86214 SPL REPAIR TO BLDG NO 169 AND 170 JCO MD ACCN AT NJA COMPLEX OF AFMC PUNE UNDER GE (CENTRAL) PUNE.

Amount

B&R PORTION Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed. (Note : Contractor's quoted rate shall deemed to be inclusive for making good disturbed portion if any & nothing extra will be admissible on this account.)

Dismantling single layer Mangalore pattern or similar tiles in roofing portions bedded in lime or cement mortar, complete all as specified and as directed. (Note : Contractor's quoted rate shall deemed to be inclusive for making good disturbed portion if any & nothing extra will be admissible on this account.)

Dismantling battens for tiles, shingles etc of any size including tilting fillets, spaced exc. 15 cm, complete all as specified and as directed. (Note : Contractor's quoted rate shall deemed to be inclusive for making good disturbed portion if any & nothing extra will be admissible on this account.)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for but including sunken portion and roof concrete, unreinforced etc complete all as specified and as directed.

Dismantling of boarding, any description fixed in any position with nails i.e. in false ceiling and wall lining etc and similar position complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings any description and in any position, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of grade AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of grade AZ-150 of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws, complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161- 1979 grade St.-240,complete all as specified and directed

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates, Fe 410-W (Gde- E-250) quality-A,complete all as specified and directed

M&L for PCC (1:3:6) type-C-1 (using 20 mm graded stone aggregate) as in roof kerbs, rounded or chamfered on edges, including necessary form work complete all as specified and directed.

S&F wind ties for roof including securing bolts, and similar work conforming to Fe-290 Gde E-165,complete all as specified and directed.

Demolition of brick work/concrete block masonry or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precst concrete articles complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6), grade C-1 and setting in CM 1:6,complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar removing debris out side defence land etc complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and removing debris out side defence land complete all as specified and directed.

M&L for light shade vitrified ceramic tile 8mm to 9mm thick (square/ rectangular) polished, area of Each tiles exceeding n exc 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and directed. Note (a) 8 to 10mm thick gypsum powder slurry shall be laid over tiles to avoid scratch, damage, paint marks etc during construction work. The cost of laying gypsum powder slurry shall be deemed to be included in quoted rate and nothing extra shall be admissible on this account (b) Shade/ colour to be approved by Garrison Engineer in consultation with user.

As per Item No. 17.00 above, but as skirting over and including 10mm thick backing coat in CM (1:4), on any type of masonry surface, including triangular filleting in CM (1:3), complete all as specified and directed. Note (a) 8 to 10mm thick gypsum powder slurry shall be laid over tiles to avoid scratch, damage, paint marks etc during construction work. The cost of laying gypsum powder slurry shall be deemed to be included in quoted rate and nothing extra shall be admissible on this account (b) Shade/ colour to be approved by Garrison Engineer in consultation with user.

M&L for colored Joint Free Non Skid ceramic tiles or matt finish tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and including triangular filleting in CM (1:3) complete all as specified and directed. NOTE :Shade/ colour to be approved by Garrison Engineer in consultation with user.

M&L for telephonic black 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

M&L for Machine-cut Cuddapah stone slab 20–25 mm thick, laid over cement screed base, jointed with grey cement slurry with pigment to match, including rubbing and polishing, complete all as specified and directed.

Rounding to edges of stone slabs, one edge, such as in steps, cooking platforms and similar situations, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) , complete all as specified and directed.

All as per Item No. 24.00 but in risers of steps, skirting, dado and pillars, including 10mm thick backing coat in CM (1:4) on masonry surfaces with filleting, complete all as specified and directed.

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in CM (1:4), finished even and smooth without using extra cement, complete all as specified and directed.

M&Lfor applying one coat of alkali-resistant primer followed by two coats of oil-bound distemper on newly plastered wall surfaces, including preparation of the surface and applying putty to an average thickness of 1 mm. complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one or two coats of average thickness 1mm,including one coat of primer complete all as specified and directed.

M&L for Complete removal of existing wall finish and applying one coat of exterior primer @ 2.20 kg/10 m² followed by two or more coats of acrylic smooth exterior paint of required shade @ 1.67 L/10 m², including surface preparation.complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of oil bond distemper over coat of primer on surfaces of ceiling complete all as specified & directed.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm & removing from site.complete all as specified & directed.

Taking down Chowkats or frames with shutters (w/o taking of shutters from the frame) area n. exc 1.5 Sqm and removing from site,complete all as specified & directed.

Taking down shutter of any description exc. 1 Sqm & n. exc. 2 Sqm each leaf and removing frome site,complete all as specified & directed.

S&F of 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified & directed.

S&F of 2nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.complete all as specified & directed.

S&F of mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames,complete all as specified & directed.

S&F of 35mm thick secound class hardwood,Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified & directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified & directed.

S&F of Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified & directed.

S&F of 100 mm long SS hinges, complete all as specified & directed.

S&F of 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S&F of 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S&F of 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified & directed.

S&F of 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified & directed.

M&L for two coats of synthetic enamel painting to wooden surfaces over a coat of pink primer including preparation of wooden surface, Surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified & directed.

M&L for two coats of synthetic enamel paint on steel surfaces over one coat of zinc primer including preparation of new steel surfaces exceeding 10 cm width or girth complete all as specified & directed.

S&F of Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F of Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangement etc. complete all as specified & directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified & directed.

S&F of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F of Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165 complete all as specified & directed.

S & F of 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified & directed.

S & F 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, one side white lamination fixed with screws to timber frame work complete all as specified & directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified & directed.

S&F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified & directed.

S&F Extruded aluminium alloy handles, 100 mm long fabricated type, anodised complete all as specified & directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti-syphonage pipe and 10 litrs flush tank etc including necessary materials for fittings & making good to floor complete all as specified and directed.

S&F in repairs oval shaped vitreous china, WHB, snow white, fancy type of overall size 560mm x 470 mm, including 15 mm pillar cock cast copper alloy CP, CP fancy type 15mm bore cast copper stop valve/ange cock, 32 mm brass CP waste fitting & waste pipe & 15 mm PVC connection pipe 450 mm long complete all as specified and directed.

S&F in repairs 15 mm bore stop cock / angle cock copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed, complete all as specified and directed.

S&F in repairs15mm bore, CP, bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps two way type, caste copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with 15mm bore CP Health faucet spray with 1.5m long pipe with wall hook complete all as specified and directed.

S& F in repairs 15mm bore swan neck pillar taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm PVC connections with PTMT nuts, 450 mm long, complete all as specified and directed.

S&F of 60cm long Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, between flanges complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S& F in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Taking down 15 mm bore steel tubing/CPVC/UPVC pipes and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Supplying and laying 16 mm bore CPVC pipes (SDR 11) along with plain CPVC SDR 11 fittings on walls, ceilings, or floors, including all necessary fittings, cutting chases for concealed water tubing, making good the surfaces, and including cutting not exceeding 10 cm girth on brick masonry surfaces, complete as specified and directed.

Taking down 20 mm bore steel tubing/CPVC/UPVC pipes and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 20mm dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, to any type of pipe. complete all as specified and directed.

S&F PVC (SWR) floor trap/Nahani trap, plain with SS grating of any type. including jointing with solvent cement 75 mm dia out let including taking down of old trap & making good the disturbed surface with PCC 1:2:4 or CM (1:3), complete all as specified and directed.

S&F in repairs Harrison rails (curtain/drapery rods), 20 mm dia, stainless steel, including fancy-type stainless steel brackets (wall-to-wall) – 2 Nos per opening, and stainless steel side stoppers of required shape and size – 2 Nos per opening, complete as specified and directed

S & F 18/19mm BWR plywood with decorative face laminates on both sides of 1.00mm thick, high glossy, on woooden frame/ lipping pati etc incl all necessary arragement complete as specified and directed

S&F Autocado steel hinges for cupboard complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete as specified and directed

S&F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mmx60mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24mm x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete all as specified and directed.

S&F 1000 litre capacity, Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, including Dismantling Water Tanks & removing from site, complete all as specified and directed.

S&F sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including holding brackets etc. including dismantling old pipes complete all as specified and directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including holding brackets etc. including dismantling old pipes complete all as specified and directed.

S&F PVC(SWR) bends with access door of 75 mm dia, any radius, complete all as specified and directed.

S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access complete all as specified and directed.

S&F PVC SWR PVC (SWR) junction single, (Single T) equal or unequal 110mm dia with door access complete all as specified and directed.

S&F PVC SWR PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with door access. complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius, complete all as specified and directed.

S&F PVC (SWR) bends of 75mm dia, any radius, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 100 mm dia, complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type C2 (using 40mm graded stone aggregate) as in sub base/flooring/ paving, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded stone aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

M&L for 15 mm thick cement mortar (1:3) plaster with waterproofing compound, finished smooth and even, without using extra cement. Note: The waterproofing compound (WPC) shall be measured and paid separately.

M&L for applying a coat of industrial bitumen 85/25 at the rate of 1.20 kg/sqm including cleaning the plaster/concrete surfaces of sunken portion, complete as specified and as per zonal specifications.

M&L of plain cement concrete (PCC) 1:5:10, type E2, (using 40mm graded stone aggregate) for filling under floor, complete as specified and directed.

Complete removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and PCC padding and cement tiles and clean the surface with wire brush and washing with water to achieve the original surface of slab complete as specified and directed.

M&L for 10 mm thick plaster on roof using cement mortar (1:3) with waterproofing treatment (WPC), complete all as specified and directed. Note: The waterproofing compound (WPC) shall be measured and paid separately.

Supply only integral Waterproofing compound ISI Marked, complete all as specfied and directed.

M&L for APP based polymeric 3mm thick (minimum), weighing not less than 3.6 Kg/ Sqm prefabricated fire layer water proofing membrane reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.70 Litre/Sqm of density at 25 degre Centigrade 0.87-0.89 Kg/Litre and viscosity 70-160cps or cold sticker, application of APP modified membrane shall be by torch application, complete all as specified and as directed , Three course roof treatment consist of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @0.70 Ltr per sqm. (ii) Laying of APP based membrane as specified thickness and weight. (iii) Applying provide two coats of Bitumastic- aluminum paint.

M&L for providing cement concrete, type B-0 1:2:4 (using 12.5mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges,complete all as specfied and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (First quality) complete all as specified & directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any type and in any position, not otherwise specifically provided for, including cutting of reinforcement as required to facilitate demolition, complete as specified and directed.

E&M PORTION Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with any type of unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putty or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for point wiring with necessary fixing arrangements with PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia / PVC Casing & Caping not less then (20 x 12 ) mm including all accessories/ fittings such as junction boxes, bends, tee, elbow etc alongwith required size Modular boxes including modular frame / cover plate suitable for mounting switches /sockets etc including PVC-FRLSH insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-

One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.

One switch socket outlet point 3 pin 5 Amps on Independent board.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board but below/ side the switch board of light point in same vertical / horzintal plane.

One light point controlled by two 2-way switches complete all as specified.

All as per Ser. Item No. 112.00 above but with multistranded copper conductor 2.5 sqmm (nominal area), single core, PVC insulated and unsheathed multo stranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent type, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified and directed.

Taking down Earth plug/DBs of any make and type including MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Taking down fan/exhaust fan/wall fan any sweep any type and size, keeping with safe custody and refixing the same with replacement of 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of appropriate size as specified/directed, from ceiling rose to fan terminal, new rubber real /hooks of fan, S & F capacitor of suitable capacity, over hauling the fan complete all as specified and as directed.Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed.

M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed copper conductor cable 6 sqmm drawing in and PVC casing/caping of suitable size on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm for earth continuity conductor complete all as specified and directed.

S&F of bracket holder/ Angle lamp holder fixed on wall /ceiling complete all as specified and directed.

S&F of Call Bell AC 230 V Single Pole along with necessary electric connection complete all as specified and directed.

S&F in replacement of LED 18/20 Watt light fitting Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories complete all as specified and directed.

S&F in replacement of 10W capacity LED light fitting surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F in replacement of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete along with suitable size /bore GI pipe bracked duly cut to size and bent to shape , duly painted incl necessary clamps as required to fix on concrete / steel poles incl taking old unserviceable light & GI bracket any type and size complete all as specified and directed.

S&F in replacement ceiling rose Ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified and directed.

S&F in replacement modular switch 6A SP one - way 230V white ivory finish, complete all as specified and directed.

S&F in replacement modular switch 16A SP one - way 230V white ivory finish, complete all as specified and directed.

S&F in replacement modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S&F in replacement modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed.

S&F in replacement for Modular type, Two Module 230 Volt, not less than 80 watt stepped electronic fan regulator complete all as specified and directed.

S&F in replacement for modular bell push, single pole, one way, 6 Amp suitable for 1 module complete all as specified & directed.

S&F in replacement of SPN Distribution Box, double door in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, including taking down old unserviceable SPN DB any type and size complete all as specified and directed.

S&F in replacement of MCB SPN, 40 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked complete all as specified and directed.

S&F in replacement of MCB SP, 06 to 63 Amps 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked complete all as specified and directed.

M&L for replacement for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately.

M&L for servicing and testing of metering indoor building panels, 3-phase/1-phase, 415/230 Volts, complete as directed, including the following:- (i) Repair or replacement of damaged hinges, locks, and latches of each compartment. (ii) Cleaning of existing bus bars using CTC with red solution, providing bus bar insulation, and refixing with new nuts, bolts, and washers. (iii) Replacement of damaged copper cables and installation of new copper cables for incoming and outgoing connections of each MCCB/MCB switch, including lugs, terminals, and connectors to bus bars. (iv) Replacement of damaged cable protection pipes, worn-out cable insulation, and lugs of any size for incoming and outgoing cables. (v) Replacement of neoprene gaskets and transparent acrylic sheets for all panel doors. (vi) Removal, cleaning, and refixing of electric meters, including reconnection to the concerned quarters, complete. Note: Replacement of unserviceable MCCBs/MCBs shall be measured and paid for separately."

PRASHANT CONSTRUCTION (BID ID -3494997)

L.T Associate (BID ID -3488622)

Vijay Construction and Company (BID ID -3488247)

Parhar Enterprise (BID ID -3489068)

M/s.BAJRANG CONSTRUCTION (BID ID -3489200)

OM INFRA (BID ID -3488389)