PROVISION OF CERTAIN LBW WORKS OF B/R AND E/M AT SUNJUWAN INCLUDING PROVN OF SUMP AT WATER PUMP HOUSE AT DAMANA UNDER GE JAMMU

Amount

B/R portion :- Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

M&L plain cement concrete 1:3:6 type C-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. .

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching for manholes, bands, coping, bed plates including slightly rounded or chamfered angles including necessary formwork complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and wall ramming in layers not exceeding 25cm in soft / loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement with WPC complete all as specified and as directed.

M&L for Pre cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover set in CM (1:4) including all necessary formwork and placing as where directed by Engineer-in-Charge complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire not less than 0.9mm dia, TMT bars complete all as specified and directed.

Taking down chowkhats or frames with shutter without taking off shutter from the frame exceeding 1.5 Sqm and not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

S&F Aluminium window with frame and shutter both wire gauge and glass shutter and frame made out of from 100mm X 44mm X 2mm thick and shutter made from 75mm X 44mm X 2mm thick all around including bottom rail, top rail and style including necessary hinges, 'D' type aluminium handle 100mm, 2 No's on each shutter, two No's aluminium tower bolt 125mm long on each shutter with aluminium beading to fixing of 4mm thick glass and gauge along with rubber beading and aluminium square stopper in centre of frame and accessories as required complete all as specified and MS wire mesh 1.50mm aperture with aluminium grill 50mm square complete all as specified and as directed by Engr-in-Charge. Note: - Sample of window kept in GE Jammu office.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed and removing unserviceable material outside cantt area.

M&L for rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

M&L for preparation of new surfaces of wall applying two coats of Oil bound distemper white or tinted including 1mm thick wall care putty complete all as specified and as directed.

Excavation in over areas in any type of soil exceeding 1.50 metre but not exceeding 3.0 metre in depth and getting out, complete all as specified and as directed.

M & L Hard core of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L RCC design Mix M-30 Foundations, including rafts, footings, foundation, beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed pile sand mass concrete complete all as specified and as directed.

M&L RCC design Mix M-30 Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached plasters and buttresses complete all as specified and as directed.

M&L RCC design Mix M-30 beams, cantilevers, bressumers, lintels over span 1.5m complete all as specified and as directed.

M&L RCC design Mix M-30 columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L RCC design Mix M-30 slabs supported on walls, beams and colunms in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

Formwork to fair faces of walls,retaining walls, abutnlents, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and fair finished surfaces complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC,PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide and fair finished surfaces complete all as specified and as directed.

Description same as per Ser item No 09.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

S&F Structural steel works as in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc and similar work conforming to and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, and length of bolt exc 15 cm and n exc 22.5 cm long and dia of neck 16 to 20 mm complete all as specified and as directed.

M&L Rendering 22mm thick in two layers of internal layer 12mm thick and external layer 10mm thick in cement mortar 1:3 on fair faces of brick / concrete surfaces finished even and smooth without using extra cement including water proofing compound complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

S&F mild steel plain sheet of thickness 0.63mm used in water tanks for providing water guards at each lift of casting RCC complete all as specified and as directed by Engr-in-charge.

E/M portion :- Supply and fix metal body water heater storage type (Geyser) 25 Ltr Cap, confirming to ISI, single phase with working voltage 240Volts, 50 Hz complete all as specified and as directed. Note:- (a) The housing for heating element and thermostat are to be separate. (b) Rates are deemed to be included the cost for fixing of 4 No's rawl plug of suitable size (4" to 6") nuts and bolts, grouting work in RCC / Brick wall.

M&L point wiring independent taking direct from existing main DB installed at entrance complete using with 2.5 Sqmm (nominal area), PVC insulated, multistranded, unsheathed, copper conductor cables drawn through and including concealed in PVC conduits with all accessories complete fixed to walls / ceiling etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light / fan / bell point controlled by one, one way switch complete all as specified and as directed.

S&F switch socket combination 2-in-1, 5/16 Amps, 5 in 1, flush type, with fuse and neon indicator complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting to existing pipe 15/20mm dia in position and insertion of T, additional alteration in position complete with GI fittings as required at site for connecting new GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fix Galvanised iron pipe medium grade of size 15mm/20mm complete with all fittings such as bend, tee, reducer, elbow and union of required size complete all as specified and directed. Note:- Rates are deemed to be included for fixing of MS clamps of suitable size to hold the GI pipe.

Supply and fix gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete of size 15 mm/ 20 mm dia complete all as specified and directed.

M&L PVC connection pipe heavy duty ISI marked of 15mm size with PTMT nuts of length 450mm from GI pipe to water cooler complete all as specified and as directed.

Supply and fix Bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe 15mm dia complete all as specified and as directed.

Supply and fix (NRV) metal electric water heater pressure relief check safety valve for 15mm dia pipe complete all as specified and as directed by Engr-in-Charge.

M&L in replacement for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through in new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.

Supply and Laying well burnt bricks, sub class 'B' bricks, laid breadth wise in trenches for protection of UG cable complete all as specified and as directed.

M&L for sand cushioning for protection of cable (below, above and around the cable laid in trenches) complete all as specified and as directed.

S&F GI tube light grade 40 mm bore laid in trenches / road / drain / wall alongwith all fittings complete with MS clamp and nut bolts and washers etc, including taking down old GI tubing along with all fixing accessories complete all as specified and as directed.

Supply and laying in trenches, fixing or passing through pipe, fixed to wall / pole, connecting and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm, 3.5 core, complete all as specified and as directed by Engr-in-Charge. Note: Wherever cable fixing/connection, suitable thimble should be used as per site situation.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with metallic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enamelled neutral bus bar 8 way dust and vermin proof suitable for incorporation of isolator / MCB's duly concealed in wall and making good the disturbed surface and colour matching complete all as specified and as directed.

S&F MCB single pole 240 volts, 06 to 40 Amps, "B" series 10 KA complete all as specified and as directed.

S&F MCB single pole neutral 240 volts, 40Amps, "B" series 10 KA complete all as specified and as directed.

S&F in replacement distribution board double door (suitable for incomer MCCB's and out going MCB) TP & N vertical load line 6 way complete with 200 Amps bus bar, 415 Volt sheet metal enclouser suitable for 'G' frame MCCB complete all as specified and as directed.

S&F in replacement isolator 4 Pole, TPN 415 volts, 100 Amps rating with rupturing capacity 16 KA, complete all as specified and as directed.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16KA complete all as specified and as directed.

M&L for Earthing complete with galvanized steel plate electrode of size 60 cm x 60cm x 6.3 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15cm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically up to top level of earth pit and then taken horizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate.

Supply, installation, commissioning of water cooler fully stainless steel, electric driven single phase having aprrox storage and nominal cooling capacity 60/120 ltrs complete all as specified and as directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130 v to 290 v with output voltage stabilized at 230 volt with accuracy of 3 mts +20 sec ITDS and of capacity 4 Amps complete all as specifed and directed.

M&L Rotational mounted polyethylene water storage tank of capacity 500 ltrs with closed top hoisted and fixed in position with necessary water connections and float valve complete all as specified and as directed by Engr-in-Charge.

Providing reinforcement cement concrete of 1:2:4 type B-1 with 20 mm graded crushed stone aggregate in foundation, including necessary demolition on existing floor for basement of water cooler and syntex tank complete all as specified and as directed by Engr-in-Charge.

M&L for replacement of cast iron water main with flanged and centrifugally cast class 'B' in any length laid in trenches of size 150mm bore complete all as specified and as directed.

M&L for replacement of CI fitting any type, radius and angle for spigot and socketed and flanged pipes, laid piece both end flanged or one end flanged other socketed, cap, plug, dead end flanged, split collar, reducer of any size upto 150mm bore pipe complete all as specified and as directed.

M&L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 150mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3mm thick conforming to ISI 14846/2000 complete all as specified and as directed. Make: - BIR/ BVI / Leader / Kirloskar.

M&L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 100mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3mm thick conforming to ISI 14846/2000 complete all as specified and as directed. Make: - BIR/ BVI / Leader / Kirloskar.

M&L for replacement of foot valve of size 150mm bore dia flanged end, lift type conforming to ISI 4038 with stainless steel working part complete with rubber gaskit and nut, bolts, washers etc complete all as specified and as directed by Engr-in-Charge.

M&L for replacement of foot valve of size 50mm bore dia flanged end, lift type conforming to ISI 4038 with stainless steel working part complete with rubber gaskit and nut, bolts, washers etc complete all as specified and as directed by Engr-in-Charge.

M&L for replacement of water pressure gauge 100mm dia having pressure 10 Kg complete with 3/8" brass sampling lock complete all as specified and as directed.

M&L for fabrication of angle iron base frame for centrifugal pumping set made out from angle iron of size 50 X 50 6mm thick, bend to shape, cutting, welding as per site requirement of suitable for pumping set complete with drilling, making hole 16mm dia for fixing pumping set including grouping / fixing in RCC and two coat painting of black synthetic enamel paint and a coat of red oxide primer complete all as specified and as directed.

M&L for replacement of nut, bolts fully threaded 30cm long X 16mm dia heavy duty complete with MS washer and bolt including grouping in RCC base platform complete all as specified and as directed.

Cutting to existing cast iron pipe of size 100 / 150 mm dia in position for insertion of Tee or for branch connection or for Addn / Altrn complete with and including necessary welding as per site requirement complete all as specified and as directed.

M&L for heavy duty MS column pipe with both end flanged of 125mm dia having length of 3 mtr complete all as specified and as directed.

S&F in replacement of rubber gaskit 150mm dia, 3mm thick for flanged joint complete all as specified and as directed.

Supply and fixing of submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 volts grade confirming to ISI complete all as specified and as directed by Engr-in-Charge.

S&F self pining centrifugal monoblock pumping set 1 HP single phase 240V 50 Hz having suction head 15 mtr and delivery head of 30 mtr confirming to ISI complete all as specified and as directed.

Charges for shifting / fixing to existing centrifugal pumping set 30 HP 3 phase 415 V complete with necessary arrangements for fixing of the foundation including necessary jointing materials MS flanges, Gaskits, nut, bolts and welding works if required as per site requirement and testing on full load complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S Sukhmani Construction Co.

M/S Shesh Paul Gupta

Bidder Name

M/S Shesh Paul Gupta

M/S Sukhmani Construction Co.

M/S LANGER CONSTRUCTION COMPANY