Replacement of street light and LED fittings in Civil Hospital Sunni District Shimla.

Supplying and fixing of integral LED Post of Lentern 45 watt of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories including making connections, testing etc. as required. :

LED Post of Lentern 45 watt:

Supplying and fixing of integral LED Street light fixture of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories including making connections, testing etc. as required. :

LED Street light fixture 60watt:

S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings.:

Specification of LED fittings::

Wattage of LED fittings :As per following parameter.

Total lumens of the fittings. :as below

Diffuser : Polycarbonate diffuser/PMMA

Operating voltage :140 V to 270 V, AC supply or better.

Input frequency :50 Hz + 1 Hz

Power factor :Minimum 0.90

Luminaire efficacy :>100 lm/w

Color rendering index:CRI shall be greater than 80

Working/ operating temperature :00 to + 450c or better

Color temperature :60000K + 10%

Electronic Driver :

Drive current (LED):As per OEM.

Operating voltage :140 V to 270 V AC supply or better

Type of driver :Constant current output driver

THD :Less than 10%

Surge Protection :2.5 KV minimum

Efficiency Driver:>85%

Protection:Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :2 years against manufacturing defect.

Fixture :Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:25000 burning hours at 70% lumen maintenance

Lumen output of the fitting:Rate

1000:LED Miror light

S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.:

Specification of LED fittings::

Wattage of LED fittings :As per following parameter.

Lumen output of the fitting:as below

Diffuser : Polycarbonate diffuser/pmma

Operating voltage :140 V to 270 V, AC supply or better.

Input frequency :50 Hz + 1 Hz

Power factor :Minimum 0.90

Luminaire efficacy :>85 lm/w

Color rendering index:CRI shall be greater than 80

Working/ operating temperature :00 to + 450c or better

Color temperature :60000K + 10%

Electronic Driver :

Drive current (LED):As per OEM.

Operating voltage :140 V to 270 V AC supply or better

Type of driver :Constant current output driver

THD :Less than 10%

Surge Protection :2.5 KV minimum

Efficiency Driver:>85%

Protection:Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :2 years against manufacturing defect.

Fixture :Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:50000 burning hours at 70% lumen maintenance

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type.:

66.02:Exhaust Fan, Light duty, (Domestic) 225/230 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Heavy Duty type.:

67.01:Exhaust Fan, Heavy duty, 300 mm sweep (900/1400rpm)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator):

32.03:12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.:

33.01:Single pole

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.:

Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.:

64.02:Ceiling Fan 1200 mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating Five star BEE rating and safety valve installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- :

62.05:25 Liter capacity water heater (Cat-A)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. :

70.01:Armoured cable 6 sq. mm (twin core)

S/E of MCCB 4 Pole 415 Volt. with Microprocesser Release for overload and short circuit protection breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle.:

30.01:MCCB 40- 100 Amp. 36 ka 4 Pole Release with rotary handle

30.06:MCCB 200/250 Amp. 36 ka 4 Pole Release without rotary handle

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.:

10.04:2 X 6 sq. mm + 1 X 6 sq. mm earth wire

10.05:2 X 10 sq. mm + 1 X 6 sq. mm earth wire

10.08:4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.:

11.02:2 x 1.5 sq. mm

11.05:2 x 2.5 sq. mm

11.08:2 x 4 sq. mm

11.1:4 x 4 sq. mm

S/E of LED Panel with PDC body and prismatic diffuser to be mounted in recess The job includes carriage, erection, making connections testing and commissioning of the fittings.2 * 2 feet:

Specification of LED fittings::

Wattage of LED fittings :As per following parameter.

Total lumens of the fittings. :as below

Diffuser : Prismatic multilayer diffuser UGR <19

Operating voltage :140 V to 270 V, AC supply or better.

Input frequency :50 Hz + 1 Hz

Power factor :Minimum 0.90

Luminaire efficacy :>120 lm/w

Color rendering index:CRI shall be greater than 80

Working/ operating temperature :00 to + 450c or better

Color temperature :60000K + 10%

Electronic Driver :

Drive current (LED):As per OEM.

Operating voltage :140 V to 270 V AC supply or better

Type of driver :Constant current output driver

THD :Less than 10%

Surge Protection : 2.5 KV minimum

Efficiency Driver:>85%

Protection:Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver :2 years against manufacturing defect.

Fixture :Should comply with LM 79 test from UL/NABL lab.

LED Type/ Make/ Model:Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED:50000 burning hours at 70% lumen maintenance

LED 36 WATT :