25mm i/d

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-Charge) in PVC water storage tanks complete in all respects, G.I. tank nipple 25mm i/d.

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 25 o/d

SDR 11 CPVC pipes & fittings 20mm o/d

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Single Tee With Door

Vent Cowl

Coupler

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required.

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.C.P. brass Bib cock long nose/ long body foam flow without flange

Brass Bib cock/Stop cock 15mm x 400gm

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-incharge ) complete in all respect. 15mm i.d

Cement concrete 1:8:16 With brick ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres

Cement concrete 1:3:6 with brick ballast 20mm gauge mixing bymechcanical means using concrete mixture volumetric type

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:6in first storey upto 4 metres above plinth level

12.5 thick cement plaster 1:4

1.2 meter high G.I. barbed wire fencing with 1.8 meter angle iron posts 40x40x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications

visitor chair CHAIR

ALMIRAH

OFFICE TABLE (6X3

OFFICE BOSS CHAIR

BOX BED

11 SEATER SOFA SET

DINNING TABLE

SPLIT AC 1.5 TON- 3 STAR(MITSUBISHI)

KENT PURIFIRE WATER

LED TV 39‘‘ (ONIDA)

WATER HEATER (SHURBI)

REFRIGIRATOR

Poviding and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete

The Nangal Bagwan Coop LC Soceity ltd (BID ID -623226)

Rockbuild Contractors And Builders (BID ID -623885)