Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC W 701 HARBHAJAN VIHAR AWHO SECTOR 14 SAS NAGAR MOHALI PB 140307 | S A S NAGAR | PUNJAB | 140307 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹20.7 L+₹2.6 L (14.2%)Rejected-Finance 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹28.7 L+₹10.6 L (58.4%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Not Being lowest | |
| 4 | L4₹31.5 L+₹13.4 L (74.0%)Rejected-Finance | L4 | Rejected-Finance Not Being lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandimandir
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-46/2022-2023 REPAIR TO RCC PARAPET, CHAJJA, PLASTER, ROOF, SOIL WASTE AND VENT PIPES AND INTERNAL AND EXTERNAL FINISHES OF MD ACCN UNDER AGE B/R II CHANDIMANDIR
2022_MES_536556_1
GE/CHM-46/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹80,000
Yes
10 Sept 2022
8 Jul 2022
13 Aug 2022
8 Jul 2022
6 Aug 2022
23 Jul 2022
Amount
Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removal, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
Reinforced cement concrete , 1:2:4, type B-1, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Mild steel high strength deformed TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
Mild steel high strength deformed TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and directed.
PCC 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in padding (50mm thick average thickness), finished even and smooth without using extra cement complete all as specified.
Machine pressed precast cement concrete with grey cement and no pigment tiles 250mm x 250mm x 22mm thick laid over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed
Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing not less than 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions complete all as specified & directed.
Pre-painted galvalume aluminium zinc coating (AZ 70) GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing not less than 3 kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, including taking down old APP complete all as specified & directed.
3mm thick FRP coloured roofing sheet, plain / corrugated, cut to size, fixed in steel frame with self tapping screws / coach screws complete all as specified & directed
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 including demolition of old brick work complete all as specified & directed.
Concrete 1:2:4 , type B-1, using 20 mm graded stone aggregate as in roof kerbs and like rounded or chamfered edges cement complete all as specified.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Two coats of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide primer including preparation of new surfaces complete all as specified & directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
Rendering 20mm thick plaster in cement mortar 1:4 on brick or concrete surface of roof with mixing of WPC, finished even and fair without using extra cement including taking down old plaster all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement complete all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, complete all as specified & directed.
10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.
Two coats of oil bound distemper over a coat of primer including preparation of new surfaces (plastered / unplastered) and applying wall are putty, not less than 2mm thick on wall including prepartion of plastered surface complete all as specified and directed.
Preparation of new plastered/RCC ceiling surfaces and applying three coats of white wash complete all as specified and directed
Preparation of new plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed.
110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches, fixed as in repair complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed on wall, fixed as in repair complete all as specified and directed by Engineer-in-charge.
110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
75mm bore PVC (SWR) bend any radius, fixed as in repair complete all as specified and directed
Cast iron soil, waste and vent pipe 100mm dia bore (ISI Marked) spun pipes, in any length with or without ears, in cement joint, fixed in walls etc, fixed as in repair complete all as specified and directed.
Cast iron soil, waste and vent pipe 75mm dia bore (ISI Marked) spun pipes, in any length with or without ears, in cement joint, fixed to wall, fixed as in repair complete all as specified and directed.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified.
Preparation of old decorated plastered/ unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified.
Complete removal of existing treatment of any type / descriptin viz distemper, white wash etc from plastered / un plastered surface of wall, chajjas, facia, cantilivers, RCC etc with mechanical means / grinder completely and applying two coats of oil bound distemper over and including one coat of interior wall primer including interior grade wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth complete all as specified and directed.
Complete removal and preparation of old surfaces of walls and applying one coat of Exterior wether proof acrylic emulsion paint on external walls , complete all as specified and directed
Preparation of old surfaces of walls and applying two coats of cement base paint, complete all as specified and directed
Preparation of old surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.
Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Cutting shrubs and tree grown on building (at any location) including digging out roots, filling holes with cement mortar 1:3 or PCC (1:2:4) type B-0 complete all as specificed and directed
1.0mm to 1.5mm thick dune /grit finish ready mixed product with natural stone granules in partical size 400-600, 600-800, 1000-1200micron consisting of excellent synthetic/acrylic binder anti cracking anti foaming, anti fungal, anti rusting agent and applied directly over a base coat and including cement plaster, necessary scaffolding and safety precautions complete a cement plaster/stone surface over a coat of base as directed
Satyadev Builders
M/s Super Trading Corporation
Standard Const. Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .