SPECIAL REPAIR TO BUILDING NO. P-113 AND P-114 (MAJOR) OFFICER MD ACCN PRATAP ENCLAVE AT JAIPUR MIL STN

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/ brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces including finished even & smooth without using extra cement on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of birla putty on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiling to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured non skid Glazed ceramic tiles in vertical surfaces of size 450x300x7mm thick over and including 15 mm thick rendering in CM (1:4), set and pointed in white or coloured cement to match complete all as specified and directed..

M&L for joint free coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floors etc, set over 15 mm thick cement screed in CM (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc, set over 15 mm thick cement screed in CM (1:6)and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F in repair fancy type 15mm bore CP cast copper alloy bib tape two ways with wall flange and areator quarter turn complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repair CP fancy type 15mm bore centre hole basin mixer cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn complete all as specified and directed

M&L of 15mm bore brass CP mixer hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F in repair towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats ( minimum weight 170 gms)

S&F in repair brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated with long shank and cup (concealed type) of 15mm bore pipe.

S&F in repair fancy type bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore.

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair of vitreous china wash down water closet pan (pedestal pattern) white including connections to drain ( or outgoing pipe) and flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and directed.

S&F in repair of PVC low level flushing cistern 10 litre capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair bottle trap 32mm bore dia of discharge pipe of PTMT having minimum water seal of 25mm (minium weight of 32mm - 260 gms/ 40mm -270 gms) complete all as specified and directed.

S&F in repair stop valves 15mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair stop valves 20mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in reapir of CP pressure JET for EWC including flexible pipe for 15 mm dia bore complete all as specified and directed.

S&F in repair PVC (SWR) floor/ Nahani trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling and taking up or down the existing unserviceable GI pipe and S&F new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors of following :-

(a) 15 mm bore

(b) 20 mm bore

S&F in repair rotational moulded polyethylene water storage tanks 500 litre capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tank and removing to store complete all as specified and directed.

S&F in repair Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed bore dia of pipe 20mm complete all as specified and directed.

M&L for providing circular, raised platform of height 20cm below the tank and base 15cm more than the external dia of tank of PVC cylindrical water tank of capacity 500 / 1000 litre using PCC 1:3:6 type C-1 using 20mm graded stone aggregate with smooth finish complete all as specified and directed.

Supply only 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding complete all as specified and directed.

S&F in repairs PVC cabinet with towel rail of size 475 x 600 x 150 mm complete all as specified and directed.

S&F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm setting & jointing with solvent cement complete all as specified and directed.

S&F in reapir bathroom Glass corner of best quality complete all as specified and directed

S&F in repair fancy type MS bracket suitable for curtain rod complete all as specified and directed

S&F in repair 20 mm dia Drapery Fancy type curtain rod complete all as specified and directed

S&F in repair fancy type caps/side bulbs PVC powder coated suitable for curtain rod fixed in repair complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing including PVC sheet fixed on flush shutter in lipping in case of PVC sheet is heat bent as lipping on the edges of doors complete all as specified and directed.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note: - Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamp, hooks for hanging fans and similar small articles conforming to Fe- 290 Gde E- 165 including necessary welding etc and fixed in position complete all as specified and directed

Cutting holes in stone walls built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required of hold fast n. exc half brick complete all as specified and directed

S & F butt hinges of size 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F of 35 mm thick 2nd class hardwood (hollock) factory made plain framed, panelled shutters (two No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces size of members as per IS 1003 Part-I, kiln seasoned and chemically pressure treated. The shutter shall be fitted to chowkhat complete all as specified and directed

35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminium anodised handles, cast type, 125mm size complete all as specified and directed.

S&F floor door stopper overall length of cover plate 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Preparing new wooden surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing newly untreated steel surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately).

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 cement complete all as specified and directed.

M&L padding in PCC 1:2:4 type B-0 ( using 12.5mm size graded stone aggregate) laid to provide a finished slope of 1:30 finished even and smooth without using extra cement complete all as specified and directed.

M&L screed bed or bedding layer of 15mm thick in CM 1:4 for laying floor finishes in roof, finished even and smooth without using extra cement complete all as specified and directed.

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/Sqm conforming to IS-3384 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing.

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint complete all as specified and directed..

M&L plain cement concrete type B-1, 1:2:4 (20mm graded aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

M&L for screed bed or bedding layer of cement mortar 1:4, 10mm thick for laying floor finishes complete all as specified & directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces incluiding filling of depressions etc and applying two coats of oil bound distemper of approved tint over a coat of wall care putty to ceiling complete all as specified & directed..

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two 160coats of oil bound distemper of approved tint over of wall care putty over walls complete all as specified & directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified & directed.

M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified & directed.

M&L for preparation of old descorated plastered / unplastered surfaces of walls, soffits of chajja, cornices etc and applying two coat of cement base paint upto two storey building including scaffolding arrangement complete all as specified & directed.

Demolition of stone slabs in roofs, suspended floors, chajja, landing etc any thickness jointed in any mortar complete all as specified & directed

M&L for sand stone slab 7.5mm thick in chajjas, sunshades, shelves, landing, cover stones, templates etc not exc 2m in length, punched dressed on face and along exposed edges, self faced on the other side and set and pointed in cement mortar 1:2 complete all as specified & directed.

M&L granite 16 to 18mm thick (of any type) work (table rubbed and polished in steps, jambs, pillars, windows cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, treads, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade makrana doogri complete all as specified & directed.

Cutting holes into or through cement concrete slabs, chajjas etc reinforced or otherwise superficial area not exc 100 sqcm completes all as specified & directed.

S&F sink with drainage board made of stainless steel 1.0mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with 7 including fixing cantilever brackets and connecting union to pipe, overall size 1120mm x 457mm bowl size 460 x 330 x 203mm includng waste pipe of polythelene of flow or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete including taking down of existing old sink complete all as specified & directed

S&F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed of approved quality complete all as specified & directed

Taking down chowkats or frames with shutters exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified & directed

Taking down chowkats or frames with shutters not exc 1.50 sqm each (without taking off shutters from the frames) complete all as specified & directed

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified & directed

M&L particle board 19mm medium density flat pressed single layer type or three layer with BWR type adhesive fixed with screws to timber frame work complete all as specified & directed

M&L veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work complete all as specified & directed

S&F Auto close hinges, stainless steel, bright finish or electro galvanised complete all as specified & directed

S&F brass handle of 100mm size type polished bright complete all as specified & directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified & directed

Dismantling terrazzo tiles on floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed

S&F light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified & directed

S&F light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonry surface or surface other than fair faces of brick work in CM 1:4 complete all as specified & directed

S&F framed work as in grills, gratings etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways etc and fixing complete Fe 290(Gde-E-165) all as specified & directed

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 for raising of height of drain, manhole / wall complete all as specified & directed

M&L chequered cement concrete tiles 20cm x 20cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm thick screed bed in CM 1:6 complete all as specified & directed

M&L Pre-paint galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M&L of kitchen basket stainless steel size 435mm X 510mm including stainless steel guide channel.

S&F for angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore.

S&F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of zinc chrome as primer (Note: Mild steel wire cloth shall be measured and paid separately under respective items)

S&F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of zinc chrome as primer (Note: Mild steel wire cloth shall be measured and paid separately under respective items)

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified & directed

Supply only water proofing compound

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified & directed

S & F 3 mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified & directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified & directed

M & L taking down existing treatment of chajja and applying 15mm thick plastering to chajjas in CM 1:3 including making dripping/ throating and PCC 1:2:4 for covering making proper slope etc complete at ground/ first floor complete all as specified & directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone, concrete block or slab wall complete all as specified & directed.

M&L reinforcement cement concrete (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) as in slab support on walls, landing, balconies, deck slabs and in shelves and the like complete all as specified & directed

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed

Taking down carefully surface aluminum or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sq.mm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sq.mm (Green) drawn into PVC concealed conduit and terminated in modular metal flush boxes 1.0mm thick for mounting modular cover plate & frame, switches, sockets, fan regulators as required for the following :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) one light point controlled by two, two way switch.

(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(e) One socket outlet 6 amp controlled by one switch on independent board.

(f) One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sq.mm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sq.mm (Green) drawn into PVC concealed conduit and terminated in modular metal flush boxes for mounting modular cover plate & frame for one socket point 16 Amps controlled by one switch.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sq.mm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sq.mm (Green) drawn into PVC concealed conduit and terminated in modular metal flush boxes for mounting modular cover plate & frame for one socket point 16 Amps controlled by one switch.

S&F angle holder, insulated polycarbonate body with back plate complete.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts.

S&F switch modular 2 way 6 Amps, 230 volts, 1 module.

S&F modular bell push 6 Amps 1 module.

S&F modular blanking plate 1 module.

S&F modular switch cover plate with frame and metal flush box 1/2 module.

S&F modular switch cover plate with frame and metal flush box 3 module.

S&F modular switch cover plate with frame and metal flush box 4 module.

S&F modular switch cover plate with frame and metal flush box 6 module.

S&F modular switch cover plate with frame and metal flush box 8 module.

S&F door bell AC 240 volts, single pole complete.

S&F ceiling rose 3 plates polycarbonate body complete.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories as required for the following :-

(a) 2x6.0 Sq.mm + 1x6.0 Sq.mm earth wire in 20mm dia conduit.

(b) 2x10 Sq.mm + 1x10 Sq.mm earth in 25mm dia conduit.

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point and including 15mm bore light grade G.I. protection pipe (up to 7.5 meter from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work including testing on completion complete all as specified and directed.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required for the following :-

(a) SPN, 240 volts, 4 ways.

(b) SPN, 240 volts, 12 ways.

S&F sheet metal enclosure with socket plug and top and MCB single pole and 20 Amps

S&F MCBs of 'C' series having breaking capacity 10KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs as required for the following :-

(a) Single pole 6 to 32 Amps

(b) Double pole 32 to 63 Amps.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 125 lumen per watt and total power consumption not more than 16 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make: Philips Cat Ref No. Endura Next Batten "BN 308C LED 20S -6500 L 60 PSU WH" or equivalent in CG/ Bajaj/Panasonic.

S&F LED fixture 10 watt having lumen output 100 lumens per watt including connection. Make: Philips Cat Ref No. BN 021 LED 10S-6500 PSU GR S1 or equivalent in CG/Panasonic/Havells as approved.

S&F LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sq.mm PVC insulated & sheathed three core flexible multi stranded copper conductor cable. Make:- Philips Cat Ref No. WT 202W LED 6S PSU S2 PC or equivalent in Panasonic/Havells/CG as approved.

Supply and fix in replacement LED luminary 40 watts IP 66 5700K outdoor luminary with standard accessories and making connection with existing light point with 3 core 1.0 Sq.mm PVC insulated multistranded copper conductor wire including fixing the same on existing Gi bracket complete. Make - Philips Cat No. BRP409 LED 040 CW HO MR FG S1 PSU GR or equivalent in Panasonic/Bajaj/CG.

Supply and fixing in replacement GI bracket made out of 32mm dia GI medium grade pipe of length 90 Cms long bend shape and size as per site requirement including 02 Nos of MS flat 40x5mm 200mm long bend to shape as required to fix the G bracket with existing wall using 04 Nos of MS fastener 10 mmx100 mm long with nut, bolts and washers complete all as specified and directed

Supply and fix in replacement 10 watts LED T-lamp B-22 base (warm white/Golden Yellow) 100 lumens, AC 220 volts. Make: Philips Part No. 9290018611 or equivalent in Panasonic/CG/Bajaj as approved.

Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting complete all as specified and directed

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete all as specified and directed

S&F in replacement LED post top light 25 Watts in spherical shape polycarbonate diffuser & IP 65 including recessing mounting pipe of size not less than 32mm dia in existing PCC/brick gate post using CM in 1:4 and making connection using 3 core 0.5 Sq.mm PVC insulated cable complete. Make: Bajaj Cat Part No. BLPTSP 25W NW LED or equivalent in Philips/CG/Havells as approved by GE

Supply and fixing in replacement 8 watts wall mounted LED decorative luminary with standard accessories and lamp including fixing the same with existing wall. Make - Havells Cat Part No. LHJE01106499 or equivalent in Bajaj / Philips / Panasonic as approved by GE

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified & directed.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2 mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 200 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sq.mm including LED indicator for R, Y & B and comprising of the following :-

(a)Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz.

(b) Outgoing : Single phase tamper proof meter with optical port 10 to 60 Amps-04 Nos.

(c) MCB DP 40-63 A 10 KA 'C' series.-05 Nos.

Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete all as specified & directed.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete all as specified & directed.

Removal of excavated material not exceeding 50m and depsiting where directed at a level n. exc 1.5 mtr above the starting point complete all as specified & directed.

S&F steel tubes 40 mm bore light grade ISI marked with medium grade fittings for cable protection as required complete all as specified & directed.

M&L for sand cushioning locally available in trenches for cushioning of LT UG cable 8 cm below cable & 15 cm above cable gently punned down to a depth of 10 cm above the top of the cable complete all as specified & directed.

Supply and fix locally available bricks for cable protection in trenches laid flat adjacent to each other and perpendicular to the length of cable complete all as specified & directed.

Schedule of Credit

UNIVERSAL INFRAPROJECT PVT LTD

J.J.ENGINEERING

Satish kumar and company

parmanand & company

M/s M S Sharma and Co.

Smita Constructions

GS BUILDERS AND ENGINEERS