REPAIR AND MAINTENANCE OF INTERNAL ELECTRIC WIRING FITTINGS AND CONNECTED ITEMS AT WATER SUPPLY INSTALLATIONS AT NODAL POINT N/RANGE TPT COY S P MARG AREA OF AGE U WS NO III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Taking down carefully unserviceable copper/aluminium point wiring for light/socket/power socket complete fitting such as light fittings, switches, ceiling roses, pendents, regulators, socket etc except CI steel/pressed steel terminal boxes and making good distrubed surfaces on walls, ceiling, floors etc.

M&L for one point wiring for lights/fans with PVC insulated FR LSH unsheathed copper cable of size 1.5 sqmm including earth wire of size 1.5 Sqmm in and including Concealed PVC conduit including Metal Flush sheet box and white modular Inner/Outer cover plate with frame, for light and fan/call bell including cutting chases for conduit where required and making good to wall and ceiling complete all as specified and as directed.

All as per srl item no 02 here-in-before but for 5 pin switch socket outlet 5 Amp independent.

All as per srl item no 02 here-in-before but for 5 pin switch socket outlet 5 Amp on same board with other switches complete all as specified and as directed.

M&L for one point wiring of with PVC insulated FR LSH unsheathed copper cable of size 4.0 sqmm including earth wire of size 4.0 Sqmm in Concealed PVC conduit including Metal Flush sheet box and white modular Inner/Outer cover plate with frame, for 15 amps power point including cutting chases for conduit where required and making good to wall and ceiling complete all as specified and as directed .

M&L for one point wiring of any length as per site requirment with PVC insulated FR LSH unsheathed copper conductor cable of size 1.5 sqmm including earth wire of size 1.5 Sqmm in existing concealed conduit excluding MS sheet box and modular top sheet top cover, for light and fan/call bell and including cutting chases and sinking where required complete all as specified and as directed .

All as per srl item no 02 here-in-before but for 3 pin socket out let 5 Amps same board.

All as per srl item no 02 here-in-before but for 3 pin socket out let 5 Amps on independent board

Supply and fix in replacement of switch piano flush button type 5 Amp single pole one way complete all as specified and as directed .

Supply and fix in replacement of socket outlet 5 pin 5 Amp flush type complete all as specified and as directed .

S & F in replacement of electronic fan regulator 240 V step type single pole complete all as specified and as directed .

S&F in replacement of Switch socket outlet 2 in 1 3 pin, 5 and 15 Amp flush type complete all as specified and as directed .

S&F in replacement of ceiling rose, surface bakelite 65mm x 50mm three terminals PVC polycarbonate complete all as specified and as directed .

Supply and fixing in replacement of modular switch single pole one way 6 Amps 1 module complete all as specified and as directed

Supply and fixing in replacement of modular switch single pole one way 16/20 Amps 1 module complete all as specified and as directed

S&F in replacement of modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and as directed.

S&F in replacement of metal flush box 4 module

S&F in replacement of metal flush box 3 module

S&F in replacement of metal flush box 6 module

S&F in replacement of metal flush box 8 module

S&F in replacement of white cover plate with frame 3 module

S&F in replacement of white cover plate with frame 4 module

S&F in replacement of white cover plate with frame 6 module

S&F in replacement of white cover plate with frame 8 module

S&F in replacement of fan step regulator, 120W, 2 Module complete all as specified and as directed.

S&F for replacement of old unservicable flurorescent light tube 1x36 with LED Tube rod of 20 Watt disconnectioning existing wire from bi pin holder, diconnectioning existing blast, removng carefully existing tube and making connection for LED tube light,20 Watt including supply and fixing 20 watt Ultra bright LED in same fitting, including necessary electric connection complete including twin core 1.5 sqmm flexible copper cable for connecting to ceiling rose complete all as specified and as directed.

S&F in replacement of unseviceable CFL light to new LED recess mounting panel 2'×2' fitting 36 watt and making all electric connections including twin core 1.5 sqmm flexible copper cable for connecting to ceiling rose including necessary alteration work in false ceiling to cover the blank space in false ceiling complete all as specified and as directed.

S&F in replacement of linear & compact LED mirror light 10 watt, 6000K incluing cable for making circuit and 10 watt LED tube complete all as specified and as directed

S & F in replacement of unservicable street light with LED Street light fitting with aluminum PDC housing and toughened glass cover with IP 66 Protection 45watt including all accessories and wiring including dismantling unserviceable fittings.

S & F in replacement of unservicable street light with LED Street light fitting with aluminum PDC housing and toughened glass cover with IP 66 Protection 60 watt including all accessories and wiring including dismantling unserviceable fittings.

S & F in replacement of unservicable LED Post top lantern light fittings 30watt with aluminum die cast housing cum heat sink with PMMA diffuser in IP 66 protection complete with all accessories complete all as specified and as directed.

S & F in replacement of unservicable LED Flood light fitting with aluminum PDC housing & high luminous efficiency IP 65 Protected with front toughened glass of capacity 30 watts including all accessories and wiring including dismantling of old unserviceable fitting.

S & F in replacement of unservicable LED Flood light fitting with aluminum PDC housing & high luminous efficiency IP 65 Protected with front toughened glass of capacity 50 watts including all accessories and wiring including dismantling of old unserviceable fitting.

S & F in replacement of unservicable LED Bollard of 9 Watt in Extruted Aluminum section fitted with low glare PC diffuser in complete half section with IP 45 protection complete including foundation nut bolts etc including dismantling of old unserviceable fitting.

Supply and fix in replacement new GI bracket made out of 50mm dia GI pipe length 1.5 mtr long bent to an angle 135 degree including removing corroded GI bracket along with clamps, bolts, nuts etc from pole complete complete all as specified and as directed.

Supply and fixing in replacement of SPN DB 4 ways with 200 amps rated busbar 230 volt double door complete all as specified and as directed.

Supply and fixing in replacement of SPN DB 8 ways with 200 amps rated busbar 230 volt double door complete all as specified and as directed.

S&F in replacement of MCB SP, C- curve, 230 volt 6 -32 amp 10KA

S&F in replacement of MCB SPN 230 volt 6-32 amp 10KA

S&F in replacement of MCB TPN 230 volt 6-32 amp 10KA

S&F in replacement of MCB TPN 230 volt 63 amp 10KA

Supply and Fixing in replacement of of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 20 Amp, 10 kA complete all as specified and as directed.

M&L in replacement of Wiring for circuit/submain wiring alongwith earth wire of FR PVC insulated copper conductor,single core cable in surface/recessed of size 2x6 sq mm + 1x6 Sq mm earth wire including suitable size of PVC conduit and lugs/thimble with nuts,bollts and washers etc complete all as specified and as directed.

Supply and fix in replacement of 3 Pole MCCB, 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA.

Supply and fix in replacement of 3 Pole MCCB, 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA.

Supply and fix in replacement of 4 Pole MCCB, 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA.

Supply and fix in replacement of 3 Pole MCCB, 250 Amp, 50 Hz, 415 V with rupturing capacity 36 KA.

S & F in replacement of Bell multi music type AC ,230 Volts ,single phase comp as spd.

Supply and fix in replacement of bell push modular 6 Amp 1 module.

M&L in replacement for earthing complete with galvanized steel earth plate electrode of size 60cm x 60 cmX 6.0 mm buried in the ground to a depth not less than 2.25 mtr below ground level connected to GI strip of size 25x4 mm as earthing lead by means of GI nut, bolts, washers and check nut and complete as shown in electric plate No 03 of SSR Part-I including 20 mm dia GI pipe medium grade for watering, funnel and PCC pit cover with RCC cover of size 30cm x 30cm including earth work for excavation and removal of surplus soil complete all as specified and as directed.

S&F in replacement Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried in ground or drawn in coduit/ pipe or any other indicated situation for loop earthing etc. as required 25x4 mm gavanised iron strip complete all as specified and as directed.

M & L for junction box outdoor type made out of 3mm thick MS sheet duly painted two coats of synthetic enamel paint over one coat of red oxide primer with and including 4 Nos Aluminium Bus Bar of capacity 400 Amps mounted on insulator,grouting in PCC 1:2:4,welded with angle Iron 40x40x5mm upto length of not less than 45 cm etc complete all as specified and as directed

S&F in replacement of Kiosk box water proof of size 240 x 130 x 95mm including three phase bus bar of capacity 63 Amps rating mounting on insulator of the inflammable material complete to be mounted on pole with MS flat 50x5 mm clamps, nut & bolts complete all as specified and as directed

Supply and laying in replecement XLPE insulated heavy duty, galvanised steel strip armoured LT 1100 volt grade with aluminium conductor multi stranded conforming to IS-7098 and cables laid in ground through trenches/ pipes/ on walls/ poles including necessary lugs at termination, earth work, sand cushioning, PCC cable cover etc, and connecting of cable size 25 Sqmm Sqm 4 Core complete all as specified and as directed

Supply and laying in replecement XLPE insulated heavy duty, galvanised steel strip armoured LT 1100 volt grade with aluminium conductor multi stranded conforming to IS-7098 and cables laid in ground through trenches/ pipes/ on walls/ poles including necessary lugs at termination, earth work, sand cushioning, PCC cable cover etc, and connecting of cable size 35 Sqmm Sqm 3.5 Core complete all as specified and as directed

Supply and laying in replecement XLPE insulated heavy duty, galvanised steel strip armoured LT 1100 volt grade with aluminium conductor multi stranded conforming to IS-7098 and cables laid in ground through trenches/ pipes/ on walls/ poles including necessary lugs at termination, earth work, sand cushioning, PCC cable cover etc, and connecting of cable size 185 Sqmm Sqm 3.5 Core complete all as specified and as directed

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes.

Excavation in hard dense soil/PCC/Bituminous road and taking out soil n. exc 1.5 mtr wide and n. exc. 1.5mtr in depth and getting out for laying of cable complete all as specified and as directed

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.

Supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mmX 150mmX 40mm in trenches for cable protection keeping width of the cover parallel to the length of the cable complete all as specified and as directed.

Supply and spread clean dry river sand in trenches including leveling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning shall be measured.

M&L for cement concrete Type B2 1:2:4( 40mm graded aggregate) for resurface of cable route including breaking/removal of old PCC complete all as specified and as directed.

Supply and laying GI pipe light grade of 100mm dia including with all necessary fittings laid in trenches/ on surface for protection of UG cable complete all as specified and as directed.

Supply and laying GI pipe light grade of 50mm dia including with all necessary fittings laid in trenches/ on surface for protection of UG cable complete all as specified and as directed.

Supply and fixing in replacement of exhaust fan 250 mm sweep SP 230V , 50Hz,1400 RPM heavy duty PVC body including louvre and making hole on wall and grouting the same complete all as specified and as directed

S&F in replacement of LED recess downlight 230 volt, 50 Hz, 18 watt die cast aluminium housing with frosted diffuser slim type round recess mounting LED luminaire and cable for connecting to ceiling rose complete all as specified and as directed.

M&L for Taking down of ceiling fan 1200/1400 mm sweep size, metal body type, single phase, 240 volts AC greasing/oiling ,and rewinding with super enameled copper of existing gauge copper winding, replacement of bushes bearings, capacitor with and including hanging accessories etc and making all electric connections complete all as specified and as directed

M&L for Taking down of exhaust fan of any type/ size, , single phase, 240 volts AC, greasing/oiling, and including rewinding with super enameled copper of existing gauge copper winding, replacement of bushes bearings, capacitor, fan blade etc and making all electric connections complete all as specified and as directed.

An amount of Rs 15752.00 shall be deducted from BOQ on account of schedule of credit

Microsys Controls India

somyaenterprises

Ridhi engineers and builders

Deven Associates

Surjit and Sons

VINAY ENTERPRISES