CGF Fund scheme 2025-26

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth with intial lead and lifts and cleaning and levelling the site etc.,complete

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing,and labour charges etc., complete as per standard specification

Plain Surfaces Below GL

Plain Surfaces 3.30m to 4.30m

Plain Surfaces at 7.30m to 8.30m

Plain Surfaces at 11.30m to 12.30m

Plain Surfaces at 15.30m to 16.30m

Plain surfaces - 19.30 to 20.30m

Square Column upto 3.30m

Square Column 3.30m to 4.30m

Square Column 4.30m to 5.30m

Square Column 5.30m to 6.30m

Square Column 6.30m to 7.30m

Square Column 7.30m to 8.30m

Square Column 8.30m to 9.30m

Square Column 9.30m to 10.30m

Square Column 10.30m to 11.30m

Square Column 11.30m to 12.30m

Square Column 12.30m to 13.30m

Square Column 13.30m to 14.30m

Square Column 14.30m to 15.30m

Curved Surface 16.30m to 17.30m

Curved Surfaces 17.30m to 18.30

Curved Surfaces 18.30m to 19.30

Curved Surfaces 19.30m to 20.30

Circular Column upto 3.30m

Circular Column 3.30m to 4.30m

Circular Column 4.30m to 5.30m

Circular Column 5.30m to 6.30m

Circular Column 6.30m to 7.30m

Circular Column 7.30m to 8.30m

Circular Column 8.30m to 9.30m

Circular Column 9.30m to 10.30m

Circular Column 10.30m to 11.30m

Circular Column 11.30m to 12.30m

Circular Column 12.30m to 13.30m

Circular Column 13.30m to 14.30m

Circular Column 14.30m to 15.30m

Reinforced cement concrete M25 grade 1:1½:3 (one cement, one and half sand and three blue course aggregate of 20mm size hard broken stone) for the following items. The rates excluding the cost of stone for the following items. The rates excluding the cost of supplying, fabricating and placing in opposition of MS / RTS Grills for reinforcement and centering, strutting & shuttering, but including cost of mixing, placing the concrete in position, vibrating, consolidating, finishing and curing the concrete etc., complete and as directed by the Engineer-in-charge. (The rates inclusive of testing the reservoir for the water tightness of the structure)

For 1.5m Below G.L

For 4.5m Above G.L

For 4.51m to 7.32m Above G.L

For 7.32m to 10.98m Above G.L

For 10.98m to 14.64m from G.L

Reinforced cement concrete M 30 Grade Design Mix for the following items. The rates excluding the cost of supplying, fabricating and placing in opposition of MS / RTS Grills for reinforcement and centering, strutting & shuttering, but including cost of mixing, placing the concrete in position, vibrating, consolidating, finishing and curing the concrete etc., complete and as directed by the Engineer-in-charge. (The rates inclusive of testing the reservoir for the water tightness of the structure)

For 14.64m to 18.30m from G.L

For 18.30m to 21.96m from G.L

Supplying and fabricating and placing in position steel reinforcement using Mild Steel or ribbed for steel rods for all RCC works as per the design given including cost of Steel and binding wire etc, complete in all floors complying with standard specification using MS plain rods or RTS rods.

Plastic Emulsion Paint Two coats with good quality of approved emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 600mm X 600mm Manhole Cover SFRC sizes of best approved quality and as per standard specifications etc.,complete.

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand, three aggregates) using 20mm HBG stones for OHT including grill in position, centering, shuttering charges, mixing concrete curing etc, to required height and clear width of 45cm consisting of two nos of vertical post of 10cm X 15cm and step salb of 25mm X 25mm etc,complete and as directed by Municipal Officers.

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, strutting, reinforcement, placing of concrete, finishing, curing and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed by Departmental Board officers.Seperste Sheet

Providing and fixing in position of precast RCC (1:11/2:3) Hand rails of approvced design for one meter height by using 20mm HBG stone including cost of all materials, centering, shuttering, strutting, reinforcement, placing of concrete, finishing, curing and fixing in position on the roof slab etc.,complete and as directed by dept officers.Seperste Sheet

Construction of RCC spiral staircase in RCC 1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse Aggregate) using 20 mm HBGS of 1.80 m diameter of required height for approach to the roof of Service Reservoir with RCC Handrails including earthwork excavation, providing CC 1:4:8 mix, RCC footing 1:1.5:3 mix, GL platform etc., and also including cost of steel reinforcement, fabrication charges, scaffolding, centering, precasting charges, cement, painting etc. complete as per standard specifications and as directed by Engineer. The staircase shall be braced to the column of service reservoir at suitable interval. (in the BOQ, quantity column the exact height to be mentioned from GL to roof slab bottom to get total value of work to be done.

Supply and delivery of CI D/F sluice valves with cap along with specials of the 150mm dia in size confirming to IS 14846 / 2000 (PN1) including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc, complete as per standard Specification.

Supply and delivery of CI D/F sluice valves for Scour with cap along with specials of the 100mm dia in size confirming to IS 14846 / 2000 (PN1) including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc. complete.

Provision for DI Pipe Line & Specials for Inlet, Out let Scour and Over flow Arrangements