Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Responsive |
Tender Value
₹10.4 L
EMD Value
₹20,750
Closing Date
22 Jun 2026, 6:00 pmClosed
Executive Engineer
Office of The Executive Engineer Ghaggar Flood Control and Drainage Division Hanumangarh
Repair of gates at Escape S 8 and Jungle clearance of Escape channel under RWSRP Sub Division 3rd Surthgarh
2026_WRDAS_567249_9
GFC_NIB_03_2026_27
Open Tender
Civil Works
Percentage
30 days
Hanumangarh
As per bid documents
3 documents required · 3 mandatory
₹1,000
Executive Engineer, GFC and Drainage Division
₹20,750
Yes
23 Jun 2026
12 Jun 2026
23 Jun 2026
12 Jun 2026
22 Jun 2026
12 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth | 1,168.4 | Cum | 137 | ₹1,60,070.8 |
| 2 | Fixing charges of new water seal including punching hole and nut bolt complete in all respect | 55.6 | per mtr | 390 | ₹21,684 |
| 3 | Removing of old water seal from canal gate, including cutting of existing nut bolts etc. complete in all respect | 55.6 | per mtr | 378 | ₹21,016.8 |
| 4 | labour charge for fixing roller and welding of lock plates, minor repair of gates for making roller in alignment including drilling new hole of appropriate size | 10 | Each | 1,209 | ₹12,090 |
| 5 | Labor charges for removing existing vertical lift canal gate and lowering of new / existing gate having weight 3 to 5 MT including ,Greasing ,oiling , cutting of accessories as per direction of engineer in charge as per specification and drawing of the department excluding the cost of rollers. | 4 | Each | 30,215 | ₹1,20,860 |
| 6 | Painting of canal gate with 2-pack Zinc chromate/phosphate primer in two coats. The dry thickness of each coat should be 35 microns and total thickness should not be less than 70 microns. And Painting of 2-pack epoxy paint in three coats of approved colour as per Engineer in-charge. confirming to IS 104 | 500 | per sqm | 325 | ₹1,62,500 |
| 7 | Supply of water seal musical hollow knot type for canal gate having size 125x12x45 mm as per IS 11855 specification. | 23.36 | per mtr | 2,086 | ₹48,728.96 |
| 8 | Supply of water seal Flat type for canal gate having size 100x12 mm as per IS 11855 specification. | 32.24 | per mtr | 1,229 | ₹39,622.96 |
| 9 | Supply of cast steel roller for canal gate of grade 200-400N as per IS 1030 specification, having size 375 mm Dia and 100 mm Thick including brass bush and 2 nos brass spacer of 10mm thick & single piece stainless steel monolithic pin complete set as per drawing and specification. | 10 | Each | 24,826 | ₹2,48,260 |
| 10 | Carriage of Bats Ballast, Kankar, Sand, Bajri, Stone, Grit, Murram, Soling Stones For Road, Water, Good Earth.
2 KM Katcha | 1,168.4 | Per cubic meter | 74.25 | ₹86,753.7 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.86 MB
FinalbidS800000.pdf
Tender Documents • 3.42 MB
BOQ_1009044.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .