PROVN OF TOILET BLOCK FOR ATTENDENCE GAURDS AT PSY WARD AND SPL REPAIR TO BLDG No P6 Adm Block OF MH DANAPUR IN AGE BR II UNDER GE DANAPUR CANTT

Amount

Boring holes 3m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 50 m but not exc. 25 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for plain cement concrete, 1:4:8 type D-2 Nominal Mix (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed..

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L for 40 mm thick Damp proof cource in cement concrete 1:2:4 type B-0 to horizontal or vertical surface incl necessary form work concrete complete all as specified and directed. .

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&Lfor providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 21.00 above but in CM 1:4 for manholes, drains, etc complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for cutting openings of brick wall built in cement mortar or cement lime mortar, through brick wall for door, window and other openings or enlarging existing openings, converting window into door opening, etc or cutting out defective brick work for under pinning, including removing rubbish from site and all as directed by Engr-in-Charge.

M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge.

M/L for 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking plateform.

Demolition of reinforced cement concrete of any description and any position and removing the rubish from the work site complete all as specified and directed.

M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of PVC pipe 110mm dia after they are laid and tested complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in man hole cover slabs and set in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premisses complete all as specified and directed.

M&L for 10mm thick light shade vitrified ceramic tiles double charged in floors n. exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed.

M&L for 10mm thick Dark shade vitrified ceramic tiles double charged in floors, n. exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified & directed.

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

M & L for 450x300 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.

M & L for two coats of OBD over a coat of primer on newly plaster wall surfaces incl applying with 3 mm thick Birla / JK Putty of surfaces complete all as specified and directed.

M&L for applying two coats of white wash on newly concrete surfaces on ceiling complete all as specified and directed.

M&L two coats of cement base paint over and including a coat primer on wall including preparation of newly plastered surfaces.

M&L for two coats of weather proof paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

All as per above item No 44.00 but exc 1.5 Sqm but n.exc. 4 Sqm each.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by GE..

M&L in repair 18-19 mm thick MDF Board exterior grade pre laminated one side with decorative choice and other side balancing white lamination fixed with screws as in cupboard and cupboard shutters including leaping/beading duly polished all as specified

S&F L type hinges (Bihari Hinges) of stainless steel all as specified

S & F 100 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11 complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S & F brass barrel tower bolts of extruded section natural shade with mat finish 150 mm long complete all as specified and directed.

S & F Aluminium handles of extruded section, fabricated type and fixed 125 mm long complete all as specified and directed.

S & F brass handles of extruded section, fabricated type natural shade with mat finish and fixed 150 mm long complete all as specified and directed.

S&F Aluminium alloy sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing bolt with of extruded sections complete all as specified and directed.

S&F brass sliding door bolt 300 mm long withdie cast hasp, staple (bolt type) and fixing bolt with drawn brass bolt complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F in repair 4 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.

S&F magnet catches fixed with steel screws in cabinet brass body complete all as specified and directed.

Dismantling of false ceiling of any description, any thicknes including cover fillets and frame work complete all as specified and directed by the Engr-n-Charge

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed .

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L ceiling board of sound absorbing of size 60 x 60 cms, 9 mm thick of ARMSTRONG or any other make specified in Particular Specification coloured with perforations complete all as per manufacturer instructions and as directed by Engr-in-Charge.

S & F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters upto 700mm in width and of weight n. exc 35 kg etc complete all as specified and directed.

S & F floor door stopper 140 mm overall length of cover plate of brass body and tongue, With hard drawn spring, fixed in floor. complete all as specified and directed

S & F powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Bottom rail of size 100x 44.45x 1.18 mm @ 1.69 Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 6 mm thick Aluminium composite panel (ACP) with glazing clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, powder coated aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading screws etc complete all as specified and as directed.

S&F 25 micron reflective type sticked to glass panes as per manufacturers instruction all as specified.

S&F in repairs powder coating aluminum partition wall of aluminum section 100mm x 44mm x 2mm thick frame rectangular section and panel of PVC sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminum beading around length including necessary fixing arrangement for bottom and top member of aluminum frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : Cost of PVC panel or prelaminated board and sheet glass shall deemed included in the unit rate of this item )

M & L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S & F 5.5 mm thick Sheet glass ordinary quality fixed with rubber gasket and powder coated aluminium beading to aluminium frame exc 0.5 Sq. M in each pane complete all as specified and directed.

S & F 4 mm thick Sheet glass ordinary quality fixed with rubber gasket and powder coated aluminium beading to aluminium frame not exc 0.5 Sq. M in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed.

Taking up 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

Taking up 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed.

S & F tubes medium grade galvanised iron with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed.

S & F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed.

Dismantling of PVC water tanks of 500 ltrs capacity including all fittings such as nipple, float valve etc complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 15mm-142gms) complete all as specified and directed

S&F 15 mm dia nipple suitable for HDPE water tank (min weight 38 gms) complete all as specified and directed

S&F 20 mm dia nipple suitable for HDPE water tank (min weight 45gms) complete all as specified and directed

S&F Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed .

S&F in repair Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed .

S&F Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

Taking down WC Orrissa pattern, EWC, WHB, PVC Cistern of any type and capacity complete all as specified and directed.

S&F 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair vitreous China white urinal flat back (Long) 600 to 680mm x 400mm to 420mm x 375 to 380mm with 32mm dia CP casted bottle trap, 32mm dia brass CP dome waste, 32mm dia brass CP spreader union for dishcarge pipe 32mm complete with necessary fittings. Make - Prayag/Jaquar/Parryware/Essess

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) etc complete all as specified and directed by EIC

S&F PVC (SWR) 'P' or S trap for 110 mm dia etc complete all as specified and directed.

S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed.

S&F pillar tap cast copper alloy fency type with capastan head chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repair chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and directed.

S&F in repairs CP bottle trap (heavy) 32mm. Make: Hindware/Parryware/ Cera/ Essess

S&F 32mm waste Coupling brass, chromium plated for glazed ware sinks, basins,etc. With long screwed shanks and fly nuts,flange end bedded in red lead cement and other end.

S & F bib tap 15mm chromium plated with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the Engineer-in-Charge.

S & F in repair bib tap 15mm chromium plated fency type with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the Engineer-in-Charge.

S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F PVC connection 15mm dia size and 600 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F 40 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to WHB and Sink with required solvent etc complete all as specified and directed.

S&F chromium plated soap dish of any type fixed to wall with screw complete all as specified

M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base of floorings of tiles complete all as specified and directed

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L for durastone heavy duty coloured vitrified tiles 300x300x9-10 mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match complete all as specified.

M&L for tubular roof trusses MS Pipe medium grade cut to length and fixed to walls for tubular roof trusses (framed), trussed, purlins, suspended false ceiling, etc complete all as specified and directed by Engr-in-charge.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle bracket, cleat and other connection conforming to Fe-410-W (Grade E-250) 'A' quality complete all as specified and as directed by Engr-in-Charge.

S&F wall corner with all fittings complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar/Cera/Essess

S&F in repair brass chromium plated toilet paper holder with flap complete all as specified and directed.

S&F 40 mm dia UPVC pipe fixed to WHB and urinal for out let of waste water, fixed in floor, wall including all fittings such as elbow, socket, tee, reducer etc complete all as specified.

Taking down PVC/AC pipes (including all fittings), complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor of 110 mm dia complete all as specified and directed.

S & F PVC(SWR) bend of 110mm dia of any radius complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia complete all as specified and directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with clamp made out of 25x3 mm flat iron, 6mm dia rod bar, nuts & bolts complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed complete all as specified and directed

S&F in repair 100 mm bore dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

Dismantling CI pipes of 100 size or pattern including all fitting fixed to wall, floors, etc all as specified

S&F cast iron ‘P’ trap or ‘S’ trap 100mm size complete all as specified and directed

S&F cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 100mm all as specified.

S&F grating doom 125 mm dia with waste hole of PTMTcomplete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed.

S&F chromium plated overhead shower rose swivel type 80 mm with CP arms 300 mm long complete all as specified and directed.

S & F water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed

S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair white vitreous china wash down water closet pan pedestal pattern (white) fancy type including built in vitreous china flushing cistern dual flush type of total capacity 10 litres including PVC white seat cover complete all as specified and as directed.

S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.00 m long including nut/washer complete all as specified and directed.

S&F 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete all as specified and directed. NOTE:- 1. The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. 2. The work shall be carried oiut by authorised applicator of Manufacturer. 3. Independent Testing of membrane shall be carried out from Govt Engg College/ NABL approved Lab before laying.

M&L for 20 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement complete all as specified and directed. (Note : WPC will be measured & paid for separately).

S&F of IInd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F towel rail 600 mm long of CP fixed with and including chromium plated brass screwed and wooden/plastic cleats all as specified

M/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed .

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item no 151.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.

All as per item no 151.00 above but one bell point complete all as specified and directed.

All as per item No 151.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.

All as per item No 151.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent boardcomplete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and as directed.

Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.

Supply and fixing for batten / angular fittings complete all as specified and as directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . Make: L&T/LEGRAND/SCHNEIDER/HAVELLS/HPL

Supply and fixing MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . Make: Schneider/ Legrand/ L&T / ABB.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens.

Supply and fixing MCB SPN 50 to 63 Amps, 10 KA, C-Series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing MCB TPN 50 to 63 Amps, 10 KA, C-Series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton.

Supply and fixing LED tube rod 18 watt 230 volt T8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/Crompton.

Supply and fixing LED batten tube light fitting 1x 9 watt 230 volt wall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make-Havells Cat No:-LUMILINEBS9WLED865SPCWH or equivalent of Bajaj/ CG / Philips.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

Supply and fixing in repair recessed mounting fitting 1 x 42 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 42 watt lamp incl all accessories complete all as specified and as directed. Make :- Havells Cat No - VENUSNEOHE2X2PLR18-42WLED857MOD, or equivalent Make of Philips / Bajaj / Crompton Greaves.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

Supply and fixing high performance metal body exhaust fan 300 mm sweep, 900 RPM 240 volts AC 50 Hz, heavy duty with suitable size MS sheet louver including connecting up to ceiling rose/ connector by three core sheathed copper conductor cable of suitable size complete all as specified and directed. Make : Havells, Cat No: Turbo Force SP or equivalent model of Baja/Usha/Crompton Greaves.

Supply and fixing plastic body air fan / ventilator with louver 230 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .Make: HAVELLS Cat No-Ventil Air - DS

Supply, installation and testing of electric water heater storage vertical type, BEE 4/5 star rated, 25 ltr capacity 240 volts 50 Hz comprising of high wattage heating element for instant heating, extra Mild steel with Glass lined coated inner tank, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provn of 04 Nos groutng bolts souitably flushed to wall or any other surface including electric connection with 3 core PVC insulated sheathed, stranded copper conductor cable/flexible chord and with one No 15 amp 3 pin plug top complete all as specified and as directed. Make:-Havells/Bajaj/CG

S & F PVC connection pipe hot and cold type, 15 mm dia, 450 mm long with brass adopter & washer on both sides complete all as specified and as directed. Make : Essco / Sona / Prayag.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces complete all as specified and directed.

Supply & fixing in repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion.

Supply , laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core.

M & L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation of thickness of sand 18 cm all as specified and directed by Engr - in - Charge. Note :- Sand thickness shall be measured 18 cm only after punning of sand .

M&L for bricks cover of old size bricks sub class 'B' with width equal to the length of the brick laid dry & flet abutted with with each other with gap between adjacent bricks n.exc 10 mm over UG cable for protection complete all as specified & directed.

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified & directed.

M/s KUMAR ENTERPRISES

M/S Harsh Traders

J K CONSTRUCTION

RC GUPTA AND SONS

MS JODHI PRASAD SINGH SONS

M/S SHEO KUMAR SINGH AND SONS