Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹38.9 L+₹3.6 L (10.1%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹40.9 L+₹5.6 L (15.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹41.9 L+₹6.6 L (18.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹45.0 L+₹9.7 L (27.4%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
27 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW, 11 SARDAR PATEL MARG-226002
WELCOME MAINT AND COMPREHENSIVE SERVICE IN ZONE B AREA OF AGE B/R-I (WEST) UNDER GE (WEST) LUCKNOW
2024_MES_647657_1
GE/W/LKO/82 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (WEST) LUCKNOW
₹1 L
Yes
14 Jun 2024
23 Mar 2024
29 Apr 2024
23 Mar 2024
27 Apr 2024
6 Apr 2024
23 Mar 2024 - 30 Mar 2024
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M & L brickwork with fly ash bricks,Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) , complete, all as specified and directed.
M & L for Brickwork with flyash Modular bricks, straight or curved on plan to any radius in half brick thick walls, built in, in CM 1:4, complete, all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, , finished even & smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick in cement mortar 1:3 on fair face of brick/concrete surfaces of Ceiling, finished even & smooth without using extra cement complete including complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of priming complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and as directed.
M&L preparation of new surfaces of of ceiling and applying two coat of white wash on ceiling complete all as specified and as directed.
M&L 1 mm thick wall care putty on wall in two or more coats smooth finished complete all as specified and as directed
M & L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10Cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified.and directed.
M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and as directed.
M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and as directed.
M & L for preparation of old treated surface of wall and applying one coats of oil bound distemper complete all as specified and as directed.
M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper complete all as specified and as directed.
M & L for complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper complete all as specified and as directed.
M & L for preparation of old treated surface of ceiling and applying one coats of oil bound distemper complete all as specified and as directed.
Material & Labour and preparation of old/new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces complete all as specified and as directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed
M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRET P-151 and two parts of cement by weight complete all as specified and as directed.
M & L for preparing surface of roof of any description at any height (tiles/AC corrugated sheet and similar structure) by brushing, removing dust, dirt, moss, fungus formation etc. and applying two coats of cement base paint of approved make over a coat of white cement primer all as specified and directed.
M & L for preparation of old surfaces on wall surfaces and applying two coats of plastic emulsion paint including a coat of wall care putty complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm th in cement mortar 1:4 complete all as specified and as directed.
Rubbibg griding including mirror polishing of existing kota stone/marble surface complete all as specified and as directed,
M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement complete all as specified and as directed
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified & directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each, complete, all as specified & directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and and removal from site complete all as specified and directed.
S&F IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
M&L 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & as directed.
S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and as directed.
S&F 30mm thick PVC factory made panneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings, complete all as specified and as directed.
S&F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S&F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and as directed.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and as directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and as directed.
S& F in repair 18/19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.
S & F 0.9 mm thick sunmica/laminator with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamfered as directed complete all as specified and as directed.
M & L for mild steel work as in bands, straps, clamps , hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar samll articles confirming to Fe-290 Gde -E-165 complete all as specified and as directed.
S & F in repair two(double) legged floor door stopper of aluminum body & tougues anodess with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and as directed..
S & F in repairs MS steel window handle left/right including necessary welding complete all as specified and as directed.
S & F 450mm long Stainless steel six peg hanger chromium plated as approved by complete all as specified and as directed.
S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets and fixed with screw complete all as specified and as directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed.
S & F Sheet glass 4mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed.
S & F 4 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and as directed.
S&F 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads in area exc 13 Sq CM but not exc 25 Sq CM complete all as specified and as directed.
S&F 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads in area not exc 3 Sqm CM complete all as specified and as directed.
S&F continuous (Piano)) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and as directed.
S&F 100 mm long aluminium anodiesed, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and as directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S&Fin repair sliding channel of drawer 450 to 600 mm long,mild steel,chromium plated, heavy duty, superior quality and fixed complete all as specified and as directed
S & F in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed
Demolition of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
Taking down anodised aluminium three track aluminium windows exc 1.5 but n. exc 2 sqm and refixing in the same opening after repairing including necessary jointing cleats, Glazing clips, rubber packing, screws etc & with existing anodised aluminium snap beading, screws, aluminium anodised fittings such as hinges type B-21, 125 mm long of aluminium tower bolt fibre wheel rollers (slidings rollers) complete all as specified and as directed.
S&Fin repair stainless steel 25mm dia curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.
S & F in repair fancy type PVC coataed decorative curtain rod of 25mm dia of approved shade including MS bracket/wall to wall including latto on each end complete all as specified and as directed.
S&F in repair Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. Including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. Including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed.
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and as directed.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and as directed
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and as directed.
S & F in repair Flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and as directed.
S&F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and as directed.
S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and as directed.
S&F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and as directed.
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and as directed.
S&F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with reound spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and as directed.
S&F in repair wall mixer with teliphonic shower arranement, cinnecting legs and wall flanges,fancy type brass chromium plated, with closted swinging spout including plugging and securing ti walls suitable of 15 mm bore pipe complete all as specified and as directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F in repairs Brass spindle for Concealed stop cock any type or pattern complete all as specified and as directed.
S & F in repairs Brass spindle for bib tap/stap cock/angle valve etc any type or pattern complete all as specified and as directed.
S&F 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, incl Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc.complete all as specified and as directed.
S&F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.
S&F in repair 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.
S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.
Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding,complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and as directed.
S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and as directed.
S & F in repair Toilet paper holder, C P box type complete all as specified and as directed.
Supply and fixing in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and as directed.
Supply and fixing in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and as directed.
S & F in repair Jet spray, chromium plated, with 1 mtr PVC pipe of superior quality complete all as specified and as directed
S and F PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and as directed.
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified superior quality complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and as directed.
S&F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and as directed.
S&F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) Plain sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L type or J type or cranck hook complete all as specified and as directed.
S&F Asbestos cement onepiece plain angular ridge 6mm thick fixed with 'J' type or 'L' type or crank hooks complete all as specified and as directed.
S&F in repair for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe - 410- W(Gde - E 250 quality B) complete all as specified and as directed
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and as directed.
M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface
M & L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and as directed.
M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and as directed. Note for item No. 1 to 4 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.
M/s Chandra Mohan and Sons
Spectrum Enterprises
M/s Sachkhand Traders
M/S Reliance Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .