Additional improvement to Urban Primary Health Center at Neelikonampalayam in ward No 54, East Zone,Coimbatore Corporation

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and cleaning and levelling the site etc.,complete(CBE 24-25 p.no-125 item no-2c)

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification (CBE 24-25 p.no-126 item no-3)

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M Sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.(CBE 24-25 p.no-42 item no-5)

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm(83/4"x41/4"x23/4") includingcostofmaterialsand labour charges etc., as per standard specification - 1m3

Plastering with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.(CBE 24-25 p.no-30 item no-3)

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Supplying and Laying RubberMoulded Hydraulic Pressed Paver Block Providing and laying of 83mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to belaidin flurring bonepattern with stone dus tcushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion150mmthick laying outofpavement cut thepieces to fixtheedge vibring thepaversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supply and Fixing of MS Truss with purlins including all labours and transports charges as per direction of departmental officers.,

Supply and fixing of Galvalume Colour Sheet of size 0.47mm including all cost and standard specifications, complete for all leads & lifts. etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)LouveredVentilatorsof fromtheprofilethe sizeofouter frame60mmx58mmandshutterprofile sizeof 60x78mmbothprofilesare reinforcedwith GI/1mm125GSMand100%corrosionfree, theprofile aremulti chamberedsectionswithwall thickof2mm. TheEPDMrubber (blackcolour)coveredwithallover the edges of frame and shutter. The corners and joints shouldbeweldedandcleaned. Radiationspin headed glass 4mmthick should be provided in the louvers.Thewindowshouldbefixedtothewallwith 100%packing with screws and silicon packing all round the frames. The ventilator should be got approved fromtheExecutiveEngineerbeforeuseon work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Windowsof casement type(open) fromthe profile the size of outer frame 60mmx 58mmand shutter profile are reinforcement withGI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDMrubber (blackcolour)coveredwithoverall the edges of frame and shutter the shutter will be providedwithspagmultipowerpoint locksandalsoit operatesashandle.Thecornersandjointsshouldbe weldedandcleaned.Radiations freepinheadedplain orbrownolourglass4mmthickshouldbeprovidedto theshutter and it shouldnot allowleakageofwater even atmost ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and ergyloss.Theconnectingmechanismbetweensash andouter framethatenablesopeningof thewindow. Thewindowshouldbe fixed to thewall with100% packingwithscrewsandsiliconpackingall roundthe frames.Thewindowshouldbegotapprovedfromthe executive Engineer before use on work

Providing and fixing MS door using 40X40X6mm MS angle for door frame, 25X25X5mm for door shutters allround, at center and for diagonals for stiffeners and 3mm MS gusset plates at the junctions and corners and using 18 gauge MS plate for shutters with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel primer.

Supply and fixing of 300 mm Sweep Exhaust fan with stepped electronic 300 W regulator with 1m down rod with fan clamp with side plates and cross arms of size 450 mm.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (For Electronic Regulator) – SD 16

Wiring with 2x1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC Rigid pipe on concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113 mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Open PVC Plug Point. - SD 10.

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylem sheet for 15A 3 pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open Power Plug Point – SD 13

Supply and fixing of Single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals. - Sd 88.

Supply and Run of 2 of 1.5sq.mm (22/0.3) PVC inslulated Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continous earth wire connection 14SWG TC wire with painting of suitable surface SD-54.

Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 100W Bulb(SD 81)

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16")

Supplying and fixing in position best indian make white glazed earthnware WASHHAND BASIN of 560 * 406 mm with a pair of CI Brackets, 15 mm dia CP Pillar tap,32 mm GI Waste water pipe ,32 mm dia CP , Brass waste coupling,plug with chain,15 mm dia PVC connection ,15 mm GM wheel valve with ISI mark and necessary GI union and GI Elbow, including fixing wash hand basin in position with nwhite lead , clamps,teakwood plugs,screws,rubber washer etc., complete without any leakage complying with standard specifications

Supplying and fixing in positionWhite / Colour GlazedModel Floor Mounted European WaterClosetofbestqualityandapprovedmakewith 100mm“P”or“S” rap connecting with CIpipeof100mmdia/PVCpipe of110mmdia,doubleflappedrigidPVCblackseatandseat coverwith CPbrass hinges including cost of white cement, cement for packing, spunyarn, teakwoodplugs,brassscrews,etc., includingsupplyingand fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushingtankwithapairofCIbrackets, etc., completewithall fittings, complying with standard specifications

Providing&fixingPVCRAINWATERDOWNFALLPIPEofthefollowingdia withnecessaryT.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complyingwith standard specification. The rate is inclusiveofcostof removable irongratingsofappropriatesize.Thesize of TeakWoodplugsused is150X25mmin front&200x75mmin rear (wall side)withadepthof110mm.Thepipe istobefixedbymeansof "U" clampsat thecentreof pipes tobe fixed.110mmdiaPVCPipe [4 Kg/SqCm]

Supply and fixing TNEB Metre Board suitable for 3 Phases 100A service connection made up of suitable angle frame work of size 2 feet x 1.50 feet using angle iron of size 1.50x1.50x1.25 feet fixed on wall covered with hylem sheet of size 2 feet x 1.25 feet of 12mm thickness with nessary bolts and nuts supports and supply and fixing of 3 Nos 100A fues units (500 V 2 No Netural Copper earth flat of size 1"x1/4" with inter connection of EB metre to fuse units by 7/16 PVC copper wire with earth connection completed(SD 126)

Supply and fixing HDPE Sintax Tank including all labours and transports charges as per direction of departmental officers.,

Supply and fixing 2.0 HP Submersible Pump including all labours and transports charges as per direction of departmental officers.,

Supply and fixing SS Sink of size 1200 x 550 x 180mm including all labours and transports charges as per direction of departmental officers.,

Supply and fixing 8 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 24 including all labours and transports charges as per direction of departmental officers.,