PROVN OF STORAGE SHELTER AND STORE ROOM AT RVC CENTRE COLLEGE AND 03 X WT AC 1.5 TON FOR BLDG NO P 07 AT CMVL AND SPL REPAIR TO SECURITY WALL AROUND TRG GROUND AND ADDN ALT TO BLDG NO E 58 60B TOILET BLOCK OF 416 ENGR BDG CAMP UNDER AGE BR II AND

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

Removing excavated material ( spoil ) exceeding 50 m & not exc 100 distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

Removing excavated material ( spoil ) exceeding 250 m & not exc 500m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in cills, copings, kneelers, bed plates, kerbs hold fast, fillings in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) louvres and jallies, 40 mm thick (measured solid), including necessary reinforement wire and all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggrigate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

All as per Srl item No 19 here-in-before but except bricks

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F mild steel work as for Hand rails, half round or other stock section , nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) . including necessary riveting and / or welding and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note : Each line wie to be measured

S&F 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, round headed screws, and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded clout nails or rivets including bending or turning up, mitred angles, etc. as required. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 31 here-in-before but 6mm to 8mm dia

All as per Srl item No 31 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F factory made steel windows / ventilator with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for preparing ,cleaning new concrete/ plastered surface and applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M&L for 20-25 mm thick machine cut kota stone slabs of size 540 mm x 540mm to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the existing surface including rubbing and polishing & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per Srl item No 39 here-in-before but on vertical surface over & including 10mm thick backing coat in CM 1:4

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in plinth courses, copings, kneelers, apex stones, padastal etc with and including necessary use and waste of form work (straight or curved) complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- water proofing compound will be measured and paid seperately.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

-------BLANK---------

M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces over a coat of primer complete all as specified and direcrted.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying two coats of cement base paint, complete all as specified and directed

M&L for applying two coats of exterior paint acrylic emulsion over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and directed. Make :- Apex Ultima (Asian paints / Excel /Nerolac) / weather shield (ICI paints).

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L for construction of Soakage wells, excavated in ordinary soil foundation PCC 1:3:6 walls of honey combed and solid brick in CM RCC cover slab in M-25 design mix, filling work with brick bats complete of size 2.4 m dia x 6.00m deep (effective depth 4.5m) as directed by directed by Engr-in-Charge. Drg No Ref TDj HQ CEBZ Drg No TD/309 sheet 1/4, 2/4, 3/4 & 4/4

Construction of septic tank for 100 users with sludge chamber including necessary earth work and RCC cover slab in M-25 Design mix complete all as specified and shown on drg No TD-217 sheet 1/7 to 7/7 and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor cable in and including rigid non metallic PVC concealed conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 1.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a) One light/ fan/ exhaust fan/ bell/ buzzer point controlled by one, one way switches 5/6 Amps.

All as per Srl item No 64 here-in-before but One 3 pin 5/6 amps socket out let point on same board, controlled by one, one way 5/6 amps

All as per Srl item No 64 here-in-before bu One 3 pin 5/6 amps socket out let point on independent board, controlled by one, one way 5/6 amps

M&L for point wiring with 2.5 Sq mm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor cable in and including rigid non metallic PVC concealed conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, concealed in wall including earth wire continuous of PVC insulated, unsheathed 2.5 Sq mm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed .

M&L switch Piano, flush type, ivory finish 5/6 Amps, single pole, one way complete all as specified and directed.

S&F socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type ivory finish complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 amp, flush type, ivory finish complete all as specified and directed.

S&F switch Piano flush type, ivory finish 15/16 Amps, single pole, one way complete all as specified and directed.

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

Supply and fixing lamp holder PVC body suitable for batten fitting including 01 No LED bulb 18 watt complete all as specified and directed.

Supply & Fixing LED Security light 25 W, aesthetically designed, complete with all accessories with GI pipe mounting bracket of suitable size and dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps as required, complete all as specified and directed.

S&F LED tube light fitting,22W, LED batten T-5 in extruded aluminium housing with diffuser etc. and all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F single pole and neutral DBs, 8 way, 240 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole, complete all as specified and directed.

Supply and fixing isolator DP, 40A suitable for mounting in DB, complete all as specified and directed.

Miniature circuit breaker single pole with thermal over load as well as magnetic short circuit tripping device suitable for single phase circuit of 240 Volts and 6 to 32 Amps current rating ‘C’ series, 10 KA complete all as specified & directed.

M&L for laying,testing cable XLPE insulated, screened, PVC bedded, galvanized strip or wire armoured, electric power cable 1100V grade with aluminium conductor of size 16 sqmm, 4 core, complete all as specified & directed.

S&F propeller type AC ventilating fans 230 Volts, 300 mm sweep (Exhaust fan) metallic body with louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

-------BLANK---------

-------BLANK---------

-------BLANK---------

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct or inside the premises of transformer yard complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and as directed.

Supply and installation of window type AC 1.5 Ton Capacity 230 volts AC single phase 50 HZ BEE 5 star rated compelte all as specified and directed. Make : Voltas / LG / Samsung

M&L for sub main wiring with two single core, 6 Sqmm PVC unsheathed stranded copper conductor cable in and including PVC concealed / surface conduit, 25mm or higher dia, ISI marked, medium grade complete with all PVC conduit accessories / fittings including earth wire with 6 Sq mm single core PVC insulated, unsheathed copper cable fixed along with the sub main in PVC condit and connecting to earth dolly with all fixing material complete all as specified and directed

S&F sheet metal single pole and enclosure with 2 pin plug and socket 240 volts with one single pole MCB 20 Amps complete all as specified and directed

Supply and fix automatic electronic voltage stabilzer of capacity 5.0 KVA having feature such as intelligent time delay system, low and high voltage cut-off protection latest IC technology to protect from power fluctuations, thermal over load protection, wide input variation between 170V to 250V with output voltage stabilized at 220 to 240 V with accuracy of of +/- 2.5% Make : V Guard / Microtek / Blue Star

Jay Ambay Enterprises

Rajneesh Jain

Manglam Engineers and Construction Co

BASANT ENTERPRISES

M/S AMAR ELEKTRO CENTRE

SHRI BALAJI ENTERPRISES