Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹26,000
Closing Date
20 Mar 2025, 11:00 amClosed
Ex. Engineer JS PHE Ground water Division Srinagar
Ex. Engineer JS PHE Ground water Division Srinagar, Bagli Ali Mardan Nowshera Srinagar
Construction of Bore well near CRPF Camp 110 Bn, Pyt Halqa Lethpora Pulwama by way of (Providing and fitting of 7.5KVA manual type Voltage Stabilizer for Submersible motor installed in the Bore Well)
2025_PHE_274330_1
e-NIT 74 of 2024-25
Open Tender
Electrical Goods/Equipments
Item Rate
10 days
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹50
Yes
Ex. Engineer JS PHE Ground water Division Srinagar
Yes
24 Mar 2025
14 Mar 2025
21 Mar 2025
14 Mar 2025
20 Mar 2025
14 Mar 2025
Amount
S/I/T/C of 7.5 KVA Voltage stabilizer stabilizer for 2 HP Submersible motor installed inside 125 mm dia well of following specifications: Rating : 7.5 KVA Phases: 01 No, 50 Hz frequency Input voltage: 70v + 10% on single phase AC Supply Output voltage: 220+10% single phase AC Supply Terminals: 01 No incoming, 01 no outgoing Core: The Voltage stabilizer shall be fitted with high permeability core for efficient heat dissipation and the core strips shall be held together firmly and fitted on bracket of suitable size and thickness. Coils: One no copper wound coils shall be fabricated out of copper conductor with cotton tapping. Voltage regulator: The voltage stabilizer shall be fitted with 6/8 no of steps, single phase 60 A Stepping up voltage regulator disc/drum/plate type having copper contact points. Panel: The indicating panel shall be fitted on the top side of voltage stabilizer fabricated out of suitable thickness MS Sheet and fitted with volt meter and indication lamps. Meters: Suitable size, digital, single phase. Enclosure: The whole assembly shall be enclosed in MS Tank of suitable thickness floor mounted. Coolant: The stabilizer shall be filled with grade T- oil up to the required level. The job includes necessary suitable size copper thimbling for input and output wire.
M/S BONAFIDE ENGINEERS (BID ID -2348997)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .