Design, Manufacture, Supply, Installation, Testing and Commissioning of 7.5 Cusec Capacity Vertical Turbine Pumping Unit with 12 meter dynamic head and allied Electrical Equipment for Lift Irrigation Scheme Kreshibal of MISD Headquarter.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer, Mechanical Irrigation Division Srinagar.

Name of Work: Design, Manufacture, Supply, Installation, Testing and Commissioning Of 7.5 Cusec Capacity Vertical Turbine Pumping Unit With 12 Meter Dynamic Head and allied Electrical equipment For Lift Irrigation Scheme Kreshibal of MISD Headquarter. ----- Est. Rs.21,70,602

Contract No: eNIT- 20

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words

1 Design, manufacture, supply, installation, testing and commissioning of 7.5 cusec capacity Vertical Turbine pump with 12-meter dynamic head coupled with 60 HP(Minimum) vertical Sq. Cage induction motor for Lift Irrigation scheme Kreshibal complete as per IS 1710 As per Appendix "B" 1 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Providing and installation of medium duty chain pulley block with lift height of 06 mtrs (Preferred make: Indef/ Pullift/ Elephant) 5 Ton Capacity 2 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Providing, fitting, installation, testing and commissioning of 150 KVA voltage controller/stabilizer as per specifications below: Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step. Type of Regulator : Double plate type with electrolytic copper contacts. Input voltage : 180-400 volts. Output voltage : 400 + 10% volts. Frequency : 50+ 3 C/S. Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fiber glass insulations to tested parameters. Efficiency : 98 % Cooling : Naturally, Oil cooled Temp. Rise (Max) : 30°C above ambient Mounting : On Uni-directional wheels. Correction rate : 30 volts per step Wave form distortion : virtually nil Duty cycle : 100% continuous. Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations As per Appendix "B" 3 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Providing and fitting of 70 sqmm XLPE insulated, 1100V single core armoured industrial copper cable as under (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab). The cable is required to be laid in Three lines from motor to Starter and starter to Voltage stabilizer and stabilizer to MCCB alongwith required size copper thimbles. 4 150 Mtr 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Providing, Installation Testing and Commissioning at site 100 HP capacity Auto Transformer Starter. The starter shall comprise of the following equipment and accessories. a) Main Contactor Assembly of L&T/Siemens/Schnieder make having capacity of 250 Amp. b) Delta Contactor Assembly of L&T Siemens/Schnieder make having a capacity of 200 Amp. c) Auto Transformer contactor Assembly of L&T/ Siemens/Schnieder having a range of 100-125 Amp. d) Thermal overload Relay of MN series of required Capacity of L&T makes. e) Double vacuum timer assembly having time range of 0-60/sec. Barat Batlar Hamar or Equivalent make. f) Single phase preventer of L&T make/Minilac make for above capacity starter. g) Auxiliary fuse units of suitable Ampere range. h) Electrolytic Copper bus bar strips of suitable size of duly tinned air insulated mounted on suitable size backlit insulators. i) Three No. Current transformer coils of suitable range of L&T/AE make fitted in each bus bar strips connected to 96mmx96mm square flush type Amp. Meter of AE/L&T make fitted on the door of the Panel housing. Each phase shall indicate the Amp range by having one number selector actuator Switch fitted. As per Appendix "B" 5 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing, fitting,testing and commissioning of ML3 FASD Starters (For Puming Unit-1 & pumping Unit -2) having following specifications at LIS Kreshibal Type/ Rating: ML-3. Make: L&T Relay Range: 28-42 A. Motor Rating: AC3-Phase, 415 + 15% V, 50 + 3% HZ. Relay :ML 2/3 Conformance to Standards IS/IEC 60947-4-1, IEC 60947-4-1 Degree of protection : IP 54 The Starter shall have all three modes of operation like Auto, Manual and Bypass and the starter shall have protections like single phase preventer, phase imbalance, reverse protection, overload etc. The starter is to be provided with Under/Over Voltage Protection relay/system with Adjustable Over and Under voltage trip level of L&T/Minilec/GIC Make along with wiring as per site requirement. The job is inclusive of providing and Fitting of the starter as per site requirement along with nuts, bolts & washers, which further includes minor wiring i.e. connecting of main incoming and outgoing connections with copper wire duly crimped with copper thimbles as per site requirement and finally testing of the starter on full load at site. 6 2 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

7 Design, manufacturing, providing, fitting, testing & commissioning of 400 Ampere LT Distribution Panel Board. Free Standing, Floor mounted compartmentalized design housing for all the equipment fabricated out of 2 mm thick sheet having abdicated size, shall be fabricated with a hinged door at the front frame fabricated out of 75mm ISMC welded / bolted to the housing at the bottom. The housing shall have to be provided with necessary cut out spares for switch gears/ meters / selectors incoming and outgoing connections and have air vents and shall have to be painted with two coats of red oxide primer spraying two coats of synthetic enamel of grey /suitable colour shade from inside as well as outside after providing and applying of putty and smoothing of the surface. The minimum width of panel should be at least 18 inch. Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three a) Distribution bus bar Type -----Electric grade copper with red, blue, yellow & black insulated with heat shrinkable sleeve of adequate section. Earth busbar to be provided without sleeve. As per Appendix "B" 7 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words