Construction of Moamoria Gana Bidruhor Smarak, ( Memorials of Moamoria Rebellion) at Mohanbari, Near Airport, Dibrugarh

Amount

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5Km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) )

Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footings, bases of columns, etcfor mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.

Providind and laying in position ready mixed or site batched design mix cemet concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recoomended proportions as per IS: 9130 to accelerate/retard setting of strength; including pumping of concrete to site of laying, curing, concrete, to improve durability and workability without impairing carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note : Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete ofM20 grade with minimum cement content of 270 Kg/cum

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement :4 coarse sand) sqm

Steel work welded in build up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying machine cut, mirror polished Marble stone flooring in reqired design ( Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc. in linear portions of the building, all complete as per the architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curring and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18mm thick Italian Marble stone slab, Periato, Rosso verona, Fire Red or Dark Emperadore etc.

Boundary wall (73.00m) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete with common burst clay F.P.S. bricks of class designation 7.5

1:3:6 (1 cement : 3 coarse sand (zone III) derived from natural concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA) )

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

R.C.C work (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hard drawn steel wire

Half brick masonry with common burnt clay F.P.S. bricks of class designation 7.5 on superstructure above plinth Cement mortar 1:4

cement plaster in coarse sand (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

10 Full figure statues (Size +12 feet Height):- a)Modeling Materials (Special Modeling Clay). b)Wooden plate. Iron Armature, Bamboo etc. c)Materials for mold making (Plaster of Paris,coconut mat) d)Latex Resin, silicon, rubber. e)Casting materials (fiber resin , Glass mat, Hardener, Exciletor, Waxpol, Jolcot, france chock, etc) f)Remuneration Helper g)Asstt. Artist, Castor, Technician h)Colors white material i)Artist j)Fitting Carrying site visit.

KUSUMBAR GOGOI

SRI BISHNU CHETRY