GE 861 EWS-52/2023-24

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5Sqm and not exceeding 4.00 Sqm each complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed.

Demolition wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed.

Dismantling boarding of any description,fixed in any position with nail,complete all as specified and directed.

Dismantling plain or corrugated steel sheeting , any gauge and thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Demolation of brick/stone masonary work built in Cement Mortar including in all quoins etc and precast concrete articles complete all as specified.

Dismantling of timber scantling of any description complete all as specified

Dismantling fillets,rails etc un framed wk under 40 sqcm fixed in any position with nails complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50 m and making good in soft / loose soil complete all as specified.

15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement, complete all as specified.

M&L PCC 1:2:4, type B-1 (using 20mm graded stone agregete) as in copings/ plinth courses sides of rounded or chamfered on edges of interlocking tiles complete all as spd & directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-1 (using 20mm crushed stone aggregate) as in foundation filling and mass concrete.

M&L for 75mm thick Plain Cement Concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed.

75mm thick PCC 1:4:8 Type D-2 (40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40mm crushed stone aggregate) as in foundation filling and mass concrete.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm over and including 15mm thick screed bed in Cement Mortar 1:6 in floors etc set and jointed in neat cement slurry and in white or coloured cement to match the surface complete all as specified.

Glazed ceramic coloured tiles 450mm x 300mm x 7-8mm thick, designer & pattern(dark & light shade combination) as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick light shed (squre/ rectangular) polished ,area of each tiles n-exceeding 0.36 Sqm in floor and over 15mm thick screed bed in cm 1:6 as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all all as specified.

S&F Chequred cement concrete tiles 30cmx30cmx20mm thick, set and jointed and pointed in neat cement slurry with gray cement and pigment over 15mm thick screed bed in cm 1:6 finished complete all as specified.

S&F second class hard wood plain, solid, staight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified.

M&L for second class soft wood clean sawn scantling fixed in framed work complete all as specified.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.

30mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

M&L for 30mm thick flush shutters solid core construction with block board core and ply wood face pannel commercial type both face complete all as specified.

S&F 605mmx605mm GI frame work for seamless celling snap grid frame work for false ceilling with all necessary angle & Tee arrangement with and incl fixing cleats screw etc all as specified.

S&F hanger 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof by means of screws/ nut bolts, ceiling cleats made out of GI Flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long, grid size 605 x 605 mm complete all as specified and directed.

S&F false celling 8mm thick (Non asbestos fibre cement building board) fixed in celling flat or sloping inserted in GI/aluminium frame work complete all as specified and directed. (make-Armstrong,saint Gobain).

S&F in repair prelaminated, particle board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination fixed with nails to timber frame work complete all as specified.

M&L 6mm thick ply wood, grade BWR, type BB fixed with nails to timber frame work complete all as specified.

M&L for Veneered decorative plywood, grade 1 , 4mm thick (with BWR resin) with decorative face veneers one face fixed with nails to timber frame frame work complete all as specified.

M&L weather boarding 2nd class soft wood clean sawn,plain 20mm thick or fether edge 15 to 20mm thick and fixed with 30mm laps complete all as specified.

S&F boarding 2nd class soft wood fixed with nails planed one side with butt joints as in eves boarding complete all as specified.

S&F medium density fiber board 12mm thick fixed with frame wk complete all as specified.

S&F Powder Coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated anodised aluminium door shutters, of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Powder coated anodised aluminium window(three track) and ventilator shutters, cupboard shutter without sash bars, of any colour (Thickness of powder coating not less than 50 micron) aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S & F for galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified

S&F 0.63mm plain galvanised mild sheeting in ridges,hips,vally gutters,drip and straight flashing fixed complete all as specified.

M&L of brick work with sub class 'B' bricks straight or curved on plan exceeding 6 Mtr mean radius built in Cement Mortar 1:6 complete all as specified.

M&L half brick thick walls with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) all as specified.

S&F Framed work as in doors or gate of angle or other section with gusset plates, rails braces, etc, complete, drilled for gates of angle or other section fixing of steel sheeting or other covering complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

M&L Plain fillets, square, rectangular in section exc 13 Sqcm but n.exc25 Sqcm clean sawn secured with nails in Ilnd class soft wood.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm each pane complete all as specified.

S&F 5.5mm thick sheet tinted glass ordinary quality and glazing with aluminium beading/clips etc in square exc 0.5 Sqm each pane complete all as specified.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F aluminium anodised tower bolt of extruded section of length 150mm and fixed complete all as specified and directed.

S&F aluminium anodised tower bolt of extruded section of length 100mm and fixed complete all as specified and directed.

S&F aluminium anodised handle of length 150mm and fixed complete all as specified and directed.

S&F aluminium anodised handle of length 100mm and fixed complete all as specified and directed.

S&F to 75mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F to 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws.

S&F aluminium alloy anodised sliding door bolt 250mm of length with hasp,staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolt and sliding bolts comlete all ass pecified.

S&F of 15mm dia mild steel water tube medium graded galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified.

S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litre capacity, three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified.

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified.

S&F in repair PVC connection 15mm size with PTMT nuts of length 375mm, complete all as specified and directed.

S & F in repair 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair 15mm bore stop valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair Curtain Rod/ drapery rod 25mm dia Decorative type with a pair of brackets, powder coated of approved pattern and colour, complete all as specified.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surface, complete all as specified and directed.

M&L for Preparation of new steel surface of any description over 10 cm width or girth and applyin two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

M&L for Preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L precast RCC type B1 (1:2:4 using 20mm graded stone aggregate) as in cover slab for man hole and similar article with plain face in cm 1:4 complete all as specified.

M&L for mild steel TMT bars 10mm dia and over ,cut to length bent to shape required ,including cracking,bending spirally for hooping for columns, chajjas,lintel etc ,hooking ends binding and including binding wire (anneled) not less than 0.90mm dia or securing with clips all as specified &directed.

S&F in repair EWC one piece incl flushing cistern and strap 220mm of size 715x335x715mm snow white with slim soft close seat cover,Make-CERA Cat part No-S1013209.

S & F in repairs vitreous china Full pedstal wash basins snow white size 515x430x110mm including CP waste pipe complete all as specified.Make -cat part No-S 2040170,S 2090135.

S&F in repair CP waste coupling 32mm dia full thread approved make, Cat part No- F8050101 complete all as specified & directed.

S & F in repair single lever basin mixer with 450mm braided connection pipe Make-CERA Cat No- F 10116451 complete all as specified & directed.

S&F in repair Angle valve with flange for 15mm bore pipe complete all as specified. Make- CERA Cat No-F1016201 complete all as specified & directed.

S&F in repair wall mixer with bend pipe for over head shower complete fittings all as specified and directed.

S&F in Repair over head rain shower squre of size 200x200mm all as approved make CERA, Cat part No-F7010503AB complete all as specified & directed.

S&F in repair Health Faucet ABS Body with long 1m chromium plated PVC hose pipe Make, CERA Cat part No-F8030103 complete all as specified & directed.

S&F in repair towel rail 600mm long fixed with screw all as specified make- CERA Cat Part No- F-5006103 complete all as specified & directed.

S&F in repair paper holder cromium plated fixed with screws all as approved make -CERA Cat Part No- F5006109 complete all as specified & directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan/sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge.

M&L for concealed point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5Sqmm size, 1100volts, drawn through and including non metalic rigid PVC conduit not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5Sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of metal Shankin box/ hylem sheet fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete including making good disturbed surfaces with cement mortar (1:3) to match with the existing surface and existing colour, complete all as specified and directed for one light point controlled by one 5A switch. Note: (a) Colour coding shall be followed as given below:- (i) Phase - Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - Green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

All as per item No 87 here-in-before but for one ceiling Fan point controlled by one 5A switch.

All as per item No 87 here-in-before but for one exhaust Fan point controlled by one 5A switch.

All as per item No 87 here-in-before but for one 5A flush type switch socket point on same board.

All as per item No 87 here-in-before but for one 5A flush type switch socket point on independent board.

All as per item No 87 here-in-before but for one Bell point control by one 5A bell push switch.

All as per item No 87 here-in-before but for one 5 pin, 15A switch socket combination on the independent board using PVC insulated unsheathed multistranded copper conductor cable 2.5 Sqmm size, 1100 volts ISI marked, FRLS grade and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5Sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5Sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5Sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC Modular box with cover plate fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for One light point controlled by one 5A switch:- Note : (a) Colour coding shall be followed as given below:- (i) Phase - Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - Green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (c) Switch socket measured & paid separately.

All as per item No 95 here-in-before but, for one exhaust Fan point controlled by one 5A switch.

All as per item No 95 here-in-before but, for one 3 pin socket outlet, 5A on the same board.

All as per item No 95 here-in-before but, for one 3 pin socket outlet, 5A on the independent board.

All as per item No 95 here-in-before but, for casing and capping one bell point controlled by one,5 Amp bell bell push.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 Sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5Sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 3 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Yellow/ Blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

S&F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by Engr-in-Charge. Make : Anchor/Cona

S&F switch piano flush type single pole one way ,5/6 Amps complete all as directed.

S&F bell push, flush type single pole, 5/6 Amps complete all as directed.

Supply and fix switch sockets combination 2 in 1, 5 Amps flush type 240 Volts AC complete.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 & 15 Amps flush type universal controlled by one switch flush type 240 Volts AC complete.

S&F of fan regulator electronic dimmer, 450w,250V flush type and making all necessary connections complete all as directed.

S&F Ding dong bell AC 230Volts single pole bell 50 Hz all as specified and directed. Make : Anchor/Cona

S&F of lamp holder PVC/polycarbonate insulated body type complete all as directed.

Supply and fixing in repair LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge.

Modular switch 1 way 6A,1 module all as specified and directed.

Modular switch 1 way 16A,1 module all as specified and directed.

Modular bell push 6A 1 module all as specified and directed.

Modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed.

Modular socket 6/16A, 2/3 pin, combined 2 module all as specified and directed.

S&F in repair of round shape 12 watt (Warm light) 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair new generation walll/surface mounted 20W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge.

S&F in repair new generation walll/surface mounted 10W LED batten fitting, 2 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge.

S&F in repair light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. including connecting up with three core flexible copper conductor cable with suitable size and all as directed.

S&F in repair of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete fixing, cutting and making good existing surface to match all as directed by Engr-in-Charge.

S&F in repair of double door type vertical type TPN DB 4 Way ,415V with 200A busbar, with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed by Engr-in-Charge. Note :- DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F MCB SP 6-32 Amps,10KA, 'B' series 240V complete all as specified and directed.

S&F MCB SPN 32 Amps,10KA 'C' series 240V complete all as specified and directed.

S&F MCCB FP 63 Amps,16KA, 415 volt, complete all as specified and directed.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 16sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed.Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and laying in repairs 40mm dia GI tubing light grade with all fitting laid in trenches or pavement or fixed on wall or along pole complete for protection of GI strip or crossing of nallaj/bridge/road etc., complete all as specified and directed.

M&L for Earthing complete with MS plate electrode of size 600 X 600 X 6 mm buried directly and preferably vertically in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 Mtrs below ground level, connected to galvanised earth lead wire 4mm dia by means of check nuts, bolts, washers etc all as shown in electrical plate No. 3 of SSR Part-I, connected to Earthing test point including earth work, 1:3:6 C1 PCC chamber, 1:2:4 B1 PCC cover with 8 mm dia steel bars at 100 mm C/C suitable size of GI pipe for earth lead protection and watering, water funnel etc. complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead, 4mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing etc. as required all as specified and directed by Engr-in-Charge.

S&F in repairs security light brackets with 1.50mtrs long 40mm dia light grade galvanised iron pipe with 30° bend including flat iron clamps, nuts, bolts and washers to brace the same properly duly painted with two coats of silver coloured synthetic enamel paint over one coat of red oxide primer and making the good to disturbed surfaces to match with existing, complete all as specified and directed.

Supply and laying in repair service cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 16 Sqmm 2 Core nominal cross section complete all as specified and directed.

S&F in replacement of LED street/security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed.

Excavation in trenches n.exe 1.5m wide and n.exe 1.5m deep for laying pipe line incl getting out in soft/loose soil complete all as specified and directed.

Returning filling in incl spreading watering and well ramming in layers in hard/dense soil each not exceeding 25cm thick complete all as specified.

Removing surplus soil to a distance not exe 50 mtr and depositing where directed at a level not exe 1.5 m above the starting point complete all as specified and directed.

S&F in replacement of old damaged / unserviceable Gun metal globe or gate valve non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes 50mm bore complete all as specified for the following sizes of pipe

All as per item no 134 here-in-before but for size 25mm bore

All as per item no 134 here-in-before but for size 20mm bore

All as per item no 134 here-in-before but for size 15mm bore

All as per item no 134 here-in-before but for size 40mm bore

All as per item no 134 here-in-before but for size 80mm bore

M&L for lagging to 20mm GI tubing used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25gauge 20mm meshing and plaster of Peris 3 to 5 mm thick all around the mesh after breaking old unsv/ broken lagging all as specefied and directed by Engineer in charge.

All as per item ser no 140 here-in-before but for tubing/ pipe of size 15mm bore

Material and labour for cutting, drilling and tapping cast iron/GI water mains (in postion) in size for branch connection of the internal dia 25/20mm including excavtion earth work re-filling, leakge testing & fixing assceesory etc all as specified and directed.

Supply and layning in replacement of old damaged/ rusted flanged type GI tubes medium grades of 100 mm dia complete with all fittings (like; union, tee, bend, elbow, reducer, socket, flanged) to be fixed on wall and ceilings or laid in floors/trenches complete all as specifiedand directed. (Note : Bldg main raising line & connection line are semi concealed with necessary GI clamp for fixing with anchor faster nut bolts for fixing on wall)

All as per item No 143 here-in-before but of size of 50mm bore

All as per item No 143 here-in-before but of size of 40mm bore

All as per item No 143 here-in-before but of size of 25mm bore

All as per item No 143 here-in-before but of size of 20mm bore

All as per item No 143 here-in-before but of size of 15mm bore

All as per item No 143 here-in-before but of size of 80mm bore

Supply ,fixing ,connecting and testing 80mm sluice valve Cl body brass spindle, iron wheel head type PN 1.0 (ISI marked) complete including taking down of old one complete all as specified and directed by EIC.

Material and labour brick masonary valve chamber of size 0.90 m x 0.90 m x 0.90 m and cover including earth work complete all as specified and comprising of the following. (a) 150 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation (b) Brick work 230 mm thick built in CM 1:4 (c) 15 mm thick rendering in CM(1:4) internally and externally to exposed surface of brick work including 150 mm below ground level(d) 100 mm thick coping in PCC 1:2:4 type B1 using 20 mm graded stone aggregate (e) MS covers made out of 5 mm thick MS plate with double hinges, fixed MS angle iron frame made out of MS angle iron 40 x 40 x5 mm thick including 150 mm long hold fast made out of MS flat iron of size 25 x 4 mm embedded in PCC coping MS covers shall be provided with suitable hand grip and suitable locking arrangement all as directed. (f) All MS surfaces shall ,be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

All as per item No 151 herein before but of size 0. 60 m x 0 .60m x 0.60 m Internal size

M & L and T & P for replacement of foundation of pump motor assembly of 30 to 40 HP capacity by disconnecting the control wiring and earthings, disconnecting suction & delivery line from pump and fixing suitable size of dummy on pipe line, dismantling the pump motor assembly from bed and keeping pump, motor, coupling & fixing fasteners on safe custody, cutting the foundation bolts/studs, nuts by using oxy - acetylene gas cutting method/other means, removing rusted unserviceable foundation machine bed, demolishing & removing PCC foundation with foundation bolt guoting to suitable margin from bed and depth, fabrication of foundation beds with MS Channels, 'I' section, angulars of required size and duly applying one coat of red oxide primer and two coats of bitumen paint of approved quality, errecting/grouting and leveling foundation bolt with PCC filling, erecting/leveling machine bed with locking nuts, spring washer, vibrection absorbers, assembling motor & pump on machine bed including shaft aligning & fixing coupling, connecting control wiring, earthing on suitable terminals, connecting suction and delivery to the pump side, including Overhaul cetrifugal pump and motor 30 to 40HP by renewal / replacement of bearing, terminal covers. Repairs the studs, nuts, bolts, rubber couping, rubber bushes, spring, cups, shaft key slots, motor ventilation covers, impellers, foundation bolts and impregnation/ enameling of stator, rotor winding. Improve the old paint be removed by chipping apply 01 coat oxide primer, two coats of grey paint, align motors with drive mechanism etc complete testing and commissioning the pump assembly to the entire satisfaction of Engineer-in-charge

M/S SHEIKH FEROOZ AHMAD