Strengthening of the road from Kurumudithangal Arumbakam road KM 0/0 - 1/470 ( Using Plastic Waste)(R-5) Arcot Blockat Ranipet District MGSMT 2025-26 Phase III

Amount

Arcot Block

Strengthening of the road from Kurumudithangal Arumbakkam road Km 0/0 - 1/470 (R-5) VPR (Using Plastic waste) in Arcot Block, Ranipet District

Clearing the scrub jungles including cutting the scrubs and removing away from site etc complete]

Picking 5 Cm to 10 cm of existing wornout BT / WBM Surface sectioning in all labour charges etc complete

Earthwork excavation in all classes of soils and subsoils including shoring and strutting with initial lead and lift etc complte, as per MOST specification asper SS20 A.

collection and supply of Gravel from approved quarry an average lead 1km including cost and conveyance of all materials to site anf labour charges etc.

Construction of granular sub base by providing close graded materials mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor etc

Providing & Laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges rentals for machinery, fuel and all other incidental charges etc, completed as per clause of MORTH Rev-5.

Applying Prime coat over WMM surface using 7 kgs of bitumen emulsion (SS1) per 10 sqm for preparatory to another bituminous construction over it including cost of bitumen emulsion including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges as per Clause 502 of MORTH Rev-5.

Applying Tack coat over WMM surface using 2.50 kgs of bitumen emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of bitumen emulsion including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges as per Clause 502 of MORTH Rev-5

Advance patch work for making up the undulation in the existing B.T surface to an average thickness of of 50mm using 45mm IRC size HBG metal

Advance patch work for making up the undulation in the existing B.T surface to an average thickness of of 25mm using 13.2 to11.20mm IRC size HBG metal

Applying tack coat over BT surface (not treated with primer) using 3Kg of bituminous emulsion per 10 Sqm. including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recovered at the rates as per special conditions appended herewith including conveyance of bituminous emulsion to actual work spot handling charges including labour charges for brushing, cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the required quantity of bituminous emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags etc., complete as per standard specification.

Providing, laying 50mm consolidated thick Bituminous Macadam using 0.20cum of 26.50- 13.20mm, 0.43cum of 13.20-2.36mm and 0.08cum of 2.36mm & below size IRC metal with 34.04 Kgs of VG30 Grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in required temperature using Central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 504 of MORTH Rev-5

BITUMINOUS CONCRETE 25, 30/40 MM THICK USING cmp (Grade-II) Providing and laying Bituminious concrete to 40mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5

Provision for Hectometer stone

Provision for KM stone

60 cm equilateral triangle(cautionary)sign board

60 cm Circle Mandatory sign board

Sub estimate Culvert 3M span CH @ 0 m

Removal cut stone inclunding cost and conveyance etc

Dismantling of Random rubble masonry in CM 1:5 mix with simultaneous inclunding cost and conveyance etc

Earthwork excavation in all classes of soils and subsoils including shoring and strutting with initial lead and lift etc complte, as per MOST specification asper SS20 A.

Cement concrete 1:4:8 mix using 40mm HBG metal inclunding cost and conveyance etc

Supplying and erecting centering for sides & Soffits to concrete works inclunding cost and conveyance etc

Supplying and erecting centering for sides & Soffits to concrete works inclunding cost and conveyance etc

Supplying and erecting centering for sides & Soffits to concrete works inclunding cost and conveyance etc

Cement concrete 1:3:6 mix using 20mm HBG metal inclunding cost and conveyance etc

Cement concrete 1:2:4 mix using 20mm HBG metal inclunding cost and conveyance etc

Supplying and fabrication of steel inclunding cost and conveyance etc

RCC 1.1:5.3 mix using 20mm HBG metal inclunding cost and conveyance etc

Providing and fixing 20mm Bitumen felt for expansion joint between Dirtwall & Deck wall

Providing weepholes in brick masonry / stone masonry plain reinforced concrete

Sub estimate Culvert 1.5M span CH @ 770 M

Earthwork excavation in all classes of soils and subsoils including shoring and strutting with initial lead and lift etc complte, as per MOST specification asper SS20 A.

Cement concrete 1:4:8 mix using 40mm HBG metal inclunding cost and conveyance etc

Supplying and erecting centering for sides & Soffits to concrete works inclunding cost and conveyance etc

Supplying and erecting centering for sides & Soffits to concrete works inclunding cost and conveyance etc

Cement concrete 1:3:6 mix using 20mm HBG metal inclunding cost and conveyance etc

Cement concrete 1:2:4 mix using 20mm HBG metal inclunding cost and conveyance etc

Supplying and fabrication of steel inclunding cost and conveyance etc

RCC 1.1:5.3 mix using 20mm HBG metal inclunding cost and conveyance etc

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

MPANDCO (BID ID -1447938)