REPAIR MAINTENANCE OF JOINERY PLASTERING FLOORING PUMBING SANITARY FITTINGS AND OTHER MISC WORK IN JCO ORS MD ACCN AT MALCOM LINE OF AGE BR I AREA UNDER GE MIS MHOW

Amount

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down shuters of any description n.exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sq. m each and refixing in the same opening after easing and adjusting etc complete all as specified.

Taking down existing aluminium Door/window shutters of any size and carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. Note Aluminium frame,Wire mesh and glass as required shall be measured and paid separately under relevant items.

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partition, with one or more rebates sections of approved tint including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc including taking down of exiting frame complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as specified in SSR 2020 complete

S&F 35mm thick factory made second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.Note: Glass and wire mesh shall be mesured and paid separately

S & F 30 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.Note: Glass and wire mesh shall be mesured and paid separately

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

M&L for cutting holes in brick/block walls built in in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick n.exc one brick complete as specified.

S&F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, hold fasts, wall ties hooks for hanging fans, plain angle etc all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long

S&F in repairs aluminium anodised barrel tower bolts of extruded section 150 mm long

S&F aluminum anodised alloy handle 150 mm cast type

S&F in repairs aluminum anodised alloy handle 150 mm cast type

S & F stainless steel butt hinges 100 mm long..

S&F Butt hinges, medium weight,cold rolled mild steel, 100mm size

S&F Butt hinges, medium weight,cold rolled mild steel, 75mm size

S&F in repairs Butt hinges, medium weight,cold rolled mild steel, 100mm size

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Hacking out old broken glass ( any thickness ) size or description from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

All as per item No. 31 above but for figured glass pin headed type.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

S&F in repairs mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

S & F in repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over coat of pink primer all as specified and directed.

M&L for preparation of new steel & iron surface of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of primer all as specified and directed.

S&F in repairs18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified.

S&F in repairs 18/19mm veneered particle boards interior grade,solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished

S&F Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size

S&F in repairs Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement ,mixed with liquid WPC complete all as specified. Note :- Water proofing compound shall be measured and paid separately

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified.

M&L for preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted.

M&L for preparation of new wall surface of and applying three coat of white wash complete all as specified and as directed

M&L for applying three coats of white wash on new ceiling,chajja surface including preparation of surface.

M&L for preparation of new plastered surface and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed .

M & L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coats of oil bound distemper complete as directed and specified.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for prepararion of old decorated surfaces of ceiling by brooming down, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered and unplastered surfaces and applying one coat of white wash complete.

M&L for preparation of old wood or wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size, 6 to 7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in coloured cement to match with colour of tile complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dados 450X300X7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 18-20 mm thick Black shade granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish using by mechanical grinder and moulding edges complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 80 mm thick rubber moulded machine pressed precast concrete interlocking paver block (glossy finish) of M40 Grade of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment complete all as specified and as directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick

M&L for rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed.

Taking down steel tubing 15mm bore and connections complete all as specified

Taking down steel tubing 20mm bore and connection complete all as specified

S&F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

M&L for cutting chases not exc 10cm girth in brick walls, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good the disturbed surface as per existing complete all as specified.

M&L for dismantling water tanks and removing to store of capacity exc 250 & n exc 500 litres complete all as specified & directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity three layered (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms ) complete all as specified & directed.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms ) complete all as specified & directed.

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe, lime concrete bedding, 'P' or 'S' trap complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. Make :Plumber/Essco of jaguar(Economical Range)

S&F in repairs 32mm dia PVC waste pipe fixed to WHB,sink,urinal complete all as specified and directed.

S&F 15mm bore pillar taps,half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair 15mm bore pillar taps,half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. Make:Plumber/Essco of jaguar(Economical Range).

S&F in repair CP brass fancy type 15mm bore bib taps,half turn screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm all as specified

S&F in repairs CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repairs Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete.

S&F in repair gun metal gate valves 15 mm with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs CP brass fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S&F in repair over head tank cover suitable for tank of 500 to 1000 litres capacity all as specified and directed

S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

M&L for stainless steel plate rack 1 mm thick for kitchen of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack shall not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg.

S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long all as spd.

S&F in repairs of 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 45gms ) for kitchen sink complete all as specified and directed.

S&F in repairs 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc.

S&F in repair grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel curtain rod as approved by GE complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel decorative brackets with arrangements as approved by GE complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified.

S&F in repairs PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified.

S&F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair PVC (SWR) pipe, 90 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Dismantling of Asbestos cement (corrugated, semicorrugated) sheets in roof coverings complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

M&L for cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall including necessary coping with concrete 1:2:4 type B1 over the sheet along the wall all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Mild Steel for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

M&L for Walling of random rubble,uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified and directed .

Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided forcomplete.

M&L for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 using 12.5mm graded stone aggregate as in required slope, average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or other equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying first coats of Dr fixit fastflex with a stiff nylon brush and leave 4 to 6 hours for dry. (d) Applying second coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the first coat) and leave 4 to 6 hours for dry. (e) Applying third coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the second coat) and leave 4 to 6 hours for dry. Note: (a)WPT Shall be done through approved applicator certified by Manufacturer (b)Liquid WPC shall be measured & paid seperately under relevant item.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate mixed with WPC as in levelling course for floor etc complete all as specified and directed.

M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded aggregate as in filling of sunken portion complete all as specified and directed.

S&F in repairs 40mm dia GI tubing medium grade as in spout pipe , including cutting in any length as required and fixed to wall & floor etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase etc.complete all as specified.

M&L for 50mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in copings, kneelers, apex stones,bed plates, kerbs,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work all as directed

M&L for Running welding in repairs thickness of metal to be welded exc 9mm n.exc 20mm complete.

S&F in repairs18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item no 138 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item no 138 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

S&F in repairs brass spindles for bib tap and angle cock etc (as per approved sample ) complete all as specified

S&F in repairs Brass spindle for WHB mixer and Wall Mixer and concealed stop cock (as per approved sample) complete all as specified

S&F in repair second class hard wood beads , straight ,of size n.exc 25sqcm ) for glazed or gauzed joinery , renewed including mitres etc for beading for wiremesh door.

S&F in repair PVC float set for internal flushng system fitting in side for low levelling PVC cistern Complete all as specified & directed

S&F in repair of good quality rubber washers for low level flushing cistern complete all as directed.

S&F in repair PVC flush handle for low level flushing cistern complete

S&F in repair rubber washers for pillar taps,bib taps etc.or valve sizes 15mm/20mm

S&F in repair Flush pipe 32mm dia of polyethylene of low or high density for low level cistern

S & F jet sprey for pedestal pattern water closet including flexible pipe and Brass Chromium Plated nuts.complete.

M/s Himgiri construction

M/S Sunshine Construction

M/S DADISA CONSTRUCTION