REPAIR REPLACMENT TO JOINERY STEEL GATE ROLLING SHUTTER PLUMBING SANITARY FITTINGS FALSE CEILING TILING ETC INSIDE COD UNDER AGE B R I OF GE I KANPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete not exc 15 cm thickness below or above ground level of any description complete all as specified and directed

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for first quality 7 to 8 mm thick non skid ceramic coloured tiles (joint free) (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:4 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

All as per item No 04 above but on wall as skirting/ Dado incl 10 mm plaster in CM (1:4) complete.

M&L for first quality glazed ceramic joint free coloured tiles (joint free) of size 300mm x 450mm x 7 to 8 mm thick on vertical surfaces; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4, as in dado/ skirting complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

Taking up or down steel tubing and connections of 15 mm bore including removal from site complete all as specified and directed.

All as per item No. 7 here in before but of 20 mm bore.

S&F 15mm steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed. Make: TATA/Jindal/Prakash Surya as approved by GE.

S&F 20mm steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete and all as specified and directed. Make: TATA/Jindal/Prakash Surya as approved by GE.

Supply and fixing in repair 15 mm dia bib tap fancy type CP cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. Make : Hindware / L&K / Plumber / Jaquar/Prayag as approved by GE.

S & F in repair 15mm bore stop valves/ angle cock,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make : Hindware / L&K / Plumber / Jaquar/Prayag as approved by GE.

S & F in repairs Pillar tap fancy type " pressure with or without letter cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'HOT or cold with long screwed shanks and fly nuts screwed for irion pipe and fixed complete all as specified and as directed. Make: L&K/ Hindware/ Prayag/ Jaguar/Plumber as approved by GE(I)

S & F in repairs vitreous china wash hand basin, white flat/angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of angle iron brackets, 75 cm long and 25 mm bore PVC waste pipe and 32 mm dia CP waste coupling complete all as specified . Make of WHB :- Hindware / Cera / Parryware as approved by GE.

S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including PVC P or S Trap 100mm bore and flusing pipe etc complete all as specified and directed. Make : Hindware/Cera/Parryware

S&F in repair vitreous chinaware EWC water closet pan (Padestal pattern), white with and including flushing pipe white seat & cover with flat bottom with CP hinging device complete all as specified and directed. Make :- Hindware / Cera / Parryware as approved by GE.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including 800 mm long PVC waste pipe / flush pipe , complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinals back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. Make :- Hindware / Cera / Parryware as approved by GE.

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed. Make: Hindware/Cera/Prayag/ Parryware as approved by GE.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed. Make :Symet prayag

S&F in repairs PVC (SWR) floor trap/Nahani trap plain with grating including jointing with solvent cement including 125 mm chromium plated grating with hole including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F in repair 15mm bore PVC connection 450mm long complete and all as specified and directed

Dismantling water tanks capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed.

Dismantling water tanks capacity exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE.

Taking down 75/ 110 mm dia rain water pipes, any pattern with all fittings complete all as specified and directed.

S&F (SWR) PVC Pipe 110 mm dia pipes single socketed in any length with rubber ring joints fixed to wall/ceiling complete all as specified and as directed

S&F PVC (SWR) vent cowl 110 mm dia pipes

S&F PVC (SWR) bends for 110 mm dia pipes

S&F (SWR) PVC Pipe 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches, floors complete all as specified and as directed

S&F (SWR) PVC Pipe 75 mm dia pipes single socketed in any length with rubber ring joints laid in trenches, floors complete all as specified and as directed

S&F PVC (SWR) bends for 75 mm dia pipes

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) n. exc 1.5 sqm complete all as specified and as directed

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and as directed

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed

Taking down shutters of any description exceeding 1 Sqm n exc 2 Sqm each complete all as specified and as directed

M&L solid PVC frame ( single rebated) of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet with homogenious fine cellular structure having smooth outer integral skin with suitable metal stifner & fixed with 100x8 sheet metal CSK (copper screws)screws complete all as specified and directed and as shown drawing . Make : Rajshree plastiwood/Sintex as per approved by GE.

M&L factory made solid panel PVC moulded door shutter with wood free EPS 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plan colour PVC sheet on back face, supply & fix in frame at site as per specified & directed Make : Rajshree plastiwood/Sintex as per approved by GE.

S&F 100 mm long PVC butt hinges complete all as specified and as directed. Make : Prayag or eqv.

S&F 150 mm long PVC handle complete all as specified and as directed. Make : Prayag or eqv.

S&F 150 mm long PVC barrel tower bolt complete all as specified and as directed. Make : Prayag or eqv.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing holdfast and coping including all necessary form work complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings, hold fast and hanging also fastening and fixing confirming to Fe 410-W (Gde-E- 250) quality- 'A' complete all as specified and as directed.

S & F of 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. Note : Manufacturer test certificate and PVrs shall be submitted by contractor before claiming payment against this item.

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 (S/F of 3.0 mm thick plain ordinary glass panes and glazing with oil putty and cost deemed to be included in the item rate quoted).

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 (S/F of 0.45 mm dia and 1.18mm aprature galvanised wire cloth ,and cost deemed to be included in the item rate quoted). specified and directed.

M&L factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 specified and directed..S/F of 4.0 mm thick figured glass panes glazing with oil putty and cost deemed to be included in the item rate quoted).

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 grade 'A' complete all as specified and directed.

M/L for preparation of new surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying two coat of Synthetic Enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair galvnanised mild steel wire cloth galvanized 0.45mm normal dia of wire and average width of aperture 1.18mm complete and all as specified and directed

Hacking out old broken glass any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

All as per item No. 51 here-in-before but from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.

S&F 3mm thick plain glass sheet and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

S&F 4 mm thick figured glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled size 100mm complete all as specified and directed.

S&F aluminium anodised handle "D" type of size 150mm complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Cutting holes in brick wallls/ stone walls built in cement mortar for inserting holdfasts and making good dismantled portioned in CM 1:3 or cement concrete type B-1 using 20mm graded aggregate as required thickness of wall exc. half brick thick but n. exc one brick complete all as specified and directed.

Dismantling of steel work of any description in any positions not otherwise provided for complete

S & F steel rolling shutters, without ball bearings 1.00 mm thickness of lath including top cover,anchoring rod,hasp and staple and one shop coat primer, erected in position as indicated complete including taking down of the same push pull or manual type complete all as specified and directed.

S & F Ball bearing for rolling shutters complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L brickwork with flyash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 65 above here in before but except bricks.including cleaning of bricks. Note : Old serviceable bricks obtained vide item no 64 above shall be reused.

Taking down cement plaster from brick wall including racking out joints, hacking for key & scrubbing down with water where existing complete all as specified and directed.

M&L 15mm thick rendering on fair faces/ other than fair faces of brick or concrete surface, wall in CM 1:6 finished even & smooth complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface finished even and fair without using extra cement including mixed wiith water proofing compound 3% by weight of cement or as per manufacturer instruction complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade over a coat of cement primer on walls all as specified & directed by Engineer-in-Charge

Dismantling wall panelling or ceiling boards of any descripton any thickness & at any height complete all as specified and directed.

M & L for powder coated GI grid frame work for false ceiling of size 605x605mm, the snap grid shall be of GI powder coated main & cross tee of size 36.5x25x1.4mm (weighing 0.24 Kg/RM) and angle of size 23.5x26.4x1.4mm (weighing 0.191 Kg/RM) fixed to wall with rawl plug and stainless steel screw 50mm 450mm c/c and tied with and incl 4 mm dia suspension wire MS @ 1200mm C/C all as specified and directed

M & L for providing 12mm thick Gypsum board 60x60cm in size fixed in ceiling (GI powder coated snap grid work) with screws as per manufacturer instructions and applying two coats of oil bound distemper over a coat of primer complete

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary and making good disturbed ground as in natural ground complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 63mm to 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured).

All as per item No -78 but fixed in repair. Note: Old serviceable barbed wire retrievd from item no 77 shall be reused.

S&F Mild steel angle iron for posts and struts as in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drillings, bolting or riveting, etc. and similar confirming to Fe 290 Gde E-165complete all as specified and directed.

M&L for welding in repair n exc 6mm thickness of metal to be welded

Dismentling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and directed.

S & F of regular modified Polyester colour coated galvanized steel rib profile sheet(TCT) 0.50mm thick E42(inclusive of protective coating ) overall width 1060mm and total mass coating of 150 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers more than 3.00sqm patches as required in shapes complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd(JSW) (g) Everest Industries

S & F regular modified Polyester colour coated galvanized steel plain profile sheet(TCT) 0.50mm thick E42 (inclusive of protective coating ) as in ridge , valley, gutter and total mass coating of 150 gms/sqm on both sides as per IS-14246:95(JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd.(c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (JSW) (g) Everest Industries

Fixing only old 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts

Dismantiling of CGI/PGI sheets any thickness as in roof coverings complete all as specified and directed.

S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with zinc coating 120 gram/sqm two corrugations side lap & 150 mm end lap ,fixed with 'L' type or 'J'type or crancked hook bolt and washers or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed.(Make - SAIL/TISCO/RINL/JSW Steel Ltd)

All as per item No. 86 here in before except sheet.(sheet retrieved from item no 26 shall be reused.

S & F 0.63 mm thick PGI sheeting of class -VIII as in ridges, hips, wall cladding and straight flashings etc ,fixed with 'L' type or 'J'type or crancked hook bolt and washers or with self drilling zinc aluminium coated metal screws of suitable size having cap with rubber washers as in roof covering/vertical surfaces complete all as specified and directed.(Make - SAIL/TISCO/RINL/JSW Steel Ltd)

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as specified and dorected.

S & F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, and watch tower structure rails fastenings and heavy bracket frames beam, tee, channel or flat sections including distance pieces, cleats etc. and similar work confirming to Fe-410 Gde E-250 quality A complete all as specified and directed at site.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L 75 mm thick PCC type C-1, 1:3:6 (20mm graded stone aggregate) for plinth protection surface finished even and smooth without using extra cement complete and joints filled with hot bitumen 85/25 grade and sand in 1:3 complete all as specified and directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item no 94 above but except material

M&L 75 mm thick PCC 1:4:8,type D-2 using 40 mm graded stone aggregate, as in sub base finished even and rough complete .

M&L Sand filling 25 mm thick , under floor or in fdn, spread, rolled and consolidated to required gradient and camber .

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M35 grade with grey cement and no pigment.

Dismantling loose concrete cover of RCC coloumns, beams slabs, chajjas and the like as directed, roughening and cleaning in concrete surfaces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement , providing chicken wire mesh fixed with suitable nails etc as reinforcement to concrete surfaces, including applying adhesive/admixture over mesh as per manufacturer instructions of Make Sika/Pidilite/Fosroc as approved by GE and providing 20 mm thick (average thickness) dubbing coat in CM (1:3) including 10 to 15 mm thick plastering in CM 1:4 even and smooth complete all as directed including providing scaffolding system on the exterior side, upto double storey building made with wooden balli/bamboo of suitable size or MS tube stiffened with suitable bracing, runners connection with the building, challies for making working platform upto requisite height and required location with essential safety features for the workmen etc including suitable coat of finishing to match with the existing surface complete as per directed and approval of Engr-in-Charge.

Note for all items of BOQ: Entire work listed in BOQ shall be executed in Restricted area.

ARORA BROTHERS