REPAIR TO MISC FURNITURE OF OTM ACCN OF RANCHI AND JAMSHEDPUR AND CHARPOY GI PIPE UNDER GE RANCHI

Amount

Removing of unserviceable/broken parts of Chair wooden bottom without damaging of other parts of chair wooden bottom, supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-285)

Rear leg. (FD-285)

Front leg.(FD-285)

Side/Front/Rear rails.(FD-285)

Back rest.(FD-285)

Stiffener (Side & Central one).(FD-285)

S&F with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair wooden bottom.(FD-285)

Tightening of all parts/joints of whole Chair wooden bottom with bamboo pins. (FD-285)

S&F in replacement of 6mm thick plywood BWR Gde as per IS:303 to seat of chair wooden bottom with steel screw complete all as specified in drg and as directed. (FD-285) Make of Plywood:- Archidply/Centuryply/Greenply

Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair dining and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-279)

Rear leg. (FD-279)

Front leg.(FD-279)

Side/Front/Rear rails.(FD-279)

Back rest.(FD-279)

Stiffener (Side & Central one). (FD-279)

S&F with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining. (FD-279)

Tightening of all parts /joints of whole chair dining with bamboo pins. (FD-279)

Removing of unserviceable/broken parts of Chair Writing without damaging of other parts of chair writing and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-280)

Rear leg. (FD-280)

Front leg. (FD-280)

Side/Front/Rear rails. (FD-280)

Back rest. (FD-280)

Stiffener (Side & Central one). (FD-280)

Arms. (FD-280)

S&F with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Writing .(FD-280)

Tightening of all parts/joints of whole Chair Writing with bamboo pins. (FD-280)

Removing of unserviceable/broken parts of Chair Easy without damaging of other parts of chair easy and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD-229)

Front/Rear leg. (FD-229)

Front/Rear stiffener. (FD-229)

Arms. (FD-229)

Front & back rail of seat/back. (FD-229)

Side rail of seat/back. (FD-229)

S&F in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak/shisham made to shape and size complete all as specified and shown in drg and as directed. (FD-229)

All as per Srl. Item No. 4.06 here-in-before but back frame of chair easy. (FD-229)

Tightening of all parts/joints of entire Chair Easy with bamboo pins. (FD-229)

S&F with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy. (FD-229)

Removing of unserviceable/broken parts of Chair dining cushion without damaging of other parts of chair dining cushioned and supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. (FD/MAP-II/04)

12mm thick MR Gde Plywood seat with cushion of size 450mm x 450mm and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- Per RM). (FD/MAP-II/04)

S&F of tapestory cloth in replacement of old cover of chair dining cushioned. (Tapestory cloth shall be not less than Rs.350/- Per RM). (FD/MAP-II/04)

Front leg. (FD/MAP-II/04)

Rear leg. (FD/MAP-II/04)

Back Vertical stripps. (FD/MAP-II/04)

Back rest. (FD/MAP-II/04)

Stiffener (Side & Central one). (FD/MAP-II/04)

Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. (FD/MAP-II/04)

S&F with steel screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining cushioned. (FD/MAP-II/04)

Removing the old cane from various chairs and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour. (Make: Shah/Premier/ BR Super), complete all as specified and as directed. (FD-252, 229, 279 & 280).

Taking down and removing the old cane from seat and back of Chair Verandah and recanning with new half round 4mm wide plastic cane in oval shape with mat pattern. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super), complete all as specified and as directed. (FD-359)

M&L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed. (FD-359)

S&F in replacement of unserviceable portions of frame of Chair Verandah with 19mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as specified and directed. (FD-359)

S&F in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete. (FD-359)

Taking down and removing the old tapestory cloth and unserviceable cushion/foam of old seat and back of Sofa Set 5 Seater (3+1+1), supply and fixing of new cushion/foam 32 density(50mm to 100mm thick) all as per ground requirement of sofa set and upholstory with new tapestory cloth (not less than Rs. 950/- per RM) to sofa Set complete with four legs (woodn/PVC/Steel) all as specified and as directed. (Cushion / Foam shall be of make: Sleepwell/Kurl-on/Coir-Foam) (FD-TP)

Removing of unserviceable/broken parts of Hat Stand with Mirror without damaging of other parts of Hat Stand with mirror, supply and fixing new parts made out of 1st class hard wood teak/shisham as shown on drg and specified (FD-233)

S&F one side teak face veneer plywood 4mm thick to front side of Hat Stand with mirror all shown on drg, complete as specified and directed . (FD-233)

All as per item No 12.01 above but back ply 6mm thick MR Gde to Hat Stand with mirror. (FD-233)

S&F in replacement of Pegs 75mm long brass of Hat Stand with Mirror. (FD-233)

S&F in replacement of looking mirror 5mm thick all as per shown on drg (FD-233)

Removing of unserviceable/broken parts of Bed Hard (MAP) without damaging of other parts of Bed Hard, supply and fixing new parts as shown on drg and specified. (FD/E6/MAP/08(R)).

S&F in replacement of plywood BWR Gde as per IS:303 of size 1980 x 900mm of Make:- Archidply/Greenply/Centuryply with necessary steel screw to top of Bed Hard MAP and all as shown on drg. (FD/E6/MAP/08(R)).

S&F in replacement of Head board of Bed Hard MAP made of 18mm thick prelaminated MDF Board both side laminated with PVC edging Tape as per shown on drg. (Make of MDF Board:- Ashish/Action Tesa/Century/ Greenply)

All as per Srl. Item No:- 13.02 here-in-before but foot board of Bed Hard MAP. (FD/E6/MAP/08(R))

S&F in replacement of PVC shoes to legs of Bed Hard MAP all as per shown on drg and directed. (FD/E6/MAP/08(R))

Removing of unserviceable/broken parts of Charpoy I.P with hard Top (MAP) without damaging of other parts of Charpoy I.P with hard top, supply and fixing new parts as shown on drg and specified. (FD/MAP-II/01)

S&F in replacement of plywood BWR Gde as per IS:303 of size 1980 x 900mm of Make:- Archidply/Greenply/Centuryply with necessary steel screw to top of Charpoy I.P with Hard Top and all as shown on drg. (FD/MAP-II/01)

S&F in replacement of PVC shoes to legs of Charpoy I.P with hard Top all as per shown on drg and directed. (FD/MAP-II/01)

Dismantling & re-assembling/tightening of all members/parts of charpoy G.I. Pipe carefully including removing of any type newar / nylon newar/plywood from charpoy and segregate the serviceable and unserviceable parts and stacking of serviceable parts complete as per directed. (FD-220) (Note:- Unserviceable spares will be measured and paid separately)

S&F new long rail of G.I tubing 32mm bore medium grade duly threaded both ends all as specified and shown on drg as directed. (Make:-Jindal/TATA/Prakash(Surya)/ Bansal (FD-220)

Labour only short rails as made out from the unservi-ceable long rail parts under item No 15.00 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed. (FD-220)

Labour only leg as made out from the unserviceable short rail under item No 15.00 above including cutting and threading at one end and fixed in position complete as per drg and directed. (FD-220)

Supply only G.I elbow three way of size 32mm bore ISI mark. (FD-220).

Supply only G.I check nut of size 6mm thick 32mm bore ISI mark. (FD-220).

S&F in replacement of old unserviceable wooden blocks/ MS Sheet with new one made of 2nd class hard wood to legs of charpoy G.I Pipe all as per directed by Engr-in-Charge. (FD-220)

S&F the ply wood 12mm thick BWR Gde as per IS:303 on top, suitable for G.I Charpoy as shown in drg of approximate size of 1980x900mm with mild steel galvanised iron nuts and bolts of size 70mmx6mm with G.I Washer (heavy weight). (Nos of nuts and bolts to be used is 11 Nos) including one stiffener of length 825mm approx made out of G.I tubing 20mm bore medium grade will be welded under the Plywood top as approved by Engr-in-Charge. (Make of plywood :- Archidply/ Centuryply/Greenply/.(FD-220)

Removing the unserviceable plywood and supply and fixing in replacement of plywood only of size 1980x900mmx12mm thick BWR Gde with old plywood of charpoy G.I as per IS:303 all as directed. (Make of plywood :- Archidply/ Centuryply/Greenply. (FD-220)

Material and labour for French polishing to chair wooden bottom after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair wooden bottom complete all as directed. (FD-285)

All as per Srl item No 16 here-in-before but chair dinning. (FD-279)

All as per Srl item No 16 here-in-before but chair writing. (FD-280)

Material and labour for French polishing to chair Easy after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair easy complete all as specified and directed. (FD-229)

All as per Srl item No 19 here-in-before but chair dining cushioned. (FD/MAP-II/04)

M&L painting to frame of chair verandah with white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos PVC shoes of white colour to legs of chair Verandah as specified and directed. (FD-359)

Material and labour for French polishing to sofa set 5 seater after removing the old polished and prepration of wooden surface by providing putty and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as specified and directed. (FD-TP)

Material and labour for French polishing to Hat Stand with Mirror after removing the old polish from emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces of Hat Stand with Mirror complete all as directed. (FD-233)

Material and labour for painting to frame of Bed Hard MAP with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe as specified and directed. (FD/E6/MAP/08(R)

All as per Srl. Item No. 24 here-in-before but Charpoy I.P with hard top MAP. (FD/MAP-II/01)

Associated Engineers

M/s Dwarika Nath Singh

M K Enterprises

Raj Construction

Capital Construction Company

M/s Mukesh and company

Jain Associates