PROVN OF TWO GRILL DOOR IN OPS ROOM OF HQ 115 INF BDE, ROAD FURNITURE (SIGN BOARD), STORAGE SHED AT 33 KVA SUB STATION, SENTRY POST AT RANGE AREA GATE, BICYCLE CUM SCOOTER STAND FOR STN HQ, LED SECURITY LIGHTS AND CONNECTED ITEMS NEAR BLDG NO PK-1 AN

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil, Complete all as specified and directed.

Excavation in post holes (or similar hole) each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, in hard dense soil, watering out rawing and removing surplus soil to a distance n.exc 50m and making good etc., Complete all as specified and directed.

Material & Labour for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil etc., Complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 mm deep in layers including watering & ramming etc., Complete all as specified and directed.

Material & Labour for Removing of excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc., Complete all as specified and directed.

Material & Labour for 40 mm Thick Damp proof course in cement concrete type B0 1:2:4 to horizontal or vertical surfaces including necessary formwork using water proofing compound @ 3% by wt of cement etc., Complete all as specified and directed. (DPC will be measured separately)

Spreading and levelling of soft loose soil in floor in layers n exc. 25 cm thick including well ramming watering as required etc., Complete all as specified and directed.

Material & Labour for cement concrete 100 mm thick type D2 1:4:8 (40 mm graded stone aggregate) in sub base of flooring etc., Complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone agg as in sub base complete all as specified and directed by Engr - in - charge.

Material and labour for 50mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base of floor, path etc, complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m informal and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Material & Labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in flooring including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Material & Labour for formwork to soffits of suspended slab such as roof slabs, floor slabs , landing and similar works n. exc 200 mm thick for rough finished surface etc., Complete all as specified and directed.

Material & Labour for form work to sides and bottom of beams for rough finished surface etc., Complete all as specified and directed.

Ditto all as per item no 14 above but for sides of concrete n. exc 20cm as in lintel etc., Complete all as specified and directed.

Material & Labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS etc., Complete all as specified and directed.

Material & Labour for Mild steel bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS etc., Complete all as specified and directed.

Ditto all as per item no 17 above But 5 mm and over upto 10 mm dia in stirrups, spacers and binders etc., Complete all as specified and directed.

Material & Labour for RCC Nominal Mix 1:2:4 Type B-0 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, seismic and other similar bands including use and waste of formwork all as specified and as directed by E-in-Charge.

Material & Labour for RCC 1:2:4 Type B-0 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floor, roofs landing, balcony, canopies, deck slab and the like all as specified and as directed by E-in-Charge.

Material & Labour for providing Cement concrete 1:4:8 Type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing hold fast, copping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, etc., Complete all as specified and directed.

Material & Labour for plain cement concrete 1:2:4 type B2 using 20 mm graded stone aggregate as in coping, edging, roof kerb etc as specified and directed by Engr - in - Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided for, Complete all as specified and directed.

Material & Labour for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & Labour for hardcore of broken stone or boulders of gauge exc 63mm but not exceeding 100 mm deposited, spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface etc., Complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr - in - charge.

Supply & Fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and a directed by Engineer-in-Charge.

Supply & Fix MS Work Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. conforming to Fe 410-W (Gde E-250) Quality A etc., Complete all as specified and directed.

Supply & Fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe 410-W (Gde -E-250) quality B including distance pieces, cleats etc., complete all as specified and directed.

Supply & Fix Rolled mild steel square hollow sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe 410-W (Gde -E-250) quality B etc., Complete all as specified and directed.

Supply & Fix plates,(plain or chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment all as specified and directed by Engineer in charge.

Supply & Fix Mild steel screw bolts (machine made) 16 to 20 mm neck, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long etc., Complete all as specified and directed.

Supply & Fix Straps, supports or suspenders, hooks for hanging fans, MS Plates, Nut bolts, hold fast, clamps hooks and similar small articles conforming to Fe-290 Gde-E-165 etc., Complete all as specified and directed.

Material & Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) etc., Complete all as specified and directed.

M&L for brick work with fly ash modular bricks, in cement mortar 1:6, straight or curved on plan exceeding 6m mean radius, complete all as specified and directed.

Material & labour for rendering 15 mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & labour for rendering 10 mm thick in CM(1:4) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & labour for rendering 15 mm thick in two layers on PCC block masonry in CM(1:4) first coat 10 mm thick & second coat 5 mm thick including water proofing compound in second coat with even & smooth (without using extra cement), complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2465-1975 etc., Complete all as specified and directed.

Material and labour for 3 coats of white wash including preparation of newly plastered wall surface etc., Complete all as specified and directed.

Material and labour for 2 coats of white wash including preparation of newly plastered ceiling surface etc., Complete all as specified and directed.

Material & Labour for 15mm thick cement screed bed in cement mortar 1:4 on concrete surface of roof fair and even finished surfaces etc., Complete all as specified and directed.

Material & Labour for sand cushion for cable protection in trenches and fixing of inter locking tiles complete all as specified in SSR Part-I 2009 etc., complete all as specified and directed

Material and labour for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design laid over 50mm thick sand cushion etc., Complete all as specified and directed. Note:- Sand cushioning shall be measured and paid separately.

Material & Labour for preparation of New steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc., Complete all as specified and directed.

Material & Labour for Framed work such as grills, gratings, for ornamental and intricate design etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc., Complete all as specified and directed.

Material & Labour for Mild steel, plain, black sheet 1.6 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Complete all as specified and directed.

Supply and fixing of Endura Omni 45W LED street light New generation energy saving & environmental friendly long life versatile IP 66 with Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management and tempered protective toughened glass with IK07 rating and lens on the led chips and APFC driver, CCT 5700K, System Lumen efficiency 100 lumen/watt, inbuilt surge protection, PF not less than 0.95 and THD less than 10 including suitable size galvanised iron pipe light grade bracket bent to shape over all length 1.2 mtr fixed to pole with 2 Nos clamps made of flat iron of size 25 x 6mm and suitable bolts and nuts with washers, including PVC insulated copper conductor multi stranded single core 2.5 sqmm from fitting to OH line/up to looping terminal box complete all as specified and directed. Make- Havells, Philips, Wipro etc.

Supply and fixing in replacement automatic street light switch for automatic switching of street light/high mast light (timer switch) based on lux level of natural light. The sensor along with suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 54 of capacity 5 KW, Single phase , 240 V complete all as specified and directed. . Make:- Kaktiya Energy system (model - SWADEEP 02EC 5kW1P or equivalent model of /philips/Havells)

Supplying, fixing and erecting truly to vertical position steel tubular pole complete with cast iron base plate welded with pole, final taper plug, bolt, nut and screws as specified Type 410 SP-31 (9 metres long) including one coat of red-oxide zinc chrome primer and two coats aluminium paint on surfaces, exposed to view and making 30cm wide strips (Total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, and writing pole numbers with black colour paint on yellow colour back ground paint of 5 inch diameter after painting, complete all as specified and directed. (PCC, earth work shall be measured and paid separately under respective items.)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core etc., Complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sq mm 2 core etc., Complete all as specified and directed.

Supply and laying burnt bricks sub class 'B' cable protection laid length wise perpendicular to the axis of cable etc., Complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of pole/stay assembly etc including necessary form work, etc., Complete all as specified and directed.

Supply and fix Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 2 pole 16 A - 01 No MCB SP 0.5 TO 6 Amps 10 KA - 01 No including Cable Glands suitable for inserting cable for earth connectivity confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers complete all as specified and directed Note : The rate quoted includes cost of MS Clamps, bolts, nuts and washers

Provn of Sign Board (Steel Display Board ) made up with 5mm thick ACP Sheet of Size 1.50 X 1.20 M, Printed with retro reflective print (both side) framed with steel pipes and fastened with steel button fastener and framed with Tubular Steel Pipes 40 mm dia 4 mm thickness with round cap and cross support between two poles, overall ht overall ht above and below GL 3.2 M including earthwork, excavation, PCC 1:3:6 Type C2 in foundation , returning filling complete all as specified and directed by Engr-in- Charge.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 9140.00 /- ]

chhaya builders