REPAIRS / MAINTENANCE OF UTILITY SERVICES OF DG SET AND OTHER MISC WORKS AT RA AND DEPOT AREA UNDER GE PULGAON

Amount

Maintenance and servicing of DG sets once in a month including attending faults on call basis for normal repairs including replacement of defective & worn out parts by new spares such as filters, gaskets, V belts, Engine oil, rubber hoses, worm drive clamps, nut bolts and cleaning of alternator with vaccum cleaner and greasing of bearings of engine and alternator, checking of batteries, adding distilled water, checking of oil and coolant levels as directed by engineer-in Charge. ( Note : - (a) Spare parts require replacement shall be measured and paid separately under mentioned items as supply only and fixing is deemed to be included under this item. (b) Servicing to be carried out as per manufacturer instruction (c) The rates includes dismantling and taking out DG set from position and trasporting it to the workshop if required & return same location and fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts if required shall be measured and paid for separately under respective item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, screws/studs. .

D G Set 320 KVA, Engine make:Cummins, Location : F subdepot

D G Set 250 KVA, Engine make:Cummins, Location :F subdepot

D G Set 250 KVA, Engine make:Kirloskar,Location: 104 AC Shed

D G Set 200 KVA, Engine make:Kirloskar, Location: Cotton market pump house

D. G . Set 160 KVA, Engine make:Kirloskar, Location:Main gate depot

D. G . Set 82.5 KVA, Engine make:Kirloskar, Location:Gunjkheda pump house

D. G . Set 82.5 KVA, Engine make: Mahindra, Location:Gunjkheda pump house

D. G . Set 62.5 KVA, make: Kirloskar,Location: No 1 substation

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: B subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: 287 Shed, E subdepot

D. G . Set 62.5 KVA, make: Kirloskar,Location: 290 Shed, E subdepot

D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 24 ASD

D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 25 ASD

D. G . Set 15 KVA, make: Kirloskar,Location: Shed No 26 ASD

D. G . Set 15 KVA, make: Mahindra,Location: Near Muradgaon Gate

D. G . Set 15 KVA, make: Mahindra, Location: Near Main Fire Stn

D. G . Set 15 KVA, make: Mahindra, Location: Near 104 AC Shed

D. G . Set 12.5 KVA, make: Kirloskar,Location:MAP Pump house

D. G . Set 10 KVA, make: Kirloskar,Location:A subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:B subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:C subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:D subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:E subdepot

D. G . Set 10 KVA, make: Kirloskar,Location:Main fire station

D. G . Set 10 KVA, make: Kirloskar,Location: ISO Office

Supply only piston Assembly complete (TD piston+ Pin ) etc as standard size of DG set 160KVA to 320 KVA, 1500 RPM complete all as specified and as directed (Note :- Fixing element of these items is included under the rates quoted by the contractor for respective item of Schedule `A' item No 1.

All as per item No 2.00 ..................but Supply only cylinder liner

All as per item No 2.00 ..................but Supply only piston rings set

All as per item No 2.00 .................. Supply only Inlet & Exhaust valves

All as per item No 2.00 ..................but Supply only Valve guide

All as per item No 2.00 ...................but Supply only valve spring inner & outer

All as per item No 2.00 ..................but Supply only oil sump packing kit complete

All as per item No 2.00 ...................but Supply only gasket kit complete set

All as per item No 2.00 ..................but Supply only lubricating oil filter with o'ring element

All as per item No 2.00 ...................but Supply only diesel filter with o'ring element

All as per item No 2.00 ..................but Supply only air filter element

All as per item No 2.00 ..................but Supply only by pass filter element

All as per item No 2.00 ..................but Supply only set of hose pipe with clamps complete set

All as per item No 2.00 ..................but Supply only RPM and hrs meter complete with chain.

All as per item No 2.00 ...................but Supply only oil pressure gauge

All as per item No 2.00 ...................but Supply only water temperature gauge

All as per item No 2.00 ....................but Supply only oil temperature gauge

All as per item No 2.00 ...................but Supply only turbo Charger

All as per item No 2.00 ..................but Supply only Fan belt

All as per item No 2.00 ..................but Supply only belt for alternator unit

All as per item No 2.00 ..................but Supply only flexible pipe set

All as per item No 2.00 ..................but Supply only fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

Supply only piston Assembly complete (TD piston+ Pin ) etc as standard size suitable for existing DG set 62.5KVA to 82.5 KVA, 1500 RPM, complete all as specified and as directed (Note:Fixing element of these items is included under the rates quoted by the contractor for respective items of Schedule `A' item No 01

All as per item No 24.00..................but Supply only cylinder liner

All as per item No 24.00...............but Supply only piston rings set

All as per item No 24.00..............but Supply only Inlet & Exhaust valves

All as per item No 24.00...............but Supply only valve guide

All as per item No 24.00.............but Supply only valve spring inner & outer

All as per item No 24.00.............but Supply only oil sump packing kit complete

All as per item No 24.00.........but Supply only gasket kit complete set

All as per item No 24.00.........but Supply only lubricating oil filter with o'ring element

All as per item No 24.00...........but Supply only diesel filter with o'ring element

All as per item No 24.00............but Supply only air filter element

All as per item No 24.00.......but Supply only by pass filter element

All as per item No 24.00........but Supply only set of hose pipe with clamps complete set

All as per item No 24.00............but Supply only RPM and hrs meter complete with chain.

All as per item No 24.00..........but Supply only oil pressure gauge

All as per item No 24.00.......but Supply only water temperature gauge

All as per item No 24.00.......but Supply only oil temperature gauge

All as per item No 24.00.............but Supply only turbo Charger

All as per item No 24.00............but Supply only Fan belt

All as per item No 24.00.......but Supply only belt for alternator unit

All as per item No 24.00...........but Supply only flexible pipe set

All as per item No 24.00............but Supply only fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

Supply only 1500 RPM of Existing make, piston assembly suitable for DG set 10 KVA to 15 KVA, complete all as specified and as directed (Note :- Fixing element of these items is included under the rates quoted by the contractor for respective items under Schedule `A' item No 01 above

All as per item No 46.00 ..................but Supply only valve spring alongwith seating washers

All as per item No 46.00 ...................but Supply only valve guide

All as per item No 46.00 .......................but Supply only gasket set complete

All as per item No 46.00 .......................but Supply only piston sleeve standard

All as per item No 46.00 .........................but Supply only piston rings set

All as per item No 46.00 .........................but Supply only Inlet & Exhaust valves

All as per item No 46.00 ......................but Supply only valve spring inner & outer

All as per item No 46.00 ....................but Supply only oil sump packing kit complete

All as per item No 46.00 .......................but Supply only lubricating oil filter with strainer o'ring element

All as per item No 46.00 ....................but Supply only diesel filter with o'ring element

All as per item No 46.00 .....................but Supply only air filter element

All as per item No 46.00 ..................but Supply only set of hose pipe with clamps complete set

All as per item No 46.00 ..........................but Supply only RPM and hrs meter complete with chain.

All as per item No 46.00 ....................but Supply only oil pressure gauge

All as per item No 46.00 ......................but Supply only water temperature gauge

All as per item No 46.00 ...........................but Supply only oil temperature gauge

All as per item No 46.00 .....................but Supply only turbo Charger

All as per item No 46.00 .........................but Supply only Fan belt

All as per item No 46.00 .....................but Supply only belt for alternator unit

All as per item No 46.00 ......................but Supply only flexible pipe set

All as per item No 46.00 ...................but Supply only fuel steel braided pipe with benjo bolts and washers etc complete of suitable length

All as per item No 46.00 ....................but Supply only Crank shaft with connected accessories for 10 to 15 KVA DG Set

M&L for servicing, repair and rewinding of Armature of DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

M&L for servicing, repair and rewinding of Field of DG Set 10KVA to 15 KVA capacity complete all as specified and as directed.

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket complete for the capacities of DG set 160 KVA to 320KVA of size complete as specified and as directed. [ Note : (i) Spares parts as per exisiting DG set required for replacement will be measured and paid as supply only under respective items hereinafter (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.]

Supply only Nozzle for DG set 160 KVA to 320KVA

Supply only FIP Element for DG set 160 KVA to 320KVA

Supply only FIP overflow valve for DG set 160 KVA to 320KVA

Supply only FIP screen filter for DG set 160 KVA to 320KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gasket of DG set 62.5 to 82.5KVA complete all as specified and as directed. (Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only). (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.

Supply only Nozzle for DG set 62.5 to 82.5KVA

Supply only FIP Element for DG set 62.5 to 82.5KVA

Supply only FIP overflow valve for DG set 62.5 to 82.5KVA

Supply only FIP screen filter for DG set 62.5 to 82.5KVA

Calibaration of fuel injection pump including replacement of service kit, bearing, spring washers, copper washers, benjo bolt, gusket complete for the capacities of DG set 10 to 15KVA complete as specified and as directed. Note : (i) Spares required for replacement as per exisiting DG set under respective items hereinafter will be measured and paid as supply only). (ii) A Certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.

Supply only Nozzle of DG set 10 to 15KVA

Supply only FIP Element for DG set 10 to 15KVA

Supply only FIP overflow valve for DG set 10 to 15KVA

Supply only FIP screen filter of DG set 10 to 15KVA

Disconnecting and taking down old unserviceable self starter, 12Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

Disconnecting and taking down old unserviceable self starter, 24 Volt DC and dismantling complete for repair, servicing, cleaning, varnishing, oiling, reassembling & testing including replacement of the Following parts :- (a) Rewinding of armature – 01 No (b) Solenoid switch – 01 No. (c) Field coils – 01 No. (d) Commutator – 01 No. (e) Carbon brush – 02 Nos (f) Bendex assembly – 01 No

M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator , diode plate , carbon brushes for the following capacities and as directed by Engineer-In- Charge :-(Note : Nuts , bolts, wahers and included in above rates and spare parts shall be measured and paid separately).

24 volts capacity

12 volts capacity

Supply & pouring of Pre-mix ready-to-use coolant suitable for radiator in 1 Ltr packing as per the requirement of time to time as directed by Engr-in-charge for various capacities of DG Set (Make : SERVO/CASTROL/PUROCOOL)

Preparation of existing surface of D.G. Set including radiator and fuel tank at various locations capacity 160 KVA to 320 KVA by scrapping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with stencil using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set at including radiator and fuel tank various locations capacity 62.5 KVA to 82.5 KVA by scrapping out the old existing peeled off paint layer, filling the cavities with suitable filler, making the surface smooth and applying two coats of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Preparation of existing surface of D.G. Set including radiator anf fuel tank at various locations capacity 10 KVA to 15 KVA by scraping out the old exiting peeled out paint layer filling the cavities with suitable filler, making the surface smooth and applying two coat of synthetic enameled paint any approved colour complete set including writing necessary details of D.G. Set SM and MES No. in the pattern and style with using synthetic enameled white paint all as directed by Engineer-in-Charge.

Supply and fix in repair lead acid battery 12 Volts 180 AH for DG set with 3 years warranty,initial charging and having indicators to know the status of level of electrolyte complete. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 150 AH for DG set with 3 years warranty, initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

Supply and fix in repair lead acid battery 12 Volts 100 AH with 3 years warranty, initial charging and having indicators to know the status of level of electrolyte complete.Make-Exide/standard Furukawa/AMCO/Amaron. Make- Exide/ standard Furukawa/AMCO/Amaron. Note: Contractor shall provide guarantee/warranty card as supplied by the manufacturer in addition to defects liability period.

S & F in repair Copper 12V battery Terminals (Positive and Negative - one set) suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

S & F in repair Battery leed (Positive and Negative - one set) copper not less than one metre each with suitable for 100 / 120/ 180 AH as per existing complete all as specified and directed by Engr-in Charge.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 10KVA to 15 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 62.5KVA to 82.5 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Disconnecting and taking out carefully old unserviceable "AVR with Diode" of 160KVA to 320 KVA of DG set and supply and fix new AVR with Diode as per existing make complete all as specified and directed.

Supply and filling lubrication oil in 20 Ltr packing SAE-40 ( 20 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and filling lubrication oil in 20 Ltr packing SAE-40 ( 15 W- 40 grade) of Make SERVO, IOC/HINDUSTAN PETROLEUM/BPCL/ CASTROL) as approved by GE.

Supply and fill in batteries distilled water in 1ltr packing for topping up complete all as specified and directed.

Supply & Fill Electrolyte of suitable Sp gravity for lead acid batteries in sealed container complete all as specified and directed.

Disconnecting, and taking out carefully old unserviceable rectifier of any make and capacity,supplying and fixing new rectifier of existing make suitable for 160 KVA to 320 KVA DG set complete all as specified and directed.

All as per item No 110.00…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 110.00……..but for DG Set of capacity 10 KVA to 15 KVA.

Dismantling radiator assembly complete from 160KVA to 320KVA DG set carefully taking it to workshop if required and cleaning with acid/descalling solution in copper tubes & fins including repairing of botton plate & rectify the leakage by soldering welding and re-fixing the same and testing complete all as specified and directed.

All as per item No 113.00…………..but for DG Set of capacity 62.5KVA to 82.5 KVA.

All as per item No 113.00….. for DG Set of capacity 10 KVA to 15 KVA.

Taking down old unserviceable changeover switch 4 pole 100 Amp for various DG Set and supply and fix new Onload change over with rotary handle complete all as secified and as directed

All as per item No 116.00 … but for 04 pole 200 Amp

All as per item No 116.00 … but for 04 pole 400 Amp

Supply and fix in repairs Start and Stop push button complete all as specified and directed.

Supply and fix in repairs LED indicator lamp with holder (RYB) complete all as specified and directed.

Supply and fix in repairs Battery charger unit of capacity 24 volt complete all as specified and directed.

S & F in repair Time delay relay suitable for 10 to 15 KVA DG Set complete all as specified and directed.

S & F in repair Time delay relay suitable for 62.5 to 82.5 KVA DG Set complete all as specified and directed.

S & F in repair Time delay relay suitable for 160 to 320 KVA DG Set complete all as specified and directed.

Supply and fix in repair control wiring of the DG set up to 125 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

Supply and fix in repair control wiring of the DG set above 125 KVA up to 320 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.

Supply and fix in repair single phase preventor suitable for operation on 415 volt 50 HZ AC supply complete all as specified and directed. (Make- L&T/Minilec)

M&L for tap setting of following capacities of DG sets complete all as specified and directed.

D. G . Set 10 to 15 KVA

D. G . Set 62.5 to 82.5 KVA

D. G . Set 160 to 320 KVA

S & F in repair Power contactor 415v, 50Hz, AC suitable for following DG set Control panel / AMF Panels for the following capacities complete all as specified and directed. Make: L&T , Legrand & Schneider

D. G . Set 62.5 to 82.5 KVA

D. G . Set 160 to 200 KVA

D. G . Set 250 to 320 KVA

Supply and fix in repair Mild Steel (Frame) Trolly of size 7 L X 6 W feet complete set suitable for 10 KVA DG Set complete all as specified and as directed . Make of Tyre- MRF,CEAT,Apollo Tyres

Supply and fix in repair wheels(tyre, tube & rim size 10 inches) for trolley for 10 KVA DG Set . Make of Tyre- MRF,CEAT,Apollo Tyres

Supply and fix in repair complete microprocessor based AMF Panel 2mm thick CRCA Sheet powder coated with 100-150 Amp auto changeover switch and connected accessories of capacity 62.5 KVA to 82.5 KVA DG Set complete all as specified and as directed. Make of all integral accessories L&T, Legrand & Schneider

Repair/Maintenance of existing microprocesor based AMF Panel with wiring, programming, replacement of any UNSV components as per site requirement for up to 125 KVA DG Set complete all as specified and as directed. labour charges includes in quoted rate. However spare parts will be measured seperately.

Repair/Maintenance of existing microprocesor based AMF Panel with wiring, programming, replacement of any UNSV components as per site requirement for above 125 KVA DG Set complete all as specified and as directed. labour charges includes in quoted rate. However spare parts will be measured seperately.

Supply & fix in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 SQMM 4 Core complete all as specified and as directed.

Supply & fix in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 SQMM 4 Core complete all as specified and as directed

Supply & fix in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 SQMM 4 Core complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 metre depth for foundation, laying of cables/pipes/poles etc., and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Supply and laying, dry river sand filling in trenches to required width at bottom and top of cable as cable cushioning including spreading, leveling, watering and consolidation complete all as specified and directed.

Supply and laying sub class 'B' bricks for cable protection complete all as specified and directed

Supply and laying pipe galvanized, “Medium class”, including fittings 40 mm dia (Cable Protection Pipe) complete all as specified and as directed

M/S Maa Durga Constructions,Pulgaon

M/S JAI BHAWANI CONSTRUCTIONS

M/s MM TRADERS

SHRI RANI SATI TRADERS

Bidder Name

SHRI RANI SATI TRADERS

M/S Maa Durga Constructions,Pulgaon

M/s MM TRADERS

M/S JAI BHAWANI CONSTRUCTIONS

SHUBHAM SALES