CONSTRUCTION OF BUILDING WORK (REMAINING) AT GUPS DAMORPHALA DABAYCHA BLOCK- KHERWARA DISTRICT- UDAIPUR

Earth Work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50mtrs All kinds of soil

P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering- all work upto plinth level 1:4:8(1 cement:4 coarse send:8 graded stone aggregate 40mm nominal size.

STONE MASONARY FOR FOUNDATION Random Rubble Stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement sand mortar 1:6 (1 cement : 6 sand)

P.C.C. IN FOUNDATION Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering- all work upto plinth level 1:2:4(1 cement:2 coarse send:4 graded stone aggregate 20mm nominal size.

PCC: Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:3:6 (1 cement:3 Coarse sand :6 graded stone aggregate 20 mm nominal size).M 10 grade nominal mix

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix /Design Mix

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : cement sand mortar 1:6 mix

Brick masonary with bricks of Ist Class Designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in Cement mortar 1:6 ( 1 Cement :6 Coarse sand) FOR SQUARE OR RECTANGULAR PILLARS UPTO 45CMS LENGTH AND ALL SIDE FREE

Brick masonary with bricks of Ist Class Designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in Cement mortar 1:6 ( 1 Cement :6 Coarse sand)

Half brick msonary in superstructure above plinth level uoto floor third level using bricks of designation 75 in cement mortar 1:6

Brick masonar work in partition in superstructure upto third storey 7 cm thick with using bricks of class desigbation75in cement mortar 1:4 ( 1 Cement :4 Coarse sand)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc (up to plinth level)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor three level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. TMT bars (coforming of relevent IS code.)

Grading roof for water proofing treatment with water proffing compound: Cement concrete 1: 2: 4 (1 cement: 2 Course sand: 4 Greded stone aggregate 20 mm nominal size)

Pointion on stone masonary in cement sand mortar 1:3 raised &cut pointing

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished 20 mm thick

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished 25 mm thick

Plaster(Ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)

Random rubble dry stone Kharanja under floor.

Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete

Door Frames : P & F T- iron frames for doors , windows and ventilators of mild steel , Tee section joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement:3 fine sand6 graded stone aggregate 20 mm nominal size:) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinged and screws and applying a priming coat of approved steel primer

Providing and fixing M.S. double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra ncluding all fittings, as per direction of Engineer-in-charge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint.

Providing and fixing M.S. sheet 1mm thick single leaf door shutter windows in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint

Supplying & fixing fixed wire Gauge of 14mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not eeding 150mm distance.

Providing and fixing square bars or other flat welded to window ventilators etc.

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Providing and fixing angle iron frame 25x25x3 mm for ventilators with fixed wire gauge 16 mesh 24 gauge incl. 10 mm square bars at interval of 100mm welded screwed to frame with metal beading 20x3mm complete in all respect as per design

Supplying and fixing of steel doors, with frame of hollow metal pressed section (80X50mm) of 1.25mm thick with single sheet shutter having thickness 0.8mm M.S. sheet to spot welded and embossed with rib types design front vertical including holds fasts of (15x3mm), M.S. oxidized fittings such as butt hinges sliding doors bolts, handles, tower bolts etc. complete in all respects as per drawing and specifications including applying poriming coat of approved steel primer.

Supply and fixing in walls machine cut and polished stone shelves,tand and in CM 1:3 with machine cut edge kota stone 25 to 30 mm thick

PANTING ON DOORS & WINDOWS :- Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work).

Exterior finishing :- Finishing walls with acrylic Plastic emulsion smooth exterior paint of approved brand and make required shade including all scaffolding. New work (two or more coat)

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

white washing three or more coats to give an even shade on new surface.

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding New Work ( Three or more coats)

Gola Providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design.

Copping: Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls(any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, copping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M15 grade nominal Mix 1:1.5:3(1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) OnParapet Wall

Making of Drip course (Tapaka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design

Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandha as per design complete in all respect ( wooden or PVC hand railing to be paid extra) with priming coat of red oxide.

Structural steel work in single section fixed without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height

Providing corrugated G.I. sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets. 0.63 mm thick

Providing & Fixing Ist quality standard White, gray, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 and IS: 15622 of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and piller)

Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).

Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90mm average thickness (as per Jaipur Practice) with ceilling pointing in cement sand mortar 1:3 Complete as per specification for span. upto 2.00 mtr

Providing & laying chequerred plain cement concrete embossed to specially manufactured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete

Add extra for incenerator

P&F rigid PVC pipe fittings (IS: 4985 mark) class II/(4 kg/cm3) of ap

proved quality /make including joining the pipe with solvent cement rubber ring and lubricant Vent Cowel 110 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant

Bend 87.5110 mm dia

Vent Cowel 110 mm dia

Pipe clip 110 mm dia

P & F Bib Cock (IS : 8931 Mark) superior quality of approved make.Brass 400 gm, 15 mm nominal bore.

P & F Bib Cock (IS : 8931 Mark) superior quality of approved make.C.P. Brass 15 mm nominal bore.

P & F Stop cock (IS:8931 Mark),Superior quality and of approved mark: Brass 400 gm. 15 mm nominal bore

P & F Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.Brass wt. 1000 gm, 25 mm

P & F Intel connection (Angle Valves) Superior quality of approved make C.P. Intel connection 15 mm

P & F WVC half- round Channel of approved make in CM 1:3 joints finished in white cement of size 100 mm dia

P&F Ist quality WVC Urinal (IS :2556 mark) with 25 mm dia G.I.waste pipe, dome waste couplings, concealed iron brackets or screw etc. complete Flat back (small) size 456 x 355 x 265 mm

P & F WVC ( IS :2556 mark) squatting urinal of standard make complete including cutting & making good the floor size 450 x 350mm

1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make with large waste coupling. 18 x 16 x 6 inches

P & F Indian type white glazed vitreous china Ist quality W.C.orissa pan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm

P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: 450 x 300 mm .

P & F GI pipes ( Internal works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.15mm dia Nominal Bore 'A'Class

P & F GI pipes ( Internal works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.25mm dia Nominal Bore 'A'Class

P & F GI pipes ( External works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.15mm dia Nominal Bore 'A'Class

P & F GI pipes ( External works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.25mm dia Nominal Bore 'A'Class

P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:500 litres capacity.

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :25mm nominal bore.

P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:200 litres capacity.

Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M- 15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr .Inner dia 90cm & 10 to 12mtr deep.

Supply of ERW MS block casing pipe ISI marked(IS:4270/11/1992) of grade Fe410 of 100 mm

Suppling of India mark-II hand pump set, complete ISI marked with cylinder and 10 connecting rods etc.

Suppling and installation of 32 mm dia GI pipe medium class ISI marked I;n 3 mt length including all accessories and fitting required for installation of hand pump

Installation of India mark II hand pump set complete existing plateform

Construction of 185 cm dia platform as per approved designed and drawing of UNICEF