Zila sahakari bank ltd. raebareli sabhagar me marrmat va rangai putai ka karya

Amount

Repaires of plaster of thickness 12 to 20 mm in patches of area 2.50 sqm and under including cutting the patch in proper shape raking cut joints and preparing and plastering the surface of the walls complete Including disposal of rubbish to dumping ground. All complete as per direction of Engineer -in charge .DAR 4.1.2 and page 31

Scraphing White wash / colour wash two coat over one cement primer base coat. i/c cost of all matereial labour T&P etc

Dismentling of door Window shutter complete in all

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws UPPWD SOR Ch. 11, 9.21.1

Providing & Laying Polished Vitrified Floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:4 (1cement : 4 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.Size 600*600 mm. DAR 11.41.2 And shedule page No. 27

Providing & Laying Polished Vitrified skirting tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than n 0.08% and conforming IS 15622 of approved make in all Colours and shades, laid on 20mm. Thick 1:3 (1cement : 3 Coarse sand) Including grouting the joints with white cement and matching pigment etc. Complete.Size 600*600 mm.DAR 11.46.2 And shedule page No. 27

Cement concrete flooring 1:2:4 ( 1 cement, 2 coarse sand, 4 Graded stone Aggregate ) finished with a floating coat of neat cement including cement sullry , but excluding the Cost of noising of steps of complete . 40 mm thick with 20 mm nominal size stone Aggregate. DAR 11.3.1 and page No.26

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (PWD SOR Ch. 15 DAR No. 13.80)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work (Royal silk) Asian, Berger. PWD SOR SI 13.60.1

Painting with plastic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work (Royal silk) Asian, Berger. PWD SOR SI 13.60.1

Class M-150 brick work in 1:6 cement & Coarse sand mortar In foundation & plinth including supply of all materials,labour & T & P etc required for proper completion of the work. DAR 6.1.1

Wall writing painting I/C all complete.

S/F of 110mm PVC pipe dia 6kg. Presser I.S.I mark Lucknow SOR Chapter 1 ITEM No. 17 (31)

Float glass panes of normal thickness 5 mm (weight not less than 12.50 kg/m ) DAR 14.6.2 AND Shedule page No 31

S/F of Urinal pot 465x355x265mm DAR 17.4.1

S/F of Comboard western style in all complete As per Market rate

S/F of wash hand besin 550x400 DAR 17.7.3

S/F of 50mm dia CI vent pipe

S/F of 100x75mm Nahani trap

S/F of 25mm PVC pipe

P/F of blade curtain for windows and cabin (Market rate for estimate only)

Providing and fixing alluminium work for door , window , ventilation and partition with extruded built up standard tubular section approvte Z section and other sections of approved make conferming to IS 733 and IS 1285 fixing with dash fastners and required dia and size including necessary filling up to gap as Junction i.e. at top bottom and side with requred EPDM rubber coprensc Gussets etc. alluminium section shall be smooth rust free . Straight methoud and jointed mechanicaly , achive required including coat angle alluminium snap bording of glazing painting C.P. brass star screw at complete as per attachedment Drawing and the Direction of Engineer in charge (Glazing panaling and dash fastners to be paid separatelly ).DAR 21.1.1 and shedule page No 39

Mislanious work .

ELECTRICAL WORK

Wriing point for light with 1.50 sq. Mm FR PVC insulated maltistanded single core cooper conductor cable in heavy gauge as per SI No. 138 c

Wriing point for Fan with 1.50 sq. Mm FR PVC insulated maltistanded single core cooper conductor cable in heavy gauge as per SI No. 140 c

Wriing point for plug 5 AMP. With 1.50 sq. Mm FR PVC insulated maltistanded single core cooper conductor cable in heavy gauge as per SI No. 141 c

Wriing point for plug with 155 AMP./250 volt flush tipe modular switch and 5 pin 20 A/250 volt flush universal socket in sutable MS box of 150x100x50 mm size with phinomic laminated bakelite sheet cover 3mm thick fixed with bross mzchine screw and cup washer as per SI No. 1139

S/w of sub man with 20mm dia heavy duty (2mm thick) PVC conduit with 1 nos 2.5 sqm mm multistand copper conductor cable as earth continuty wire drown condut complete in all respect SI No. 211 c

Erection & testing of celling fan & regulator etc. excluding S/o down rod complete all

S/F of 18 watt. Single CFL complete in all respect

S/F of batton/ angle holder complete in all respect SI No. 405

Supply of ceiling Fan with Fan motor of AC permanent insulation capacitor rating confirmig BEE 5 star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1-ph, AC the Fan assemble should consits of down rod blades, shackle canopies etc with double ball bearing system. (i) BEE 5 star rated - 1200 mm sweep.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA SINO 1413

Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.a) 600x480x200 mm. size SINO 141 B

Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work.a) 600x480x200 mm. size SINO 1147

Supply and fixing of flush/surface mounting distribution boards complete in all respects.8 Way TPN SINO 1028

Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps. SINO 1002

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 63 Amp. 4 Pole MCB SINO 1020 (A)

Supply and wiring of submain 4 number 16 sqmm FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 4x16 sqmm SINO 291

S/F of 4.00 sqmm wire for AC And Unforceen Acivity in Bank and all work Done by Agecy.

M/s Naina Construction (BID ID -4884342)

M/S AARADHYA AND ADHYATM ASSOCIATES (BID ID -4885616)