CONSTRUCTION OF SWIMMING POOL AS OLYMPIC STANDARD IN BARAMATI CITY (PHASE-2) TALUKA BARAMATI, DISTRICT PUNE.

Amount

Supply, Installation, Testing and Commissioining of Verticle Type FRP Boobin Wound Pressure Sand Filter, Totally anticorrosive filte rof 2000 mm dia., Manufactured with fiber glass & polyster resin, fitted with collector arms & diffuser made from unplastisized PVC & polypropelene, capable of accomodating a flow rate of 125 cum / Hour, Velocity of Filter: 40 cum / Hour / Sqm. Filter Bed Depth 1.0 mtr., Inlet Outlet Connection Size: 140 /160 mm, complete with lid in polyester resin & fiber glass, manual air purge, cap for sand discharge & PVC flanged connection for inlet & outlet. Make- Aqvastar/AstralPool/ Waterco

Supply, Installation, Testing and Commissioining of of 5-Valve batteries built entirely in UPVC with flange connections to filters according to DIN standards. Butterfly valves also in uPVC PN-10 Rated. with Required PVC Fittings such as Equal Tee, Elbow , Stub End and Flanges of PN-10 Rated, supports made of zinc coated steel pipe with antivibration clamps & fixing plugs, Conn.140 mm /160 mm dia. Make- Aqvastar/AstralPool/ Waterco

Supply, Installation, Testing and Commissioining of Single stage/Horizontal Plastic pumps set with inbuilt prefilter,Thermoplastic injected pump casing. Impeller in Brass or noryl with Stainless steel shaft, mechanical seal in stainless steel connected to TEFC induction motor with built-in thermal protection and automatic reset suitable for 190/ 380 volts, 10 HP, 3 phase, 50 cycles A.C supply, IP-55 motor protection complete with inbuilt Filter basket in injected plastic material, Flow 125 m3/hr. @ 12-14 Mtrs. Head (Working 2 Nos. , Standby : 1 No.) Make- Aqvastar/AstralPool/ Waterco

Supply, Install, Testing & commissioning uPVC Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as specified and directed. 90 mm Dia. x 10 Kg/cm2 Make Prince / Finolex / equivalent

Supply, Install, Testing & commissioning uPVC Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as specified and directed. 110 mm Dia. x 10 Kg/cm2 Make Prince / Finolex / equivalent

Supply, Install, Testing & commissioning uPVC Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as specified and directed. 160 mm Dia. x 10 Kg/cm2 Make Prince / Finolex / equivalent

Supply, Install, Testing & commissioning uPVC Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples, Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as specified and directed. 200 mm Dia. x 10 Kg/cm2 Make Prince / Finolex / equivalent

Supply, Install, Testing & commissioning of PN-10 Rated 200 mm dia. UPVC Suction valve (Butterfly Type) Complete with uPVC stud ends, uPVC flanges, Platted Nut bolts and washers. (For Pump Suction- 3 Nos., For Pool Inlet -1 No.) Make- Aqvastar/Cepex/Pimtas

Supply, Install, Testing & commissioning of PN-10 Rated 160 mm dia. UPVC Suction valve (Butterfly Type) Complete with uPVC stud ends, uPVC flanges, Platted Nut bolts and washers. (For Pump Delivery - 3 Nos., For Pool Drain -1 No.) Make- Aqvastar/Cepex/Pimtas

Supply, Install, Testing & commissioning of PN-10 Rated 160 mm dia. UPVC Check valve (Wafer Type) Complete with uPVC stud ends, uPVC flanges, Platted Nut bolts and washers. (For Pump Delivery- 3 Nos.) Make- Aqvastar/Cepex/Pimtas

S/I/T/C of PN-10 Rated 160 mm dia. UPVC Foot valve (Ball Type) Complete with uPVC stud ends, uPVC flanges, Platted Nut bolts and washers. (For Pump Suction - 3 Nos.) Make- Aqvastar/Cepex/Pimtas

S/I/T/C of VGBA Approved Drain grating in ABS Plastic , Frame in injected moulded plastic, Size of Grill - 450mm x 450mm. Make- Aqvastar/Pentair/Aqua

Supply and Installation of S.S.304 Ladder (4 Step) SS ladder with polished stainless steel hollow pipe of 43mm Dia. and of 14 gauge(1.6mm) thick, Anti-slip stainless steel steps with anchoring fixtures. Make- Make- Aqvastar/Pentair/Aqua

Supply and Installation of Starting Blocks with mounting frames and foundation bolts - The starting block is manufactured using AISI-304 painted with epoxy resins or polished and dip of plate size 500 x 500 mm. x 700 mm height. high density polyethylene with no-slip machining Top platform, adjustablem Angle of diving platform surface max 10°. Double handle horizontal and vertical for backstroke start. The starting block is provided to numbers standard in 4 sides. Made in according with FINA regulation in force. Make- Aqvastar/AstralPool/ Waterco

Supply and Installation of Float lane - 50 mtrs. long x 100 mm Dia. anti wave breaker lane ropes made made in polyethylene with anti-acid and anti UVA treatments with special feature for eliminate wave movement. Complete with spring tensioner all in stainless steel 316L and cover in silicon, in according with EN 13451-5 and FINA regulation in force. Suitable for high level competitions including SS 316L float line fixing post anchored on the deck. Make- Aqvastar/AstralPool/ Waterco

Supply and Demonstration of Metallic vacuum head in Anodised Aluminium, 800 mm Long, connection external 2” to fit hoses, fork in Stainless Steel. for connection. Make- Aqvastar/AstralPool/ Waterco

Supply and Demonstration of Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf skimmers and scoops, 9 feet to 27 feet. Long. Make- Aqvastar/AstralPool/ Waterco

Supply and Demonstration of Transparent plastic vacuum hose 2” dia 30 mtrs. long including hose cuffs for connection to suction inlets. Make- Aqvastar/AstralPool/ Waterco

Supply and Demonstration of Algae brushes with stainless steel bristles. Make- Aqvastar/AstralPool/ Waterco

S/I/T/C of Automatic pH Correction system comprise of an automatic proportional dosing system combining controller, electrical box and hydraulic by-pass probe holder in a single ready-to install unit. IP65 enclosures protect against water jets, Should Include two washable cartridge filters. 100 ltrs. Capacity PVC tank and PVC stirrer. Make- Aqvastar/AstralPool/ Waterco

Supply of Float Lane Storage designed to transport and store the Float Line after use in the swimming pool. Easy to use and aesthetically discreet. The float line roller is manufactured using AISI-304 Stainless Steel The cart has four rotating wheels for maximum mobility. Two of these have a brake. Suitable for Storage of 1 No. of 50 mtrs. long x 100 mm Dia. Float lane. Make- Aqvastar/AstralPool/ Waterco

Supply and Installation of BACK STROKE TURN INDICATOR POST - comprising of 2 no stainless steel SS 316L posts each of 48 mm dia and 1.8 m height provided on either side of the racing pool properly anchored in a suitable anchoring socket on the deck at specified location and shall span across the sides including set of flags as per specifications as per FINA. Make- Aqvastar/AstralPool/ Waterco

Supply and Installation of FALSE START INDICATOR POST- comprising of 2 nos. stainless steel 316L posts each of 48 mm dia and 1.8 m height provided on either side of the racing pool properly anchored in a suitable anchoring socket on the deck at specified location including one post provided with pulley and quick cord fixing and loosening device and including false start line comprising of polyester cord and a float. as per FINA. Make- Aqvastar/AstralPool/ Waterco

Providing and laying Petit Carre Porcelain Finger Grip Tile with Safety Marking of siz 245 mm x 120 mm and thickness 18 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like Cobalt etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 3-4 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge. Make- Serapool/ Agrob Buchtal/Endura

Providing and laying Porcelain Petit Carre Antislip Tile with of size 245 mm x 120 mm and thickness 6.8 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like unglazed etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge. Make- Serapool/ Agrob Buchtal/Endura

Providing and laying Porcelain Petit Carre Bevelled Edge Antislip Tile with of size 245 mm x 120 mm and thickness 6.8 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface of Rest Ledge in swimming pool of approved manufacturer and of shade approved by architect or engineer in charge like unglazed etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive ( Bal Endura gold star / latecrete / Rock force ) in conjuction with polymer modified liquid Bal Endura admix Adlor equivalent product of latercrete / Rock force mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of Bal Endura Epoxy grout / Latecrete / Rock force with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge. Make- Serapool/ Agrob Buchtal/Endura

S A M ENTERPRISES (BID ID -7143958)

AMEZ SPORTS (BID ID -7144415)