REPAIR TO TOILETS INCLUDING PLUMBING AND SANITARY ITEMS AT ZONE C AND ZONE D UNDER AOR OF AGE B/R DETT-III OF GE 862 EWS

Amount

S&F on site LLDPE septic tank designed to carry sewage and sullage water, exec in any type of soil, PCC 1:4:8 below foundation, vent shaft connection etc complete for 10 users capacity, complete all as specifed and directed.

S&F on site LLDPE septic tank designed to carry sewage and sullage water, exec in any type of soil, PCC 1:4:8 below foundation, vent shaft connection etc complete for 20 users capacity, complete all as specifed and directed.

M&L for construction of soakage well 1.8 m dia and 3.00 m deep including excavation and earth work in any type of soil, PCC 1:3:6, type C-2 in foundation, walls of honey combed masonry with top ring of M-25 concrete including intercerpting chamber and screen chamber made of brick masonry in cement mortar 1:4, RCC cover slab in M-25, interconnecting pipes of RCC, complete filled with brick bats including demolition of old unserviceable soakage well complete all as specified and shown on drawing No CE/TD 1202/2008 Sheet 1/2 and as directed at site by Engr-in-Charge.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation etc and n. exc 10sqm on plan and getting out in soft/loose soil for shafts, wells, manhole etc n. exc 10 Sqm on plan for sewage line & foundation, complete all as specified and as directed.

Demolition and breaking up existing sewage (SGSW/AC pipes and the like) of 150 mm bore set in cement morter including removing demolished material to a distance exc 50m and n. exc 100m, complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm bore RCC pipe, complete all as specified and directed.

M&L for 200 mm bore reinforced concrete pipe class NP-2, laid and jointed with collars and tested including demolition by breaking up old drain/sewage pipe including removing demolished material to a distance exc 50m and n. exc 100m, complete all as specified and directed.

S&F in repair 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F in repair 150 mm bore PVC (SWR) bend any radius , complete all as specifed and directed by Engr-in-Charge.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius , complete all as specifed and directed by Engr-in-Charge.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius , complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75/110 mm bore PVC (SWR) gully trap, setting and jointing with solvent cement, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 110 mm bore PVC (SWR) junction, single (single T ) equal or unequal, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75 mm bore PVC (SWR) junction, single (single T ) equal or unequal, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specifed and directed by Engr-in-Charge.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonery surface , finished the surface even and smooth without using extra cement, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specially provided for (Reinforced cut as required to facilitate demolition complete all as specified and directed.

M&L for factory made precast cement concrete covers of M-25 grade cement concrete of size as jointed with cement mortar 1:3 (1 cement 3 coarse sand), wherever required, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm (soil) complete all as specified and directed.

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, complete all as specified and as directed.

Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening, complete all as specified and directed.

M&L for rendering 20 mm thick in cement mortar 1:4 on other than fair faces of brick wall/ stone wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site, complete all as specified and directed.

S&F in repair for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

M&L for powder coated anodised aluminium window and ventilator shutters of any colour (thickness or powder coating not less than 50 micron) side hung type without sash, aluminium sections weighing 0.55Kg/M including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittnigs such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (3 Nos) suitable handle (2 Nos), complete all as specified and directed.

S&F for 100mm long butt hinges medium weight stainless steel (ISI Marked) , complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked), complete all as specified and directed.

S&F for extruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked), complete all as specified and directed.

S&F in repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 630 x 450mm with pedestal petturn and screwed for Iron pipe including waste coupling 32mm dia brass CP, PVC waste pipe 32mm bore 750mm long including porcelain sopper brackets, complete all as specified and directed.

S&F in repair for 15mm bore Angle valve, cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair for chromium plated soap dish, fixed with CP brass screws and wooden / plastic cleats, complete all as specified and directed.

S&F in repair for fancy type towel rail 600 mm long CP fixed with and including CP brass screws and wooden / plastic cleats complete all as specifed and directed.

S&F in repair for 15mm bore stop valve (concealed with cruntch or butterfly type) chromium plated, cast copper alloy screwed down, high pressure with long shank and cup, screwed both ends for iron pipe or brass ferrule fency type complete all as specified and directed.

S&F in repair for chromium plated brass shower rose of size 125 mm dia / square size with swivel joints, any size, fixing to steel pipes etc., complete all as specified and directed.

Taking down old unserviceable GI pipe of 15mm bore with all fittings etc, complete all as specified and directed.

Taking down old unserviceable GI pipe of 20mm bore with all fittings etc, complete all as specified and directed.

S&F for 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.

S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc, complete all as specified and directed.

S&F in repair for vitreous china half stall type urinals, aqua seal premium quality, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, waste pipe, grating and union for discharge pipe, complete all as specified and directed.

S&F in repair for vitreous China water closet (squatting pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.

S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including PVC flushing cistern 10 ltr capacity and fixed in floor with brass screw, plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, and inlcuding set of CP jet spray with flexible PVC pipe of superior quality, complete all as specified and directed.

S&F as in repair for viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed.

S&F in repair for sheet glass shelf assembly consisting 5.5 mm thick, sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair for PVC waste pipe 32mm dia 900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S&F in repair for brass cromium plated basin mixer for mixing hot and cold water for wash hand basin of 15mm dia screwed down for iron pipe, complete all as specified and directed.

S&F in repair brass cromium plated wall mixer 2 in 1 two for hot and cold water and one for shower rose 15mm dia screwed down for iron pipe, complete all as specified and directed.

M&L in repair for water proofing treatment to sunken portion (floor or wall) of WCs, bathroom etc by :- (a) Complete removal of existing filling and treatment over RCC slab and making a slope of 1:8 in and including PCC 1:2:4 with minimum thickness 30mm using 12.5mm graded stone aggregate and providing on wall and floor joints with cover fillet in PCC 1:2:4 having radius of 70mm. (b) First layer of slurry of cement @0.488 Kg/sqm mixed with Acrylic based polymer modified cementeous composite compound @0.126 Kg/Sqm. This layer will be allowed to air cure for 4hrs. (c) Second layer of cement slurry @0.242 Kg/Sqm mixed with Acrylic based polymer modified cementious composite compound @0.126 Kg/Sqm. This layer will be allowed to air cure for 4hrs. (d) Sealing of joints of trap/WC/Soil pipes with sealing compound of MC Bouchemie/ Roofex/ Forre/ Choksy/ Dr Beck & Coty/ Fosroc ,complete all as specified and as directed.

S&F in repair 15mm CP brass health faucent (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.

S&F in repair 15mm bore Swan neck Pillar Cock, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as speicified and directed.

S&F for rotational moulded polythylene water storage tank with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for plastic water closet seat cover black/white colour close pattern with flat bottom and cover and mild steel chromium plated aluminum hinging device for pedestal pattern WC, complete as in repair all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cells, cooking platforms and like in C.M 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, laid over 20mm thick CM 1:4 including rounding the edges, cutting polishing, complete as in repair all as specified and directed.

S&F in repair of 15mm ball brass valve, high pressure, with polythene float and flynut with screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares n . exc 0.50 sqm in each pane complete including hacking out old broken glass all as specified and directed.

S&F in repair MS frame work as in grills gratings, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar works confirming to FE290, E-165 etc including taking down old ventilators, complete all as specified and directed by Engr-in-Charge.

S&f in repair for stainless steel grating suitable for 75/100 mm bore floor trap and fixed with white cement complete, all as specified and directed.

S&F overhead PVC water tank cover threaded or plug type suitable for tanks of 500/1000 ltr capacity, complete all as specified and directed by Engr-in-Charge.

S&F in repair viterous china counter top wash hand basin coloured, oval type of size 550mm, including cutting for and pinning in, (excluding waste pipe) , complete all as specified and directed.

S&F in repair for 600mm towel rack with lower hangers by replacing the existing tower rail etc, complete all as specified and directed.

M&L for overhead PVC tank cleaning of any capacity and including dismantling and refixing at same place including repair/replacement of required fittings (PVC Ball valve with Brass Rod, tank nipple etc), complete all as specified and directed.

M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) including demolition of old/existing PCC plinth protection, complete all as specified and directed.

M/S RAHUL GUPTA (BID ID -3302732)

MEHTA OM PARKASH (BID ID -3303682)