Installation of Separate Transformer for UIET Building at Kurukshetra University Kurukshetra

Amount

Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

Extra for using salt and char coal/coke for pipe earth electrode as required

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

Laying of underground cable 0.75 metre below ground level covered without sand and bricks including excavation and refilling of trenches 185 sqmm to 240 sqmm 3 to 3½ Core

Laying of underground cable in pipe /existing open/closed trench etc as required 185 sqmm to 240 sqmm 3 to 3½ Core

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and up to 11.0 metre

Laying and erection of XLPE II or 33 kv HT aluminium conductor armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required up to 120 sqmm 3 core XLPE Cable

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

Design, Supply & erection of transformer of standard make Required 11/0.433 KVA rating outdoor type 11 KVA, G.O. Switch, H. Pole, battery charges, earthling, safety equipment, fenced enclosure for transformer, and any other contingent thereto complete in all respect as per approved make and directions of Engineer-in-charge as per respective capacity. Make:- Kirloskar/ Cormption/Bharat Bijli/ Amsons/Jay-Bee/Alstom/ NGEF 300 KVA

Supply and erection of High Tension Voltage caution notice plate of size 250x200 mm in three languages.

S/E stay wire complete with anchor rod henly type complete with 11KV Disc. Insulator and stay wire of required length including the cost of all material i.e. nut bolts, clamps etc. required to complete the job in all respect upto entire satisfaction of engineer-in-charge.

Supply and erection M.S. Channel/angle iron including clamp and nut bolts etc. complete in all respect.

Supply and erection of 6 SWG ACSR conductor on exiting pole including binding the same on pole with insulator and cable as complete as per entire satsfaction of Engineer-in-charge

Provinding and fixing of 11KV hanging hook on pole for erection of XLPE cable on pole complete as per entire satisfation of Egineer-in-charge.

Supply and erection of PVC pipe of 6 kg. pressure size 80 mm dia laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. complete upto the entire stisfection of Engineer-in-Charge of work.

Supply of 70 mm x 3 Core HT XLPE armourd Cable to be installed on poles complete upto the entire stisfection of Engineer-in-Charge of work Make; Havells/Polycab/KEI

Supply of 240mm 3.5 core armourd cable of Make: Havells/ Polycab/ K.E.I

Supply of PCC Pole as per IS: 1678-1960 9 Mtr. Long 105mm X 115mm at top and 105mm X 315mm at bottom with working load of 200 Kg of good quality as per UHBVN Specifications.

B K ELECTRICAL WORKS

Chopra Electric Company