SPECIAL REPAIRS BLDG NO P-49 AT HARDING LINES OF HEAD QUARTERS JUNIOR LEADERS WING, THE INFANTRY SCHOOL, BELAGAVI UNDER GE BELGAUM

Amount

Material and labour for Second class hard-wood in scantling clean sawn and fixed including dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed work complete all as specified and as directed.

Description all as per item no :1but except timber including dismantling timber scantlings 40 sq. cm and over in section, in any position for unframed work complete all as specified and as directed.

Material and labour for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with creosote oil complete all as specified and as directed.

Supply and fix Pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified including dismantling plain or corrugated transulant etc asbestos cement sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Plain galvanised mild steel sheeting 0.5 mm thick class 8, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete ncluding dismantling plain or corrugated transulant etc asbestos cement sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed.

Supply and fix Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B' complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 including dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165. dismantling structural steel work complete all as specified and as directed.

Material and labour for Providing cement concrete type C1 1:3:6 ( using 20mm graded stone aggregate) in coping/bed plates eaves filling in roof including necessary form work complete all as specified and as directed.

Supply and fix Aluminium composit panel board 3mm thick for cladding/bush board with aluminium frame work of size 35mmx25mmx 2mm thick aluminium section with necesary fitting and scaffolding etc, including dismantling boarding of any description fixed in any position with nails etc complete all as specified and as directed.

Material and labour for Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board including dismantling old ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc, and remopval of debris off the premises complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 with water proofing compound over 10mm thick rendering in cement mortor 1:6 on fair faces of brick workor PCCblock masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. . Note : water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound .Note :Make : Impemo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall case putty complete all as specified and as directed.

Material and labour for Preparing newly plastered surface of wall and applying two coats of exterior emulsion paint (Make :Apex ultima - Asian paint) over a coat of water based primer complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two oil bound distemper over a coat of primer and including preparation of old decorated surfaces of wall complete all as specified and as directed.

Material and labour for Preparing old surface of wall plasterd or unplastered surfaces by brooming down and washing with water and appyling two coats of exterior emulsion paint (Make ASIAN PAINTS : Brand :Apex ) complete all as specified and as directed..

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Vitrified Coloured Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6completeall as specified and as directed. Note : Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including demolition of 75mm thick cement concrete in ground floors n exc 15cm thick unreinforced complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) of area exc 1.5 Sqm and n exc 4 Sqm.each and taken as credit complete all as specified and as directed

Material and labour for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed

Material and labour for Factory made 2nd class hard wood plain, framed, panelled door shutter 35mm thick , two panels with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats complete all as specified and as directed.

Material and labour for 2nd class hard wood Glazed and skeleton shutters , 35 mm thick , open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain,chamfered or rounded,mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails and divided into square with plain chamfered or rounded mitred and rebated sash bars any numbers size of members of shutters as specified in SSR Part-I Section 8 Clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for solid PVC Door Frame(single rebated) of Size 60mm x 30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing(Note: Door frame shall be water proof shall be water proof, termite proof, elegant and should have excellnt screws holding strenght to fix hinges and hold doors properly for a long life)

Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.

Descrition all as per item No 38 here in before but fixed in repairs

Supply and fix IInd class hard wood wooden boarding 20mm thick clean sawn , butt joints with nails in any situation complete all as specified and as directed

Description all as per item no :40here in before but 75mm size complete all as specified and directed

Supply and fix in repairs Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed..(ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Classic/Crown/Adarsh

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed.Make :Classic/Crown/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed..Make :Classic/Crown/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed..Make :Classic/Crown/Adarsh

Supply and fix Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed..Make :Classic/Crown/Adarsh

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane including hacking out old broken glass(any thickness/size,quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item No 50 here in before but 20mm dia bore of pipe.

Supply and laying 15 mm of UPVC pipes of pressure rating 10 Kgf/cm2 fittings on walls/ceilings or laying in floors complete all as specified and as directed. Note Make :Ashirwad/Astral

Description all as per item No 52 here in before but 20mm dia bore of pipe.

Supply and fix in repair 15mm dia Bib taps, cast copper alloy Fancy type CP brass long body,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Note : Make : JAQUAR/HINDWARE/MARC

Supply and fix in repair 15mm dia Bib taps, cast copper alloy Fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directedNote :.Note : Make : JAQUAR/HINDWARE/MARC

Supply and fix in repair 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed .Note : Make : JAQUAR/HINDWARE/MARC

Supply and fix in repair Vitreous china water closet, Pedestal type, white including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc .complete all as specified and as directed. MAKE ; HINDWARE/CERA/MARC

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. MAKE ; HINDWARE/CERA/PARRYWARE

Supply and fix in repairs Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Make: Jaguar /Hindware/Marc

Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed. MAKE ; HINDWARE/CERA/MARC

Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Note :Make: Jaguar /Hindware/Marc.

Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/Marc.

Supply and fix in repair Health faucet (ABS Body), mild steel chromium plated suitable for 15 mm dia pipe with1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repairs Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Make: Cat No. CAN-CHR-1111N of Jaguar or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device completeall as specified and as directed. Note :Make :Parryware/CERA/Johnson

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Blue Star/Commander

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water fancy type brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed Note:Make :Jaquar Wall Mixer CON-273KNUPR - CON-273KNUPR or equivalent model in Hindware/MARC

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick , M-35 grade ,any shape and size with glossy finish on top and grey cement confirming to IS 15658-2006 .complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for PCC 1:3:6 ,type C2( using 20mm graded stone aggregate) 75mm thick as in sub base of floor as in level course complete all as specified and as directed.

Demolition and breaking up PVC/AC drain pipes upto 75/100mm dia set in Cement mortar including removal of debris off the premises complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches. complete all as specified and as directed . .Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75mm dia PVC (SWR) floor traps plain with grating including jointing with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Dismantling of old US submain wiring of aluminium conductor cable of 2.5 & 4 sq.mm, complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral drawn through in and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal surface box fixing in wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controled by one 1 way switch .NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

All as described in item No. 84 here in before but for One bell point controlled by one bell push.

All as described in item No. 84 here in before but for One Ceiling fan controlled by one switch and regulator.

All as described in item No. 84 here in before but for One exhaust fan point controlled by one switch

All as described in item No. 84 here in before but for One light point controlled by two 2 way switches.

All as described in item No. 84 here in before but for One 05 Amps socket outlet on independent board.

All as described in item No. 84 here in before but for One 05 Amps socket outlet on the same board with other switches.

All as described in item No. 84 but wiring with 2.5 Sqmm PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular socket outlet 6 Amps 230 Volts AC two way complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular socket outlet 6 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular socket outlet 6/16 Amps 2/3 pin combined 2 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in Modular socket outlet 6 Amps 2/3 pin combined flush multipurpose 2 module 230 Volts AC complete all as specified and as directed. Make : Anchor (Roma) /Havells/Crab Tree

Supply and fix in repairs Call bell ding dong type 230 V AC circuitcomplete all as specified and as directed Note: Make : Anchor/Legrand/Havells

Supply and fix in repairs PVC or Polycarbonate ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals. complete all as specified and as directed.Make : Anchor/Legrand/Havells

Supply and fix in repairs Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and as directed. Make : Anchor (Roma)/Havells/Rider

"Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware"

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative polycarbonate T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Note :Make:Cat part no :-LUMILINENXTBS20WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative polycarbonate extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Cat part no :-LUMILINENXTBS10WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repairs LED light fitting mirror type with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directedMake: Cat part no :-LHEXBLP71N1W005 OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completecomplete all as specified and as directed. Make:Cat part no :-ENDURASUNDOWNSL25WLED765PASYBOPC OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, and connecting up light fitting with twin core twisted PVC flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

Taking down existing unserviceable / serviceable ceiling fan / exhaust fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and directed

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) connected with 3 core size FRLS PVC flexible copper cable Pre wired from ceiling rose to connector complete all as specified and as directed. Make : Orient/CG/Bajaj

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mmand including making suitable arrangement for fixing the exhaust fan i.e.,grouting , anchor fastener bolts etc and matching the surface with existing surface and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed. Make : CG/Bajaj/Khaitan

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep , 50 Hz , 1200 RPM ,copper winding with, blades, and frame and louvers , and including making suitable arrangement for fixing the exhaust fan,grouting , anchor fastener bolts etc and matching the surface with existing surface and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed. Make : CG/Bajaj/Khaitan

Taking down old unserviceable MCCB DBs/MCB DB including MCB/MCCB/Isolaters and taken as credit complete all as specified and as directed.

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum thickness CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoing including old unserviceable DB of any description and taken as credit complete all as specified and as directed. Note :Make : Indo Asian/Legrand/L&T

Supply and fix in replacement MCCB,4 pole,125 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed.Note :Make : Indo AsianHAVELLS/Legrand

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed . Note :Make : Indo Asian/HAVELLS/L&T

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings including old.unserviceable DB of any description and taken as credit complete all as specified and as directed. Note :Make : Indo Asian/HAVELLS/L&T

Supply and fix In repairs 'C' series ' 40-63 Amps Double pole MCB complete all as specified and as directed.:Make :Siemen/Indo Asian/ABB/Havells

Supply and fix in repairs MCB SP 240 Volt of capacity 6 to32 Amps ‘C’ series, complete all as specified and as directed.:Make :Siemen/Indo AsainABB/Havells

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Taking down existing U/S energy meters,dismantling and removing and refixing with suitable arrangement i.e on 2nd hard wood sunmica board for metering purpose complete all as specified and directed

Supply and laying XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 35 Sqmm, 3.5 core in trenches or fixed to wall / passing through pipe / pole and testing compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection, GI Pipe and sand cushining shall be measured and paid for separately.(ii) Make of XLPE cable :Gloster/Polycab/CCI/National/Havells

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and getting out in any type of soil complete all as specified and as directed.

Supply and fix in repair Double wall corrugated high density polymer ethyl pipe of size 63 mm outer dia with ISI marked (IS 14930- 2001 ), laid in trenches /floors and fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified and as directed. Make - Duraline, Astral (Rex ), Tirupati, Tijaria,Ketron.

Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Suppl and laying as in repairs 40 mm bore GI tubing light grade incl all accessories for garden light or as street light mounting bracket an with complete accessories such as bends / sockets / reducers / saddles incl necessary threading / drilling works all as specified and directed.Note :Make of GI Pipe:TATA/JINDAL/Prakash Surya (ISI MARKED)

Taking up or down steel tubing upto 40mm dia bore of pipe and taken as credit complete all as specified and as directed.

Supply, fix,lay and jointing Galvanised iron water tubes 'medium grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:--(i) Earth work if any shall be measured and paid seperately under relevant items of this BOQ..(ii)Make of GI Pipe:TATA/JINDAL/PRAKASH SURYA (ISI MARKED)

Supply, fix,lay and jointing Galvanised iron water tubes 'medium grade' of size 25 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:--(i) Earth work if any shall be measured and paid seperately under relevant items of this BOQ..(ii)Make of GI Pipe:TATA/JINDAL/PRAKASH SURYA (ISI MARKED)

Supply and laying 16 mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe of any description and taken as creditcomplete all as specified and as directed. Note Make :Ashirwad/Astral

Material and labour for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including taking down the existing PVC/RCC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed. Note :Make of HDPE tank:Sintex/Infra/Polycon/Astral(ISI MARKED)

Supply and fix in 25 mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe complete all as specified and as directed (Minimum weightt : 455 gm). Make : PRAYAG/WATER TEC

Supply and fix Gun metal gate valve of size 25 mm dia bore with iron wheel head, screwed both ends for iron pipe with necessary GI fittings complete all as specified and as directed . Note : Make of gun metal gate valve :Leder/Kartar/sant

Supply and fix Gun metal gate valve of size 40 mm dia bore with iron wheel head, screwed both ends for iron pipe with necessary GI fittings complete all as specified and as directed . Note : Make of gun metal gate valve :Leder/Kartar/sant

Supply and fix in repair 15mm dia Bib taps, cast copper alloy Fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directedNote :.Note : Make : Prayag/Waterman /GEM

Material and labour for Construction of Brick masonry Valve Chamber of size 900x900x960 mm (Internal dimensions) for sluice valve up to 150 mm dia with 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate for foundation, 230 mm thick brick masonry wall built in CM 1:4, 75mm average thick x 230mm width coping in PCC 1:2:4 type B1 using 20mm graded stone aggregate, 15mm thick rendering in CM 1:4 to internal walls, floors and upto150mm depth below GL to external walls, including provision of 2mm thick MS sheet cover fixed to MS angle iron frame made out of 40 x 40 x 6 mm thick angle iron with necessary MS flat iron stiffeners of size 40mm x 4mm including two coats of synthetic enamel painting over one coat of red oxide primer to all steel surfaces and provision of locking arrangements including necessary excavation and earth work in any type of soil complete all as specified and as directed.

M/s. KIRAN M CHOUGULE (BID ID -3102215)

ASHOK M RAJGOLKAR (BID ID -3102357)

N K CONSTRUCTION (BID ID -3103836)

M/s. N D KALING (BID ID -3105932)

M/s.Y.N.PATIL (BID ID -3106786)

M/S SAMARTH CONSTRUCTIONS (BID ID -3108288)

M/S JAYDEEP CONSTRUCTION (BID ID -3107511)