PROVN OF 01 SYNTHETIC VOLLEY BALL AND 01 LAWN TENNIS COURT AT DAD HQRS OFFICE ULAN BATAR ROAD DELHI CANTT UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Rough excavation not exceeding 1.5 metre deep and getting out in Soft/loose soil complete all as specified and as directed.

Removing excavated soil from site to a distance exc. 1.50 Km but not exc. 5 Km and depositing where directed at a level not exc. 1.5 Metre above the starting point complete all as specified and as directed.

Rolling and consolidating court formation surfaces with 8 to 12 tonne power roller including watering and consolidating to the level & gradient as required complete all as specified and as directed.

M&L for Treating the top surface with herbicide treatment of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L 100 mm thick (Spread thickness) soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L 100 mm thick (compacted thickness) WBM with coarse aggregates of grading 1 (92 to 40m size) spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.

Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with Paving bituminous primer at the rate of 10 Kg per 10 Sqm complete all as specified and as directed.

M&L Premix bituminous, macadam 40mm compacted thickness, using Paving bitumen laid/rolled and compacted to required gradient and camber complete all as specified and as directed.

Preparing the black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L Bituminous premix asphaltic dense concrete 25mm consolidated thickness with 6% binder content by weight of total mix, rolled and compacted to required camber and gradient complete Bituminous premixed carpet, using Paving bitumen complete all as specified and as directed.

M&L for Premixed sand seal coat with 0.06 Cum of sand mixed with 6.8 Kg of paving bitumen per 10 Sqm, applied and rolled to a uniform smooth surface complete all as specified and as directed.

M&L Synthetic acrylic flooring of 8 layers for Lawn Tennis Court and vollyball court over existing premixed carpeting placed and prepared as per manufacturing instruction complete all as specified and as directed. The various layers of synthetic flooring shall be as under :- (i) 1st Layer : Primer - 1 layer (ii) 2nd Layer : Resurfacer - 2 layers (iii) 3rd Layer : Cushion Layer - 3 layers (iv) 4th Layer : Colour and lining - 2 layers

Excavation in post holes (or similar holes) in Soft/ Loose soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & well ramming and removing surplus soil out side the premises & making good surface complete all as specified & as directed.

M & L for PCC 1:2:4 type B-2, using 40 mm graded stone aggregate, as in Posts, pillar, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified & as directed.

S&F mild Steel tubular works including special shaped washer etc, using ERW or induction butt welded tubes conforming to I. S.1161- 1979, grade St.-240 etc for goal post including fixing arrangement including Hooks as required complete all as specified & as directed.

S&F mild Steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & as directed.

S&F Mild steel galvanised chain link fencing with dia of wire 3.14 mm and size of mess 50mm x 50mm as approved by Engr- in- Charge complete all as specified and as directed.

S&F mild steel screw bolts 11 to 15 mm dia of neck (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 10 cm not exc 15cm long complete all as specified and as directed.

M&L for Preparation of new or untreated steel surfaces of any description exc. 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide/zinc chrome primer complete all as specified and as directed.

M&L for Preparation of new or untreated steel surfaces of any description not exc. 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide/zinc chrome primer complete all as specified and as directed.

S&F mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including passing through chain link fence at intervals as directed, using mild steel Fe-410-W (Grade E-250), quality-A or Fe 290 (Grade E-165) complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan not exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M & L PCC 1:3:6, type C2 (Using 40mm graded stone aggregate) as in surfaces channels, drains etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of walls including finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) in lintels up to 1.5m clear span, cills, copings, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L hard core of broken stone or boulder of gauge exc 63mm but not exc. 100 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered & rammed to a true surfaces compete all as specified and as directed.

M & L 100 mm thick Plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete all as specified & as directed.

M&L for cement concrete rich colored chequered tiles machine pressed with imported pigment finish (mirror/rough cast) of size 300mmx300mmx(20 to 25 mm thick), set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.

S&F factory made, precast, cement concrete kerb stone, M-25 grade, size 450mm x 300 mm x 150 mm of approved pattern, set & jointed in cement mortar 1:4, including necessary earth work etc complete all as specified and as directed.

M/S GEETANJALI ENTERPRISES

M/s SAAR ENGINEERS