CERTAIN REPAIRS TO SPL UNIT DBS ARTY BDE MAP AND MH FURNITURE UNDER GE N BIKANER

Amount

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 11.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge :

Chair dinning without arms cushioned size of 450x450x900mm/Chair dining high back with cushioned size of 450x400x 900mm(TP/Spl Unit)

S&F in replacement of unserviceable seat of chair dining as per existing pattern with 50mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 12mm commercial plywood as specified duly covered with well finished tapestry cloth of approved shade and quality as directed by Engr-in- charge/GE.

Front Legs

Rear Legs

Front/Back/Side Rail

Bottom Side/Centre Stiffener

Vertical Strips

Bend Back Support as per Drg.

Table Writing/Study Table of Size 900x600x750mm (TP/Spl Unit)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in repair sides of the table to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick .

S&F drawer to be 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick fixed with SS Channels as approved by Engr-in-Charge.

Removing of unserviceable channels in any position, S&F new SS channels with screws (ISI Marked).

Removing of unserviceable beading in any position, S&F new PVC beading 2mm thick .

Teak Wood Foot Rest of Size 65x30x900mm to be fixed with frame with Supporting MS L Brackets as approved by Enge-in-Charge.

Chair Easy (TP/Spl Unit)

Front/Rear Legs

Front/Back Rail for Seat/Back

Side Rails for Seat

Side Rails for Back

S&F in replacement of unserviceable seat of chair easy as per existing pattern with 100mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 12mm commercial plywood as specified duly covered with well finished tapestry cloth of approved shade and quality as directed by Engr-in- charge/GE.

S&F in replacement of unserviceable back of chair easy as per existing pattern with 50mm thick foam cushion of 40 density (Make : Sleepwell/ kurlon) over 12mm commercial plywood as specified duly covered with well finished tapestry cloth of approved shade and quality as directed by Engr-in- charge/GE.

Table Dinging 06 persons (TP/Spl Unit)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Fancy type long rail

Fancy type short rail

Fancy type legs

Table Centre size of 1050x525x450 mm (TP/Spl Unit)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

(b) Long Rail

(c) Short rail

(d) Legs

Table Peg 450x450x400/450 mm (TP/Spl Unit)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Front/Side Rails

Table/Studytable of Size 1200x600x750 (TP/Spl Unit)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in repair sides of the table to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick .

S&F drawer to be 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick fixed with SS Channels as approved by Engr-in-Charge.

Removing of unserviceable channels in any position, S&F new SS channels with screws (ISI Marked).

Removing of unserviceable beading in any position, S&F new PVC beading 2mm thick .

Teak Wood Foot Rest of Size 65x30x1200mm to be fixed with frame with Supporting MS L Brackets as approved by Enge-in-Charge.

REPAIR TO TABLE PEG (FD-384/277)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273, FD-376) :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

REPAIR TO TABLE WRITING (FD-275)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of Ist class hard wood (Teak wood).

Side/Bottom Rail made of Ist class hard wood (Teak wood).

Front/Back Rail made of Ist class hard wood (Teak wood).

Centre Stiffener made of Ist class hard wood (Teak wood).

S&F in repair shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick with piano type hinges/MS Hinges with approved SS knob/Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

M&L for Removing old unservicable upholstery including subsidiary items like FRC sheet, Markeen cloth, Hassian cloth, Spring, Cushion100mm thick and tapestry cloth of Sofa Sets and S&F the new approved upholstery including subsidiary items of materials like FRC sheet, Markeen cloth, Hassian cloth, New Spring and Cord, Cushion100mm thick of 40D and tapestry cloth of Sofa Sets with Melamine polish on wooden surfaces exposed to view after completion of upholstery work. Note : Colour, shade, texture, design/pattern and quality of tapestry cloth and polish shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be less than Rs. 250.00 per RM complete all as directed by Engr-in-Charge for the followings :

REPAIR TO FULLY UPHOLSTRED SOFA SET (SINGLE SEATER) (TP/Spl Unit)

REPAIR TO FULLY UPHOLSTRED SOFA SET (TWO SEATER) (TP/Spl Unit)

REPAIR TO FULLY UPHOLSTRED SOFA SET (THREE SEATER) (TP/Spl Unit)

S&F SS Legs of height 75mm as approved by Engr-in-Charge

Chair easy wooden cushion seat and back (HFD-2034)

Replacement of seat cushioned 75 mm thick of size700X500mm made of cool foam (Make : Sleepwell/ kurlon) of 40 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per Metre shade and quality shall be approved by Engr-in- charge/GE.

All as per item No 12.01 here in before but back size of 560X500mm with round shape

S&F in replacement of unserviceable front/back moulded semi-circular shape 38mm thick legs made of Ist class hard wood (Teak wood) duly plained/smoothened as per drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable moulded semi-circular 38mm thick Side Rail made of Ist class hard wood (Teak wood) duly plained/smoothened as per drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable moulded semi-circular 38mm thick U shaped backrest frame complete made of Ist class hard wood (Teak wood) duly plained/smoothened as per drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable moulded semi-circular 38mm thick U shaped Armrest frame complete made of Ist class hard wood (Teak wood) duly plained/smoothened as per drg and as directed by Engr-in-Charge.

S&F in replacement of unserviceable tapestry cloth for cushion of seat of Chair with well finished best quality tapestry cloth not less than Rs 250/- Per Metre with Zip facility shade and quality shall be approved by Engr-in- charge/GE.

S&F in replacement of unserviceable tapestry cloth for cushion of Back of Chair with well finished best quality tapestry cloth not less than Rs 250/- Per Metre with Zip facility shade and quality shall be approved by Engr-in- charge/GE.

Chair CBA Steel (Children Size) HFD-2046

S&F in replacement of unserviceable moulded polypropylene one piece seat &back of chair CBA Steel children including cushion with rexine/ cloth of chair of approved shade as specified in drawing and as directed by Engr-in-Charge.

S&F in replacement of unserviceable arms of chair with Ist Class hardwood(TW) duly covered with 15mm foam with Rexine/Cloth cloth complete and including welding of loose/broken joints of steel frame. Also painting with two coats of synthetic enamel paint of approved shade after preparation of the steel surface & providing four Nos new hard rubber shoes to each chair complete all as specified and directed.

Screen Moveable 3 Fold Steel (HFD-2015)

S&F in replacement of unserviceable green cloth and both side hooks with spring in set of three to screen movable

50mm Castors of Swivel type

Denting/bending/welding, repairs of damaged parts and complete removal of existing coat of paints filling, finishing and painting of screen movable with two coats of synthetic enamel paint of approved approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

Stool Steel (HFD - 2007)Type-I/II

S&F in replacement of unserviceable SS top of 300mm dia for Stool Steel (Type -I)

S&F in replacement of unserviceable cushioned seat of 350mm dia as per Drg and as directed by Engr-in-Chargefor Stool Steel (Type -II)

S&F in replacement of unserviceable cushioned Back rest as per Drg and as directed by Engr-in-Chargefor Stool Steel (Type -II)

S&F PVC Shoes

Denting/bending/welding, repairs of damaged parts and complete removal of existing coat of paints filling, finishing and painting of screen movable with two coats of synthetic enamel paint of approved approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

Table Bed Side ( HFD - 2005)

S&F in replacement of unserviceable Knobs with SS Knobs

S&F PVC Shoes

Denting/bending/welding, repairs of damaged parts and complete removal of existing coat of paints filling, finishing and painting of screen movable with two coats of synthetic enamel paint of approved approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

Chair Revoving /Executive/ Computer/Visitor/Chair Writing MAP with or w/o Arms(TP/Spl Unit)/(FD/E6/MAP/12)/HFD-2044/HFD-2045/HFD-2047

Labour for removing the U/S caster wheel and S & F new twin caster wheel to chair revolving/executive/Computer including welding wherever required to match with the original complete all as directed by Engr-in-Charge.

Labour for removing old height adjustment mechanism of chair revolving/executive/computer and S&F new height adjustment mechanism including greasing complete all as specified and directed by Engineer-in-Charge.

Labour for removing old broken/ damaged rod of chair revolving/executive/computer and S&F new rod all as specified and directed by Engineer-in-Charge.

Labour for removing the torned/deshaped foam leather/ cloth tapestry/Mesh for seat and back of chair revolving high back / executive and S & F new rexine/cloth tapestry/Mesh cover of approved quality to match the original complete all as specified and directed.

Labour for removing the torned/deshaped foam leather/ cloth tapestry/Mesh and cushion for seat and back of chair revolving/computer chair Med & low back/Chair Visitor and S & F new cushion and rexine/cloth tapestry/Mesh cover of approved quality to match the original complete all as specified and directed.

Labour for removing unserviceable hydraulic gas lift and S/F new hydraulic gas lift to chair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified and as directed.

Labour for removing u/s ABS of chair revolving /executive/computer /chair Med & low back and S&F new ABS of approved quality as Specified and directed by Engr-In-Charge.

Labour for removing unserviceable wheel base and S/F new wheel base of steel (including wheels) with 5 arms to chair revolving /executive/computer /chair Med & low back including welding wherever required to match the original complete all as specified anbd as directed.

S&F new moulded cushion Seat & Back for chair revolving Executive/High Back to match the original complete all as specified and directed

Labour for removing old/broken handles and S & F new handles complete in pairs for chair revolving /executive/computer /chair Med & low back to match the original complete all as specified and as directed.

REPAIR TO CHAIR VERANDAH (FD-256) :

Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane.

M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L painting of chair steel frame with two coat of synthethic enamel paint of approved shade Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding and applying a primer coat of red oxide all as directed by Engr-in-Charge.

S&F PVC Shoes

Teapoy Veandah MAP ( FD/E6/MAP/17)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F in replacement of unserviceable MS BAR 5mm dia 700mm long in Base tray of Teapoy Verandah

S&F in replacement of unserviceable MS BAR 5mm dia 400mm long in Base tray of Teapoy Verandah

S&F in replacement of unserviceable18mm Square MS pipe in Long Rail/Short Rail/Stiffener of Teapoy

S&F PVC Shoes

Denting/bending/welding, repairs of damaged parts and complete removal of existing coat of paints filling, finishing and painting of Rack Shoe Steel with two coats of synthetic enamel paint of approved approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

Rack Shoe Steel ( FD/E6/MAP/02R

S&F in replacement of unserviceable MS Rod 3mm dia 700mm long in Jali Frame of Shoe Rack

S&F in replacement of unserviceable MS Rod 3mm dia 300mm long in Jali Frame of Shoe Rack

S&F PVC Shoes

Denting/bending/welding, repairs of damaged parts and complete removal of existing coat of paints filling, finishing and painting of Rack Shoe Steel with two coats of synthetic enamel paint of approved approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

Table Writing (Steel) (900 X600 X760 mm)(TP)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) ( all-round) with screws including welding of loose joints of existing frame before fixing the top of size 900 x 600 mm to frame complete all as specified and as shown on drawing

S & F in replacement of unserviceable leg with new leg of MS 25 mm square pipe having 1.6 mm wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge .

S & F in replacement of unserviceable drawer with new drawer as per existing existing complete all as specified and as directed by the Engineer-in-Charge .

Denting/bending/rewelding Repairs of broken joints, making all drawers of table functional and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per speciaification and as shown on drg and directed by Engr-in-Charge.

Table dining Steel frame size of 1800 x 750 mm(TP)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) ( all-round) with screws including welding of loose joints of existing frame before fixing the top of size 1800x750 mm to frame complete all as specified and as shown on drawing

S & F in replacement of unserviceable leg with new leg of MS 25 mm square pipe having 1.6 mm wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge .

Denting/bending/rewelding Repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per speciaification and as shown on drg and directed by Engr-in-Charge.

Peg Table Steel(TP)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening/welding of loose joints of existing frame before fixing the top all as specified on drg and as directed by Engr -in-Charge.

Denting/bending/rewelding Repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge.

Chair Dining Steel without arms(TP)

Opening up and removal of seat, back and shoes of chair Dining steel and preparation of old painted steel surfaces frame with two coats of synthetic enamel paint of approved shade Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

S & F in replacement of unserviceable seat with new seat of size 405 x 430 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge

S & F in replacement of unserviceable back with new back of size 405 x 250 mm made of 18/19 mm thick pre-laminated MDF board(Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge

Chair Writing Steel with arms(TP)

Opening up and removal of seat, back and shoes of chair Writing steel and preparation of old painted steel surfaces frame with two coat of synthetic enamel paint of approved shade Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

S & F in replacement of unserviceable seat with new seat of size 535 x 470 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge.

S & F in replacement of unserviceable back with new back of size 470 x 250 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge.

S&F handle of chair writing of size 400 x60 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around with 4 mm dia bolt and nuts with smooth finished edging all as specified and directed by Engineer-in-charge.

Chair Easy Steel(TP)

Opening up and removal of seat, back and shoes of chair Easy steel and preparation of old painted steel surfaces frame with two coat of synthetic enamel paint of approved shade Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and refixing of seat/back if in serviceable condition. (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.) The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item.

S & F in replacement of unserviceable seat with new seat of size 575x510 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge.

S & F in replacement of unserviceable back with new back of size 480 x 300 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed by Engineer-in-charge.

S&F handle of chair easy of size 610 x60 mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around with 4 mm dia bolt and nuts with smooth finished edging all as specified and directed by Engineer-in-charge.

REPAIR TO LOCKER STEEL(DBS/Arty) FD-1029/54(M)/TP

M&L dismentling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable SS screws of approved quality complete all as specified and directed by Engr-in-charge.

M&L dismentling of existing unserviceable Hasp and Stapple and S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed by Engr-in-charge.

M&L dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding as per drg and as directed by the Engr-in-Charge.

Dismentling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint in dual shade as approved (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO ALMIRAH MED STEEL FD-1032/87M :

Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding and as directed by the Engr-in-Charge.

S&F shelves made of 1 mm thick MS sheet duly painted shape and size as specified on drg.

Dismentling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES FD-1031 :

Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild griding and as directed by the Engr-in-Charge.

S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drg.

Dismentling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

M&L dismentling of of existing unserviceable MS Butt Hinges & S&F new MS Butt Hinges with suitable MS Screws as per specification and as per drg. 75 mm long of approved pattern complete for items srl No. 28.00, 29.00 & 30.00 all as specified and directed by Engr-in-charge.

Dismentling of existing unserviceable CP handles and S&F new CP handles of approved quality in Godrej Pattern for Srl No. 28.00, 29.00 & 30.00 as specified and approved by Engr-in-Charge.

Dismentling of unserviceable locks of Almirah Med/Large with shelves/Locker Steel(TP) and S&F new locks of approved make as specified and shown in drg.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves for items Srl No. 29.00 & 30.00 complete as directed

Dismentling of unserviceable bushes of locking asembly of Srl No. 28.00, 29.00 & 30.00 and S&F new MS bushes of locking assemly as directed by Engr-in Charge.

REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)/(TP/Spl Unit)-

Removing of old unserviceable ply top from existing charpoy and S&F the new 12mm thick BWR commercial plywood with unpolished edging(ISI marked) suitable for charpoy having approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gass welding of existing frame before fixing the ply all as per drg amnd as directed. (Make of Plywood :- Green ply/Archid/Kit Ply/Century Ply.)

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint of approved shade (make Berger/AsianPaint) after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)

S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer, including removal of old unserviceable ply top complete all as per specified and directed by Engr-in-charge.

M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed.

M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 37.02 to the required size for short rail including threading at both ends complete all as specified and directed.

Removing of Old unserviceable legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 37.03 here-in-before by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.

Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.

M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed .

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed .

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) :

S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & bolts with washers without having any joints after tightening of frame by welding. make : Kit Ply/Green Ply/Century Ply/Archid Ply shape and size as per drg and as directed by Engr-in-Charge.

REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head rest to be made of 18 mm thick Ext grade MDF board of approved shade duly covered with PVC beading 2 mm thick all around (Make : Action Tesa/Novapan/Green Pannel Max) of size with suitable Screws with the cleats as specified on drg and as directed by Engineer-in-Charge.

REPAIR TO FOOT BOARD :All as per Srl item No. 38.02 but for foot board.

M&L, scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

Form without back size of 1525/1900 mm

S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality of item Srl No. 22,23,24,25,26,27 complete all as specified and as directed by the Engineer-in-Charge .

Cutting and removing old unserviceable legs and frame parts of form without back and supply and fixing the new legs and form parts made of MS 25 mm square pipe having 1.6 mm wall thickness by welding and including minor repair as per existing complete all as specified as directed by the Engineer-in-Charge. . Note:- (i) Cost of minor repair like welding to frame if required etc shall deemed to be included in the quoted rates. (ii) Cost of nuts, bolts and washers if required for fixing shall deemed to be included in the quoted rate. (iii) All work to be carriedout as specified and as shown on drawing and directed by Engineer-in-Charge.

Denting/bending/rewelding Repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as directed by Engr-in-Charge.

S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality of item Srl No. 22,23,24,25,26,27 complete all as specified and as directed by the Engineer-in-Charge .

S&F Wooden Corner Brackets of size 50x50x20mm in Item Sr No 2.00,7.00, 6.00 & 9.00

S&F Wooden Corner Brackets of size 50x50x20mm in Item Sr No 2.00,7.00, 6.00 & 9.00

S&F Wooden Corner Brackets of size 75x75x30mm in Item Sr No 11.00 & 12.00

S&F Wooden Corner Brackets of size 100x100x35mm in Item Sr No 5.00 & 10.00

S&F Steel L shaped Corner Brackets of size 50x50X30mm of thickness 3mm in Item Sr No 3.00 & 8.00

M&L for cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)

Table writing FD - 33/275

Peg table FD - 25/277

Table centre FD-214/274

Sofa set 5 seater FD - 281/373/258

Table dining 6 pers FD-30/239/273

Teapoy Wooden FD - 382

Chair dinning without arms cushioned size of 450x450x900mm/Chair dining high back with cushioned size of 450x400x 900mm(TP/Spl Unit)

Table Writing/Study Table of Size 900x600x750mm (TP/Spl Unit)

Chair Easy (TP/Spl Unit)

Table Dinging 06 persons (TP/Spl Unit)

Table Centre size of 1050x525x450 mm (TP/Spl Unit)

Table Peg 450x450x400/450 mm (TP/Spl Unit)

Table/Studytable of Size 1200x600x750 (TP/Spl Unit)

Chair easy wooden cushion seat and back (HFD-2034)

Double Bed (TP/Spl/Unit)

SMS Enterprises

Khatri Trunk Factory