Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
25 Sept 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EX ENGINEER JAL SHAKTI MECH DIV SGR
OFFICE OF THE EXECUTIVE ENGINEER JAL SHAKTI PHE MECHANICAL DIVISION SRINAGAR
Mechanical repairs to 3 Stage, 5 Cusec Bowl Assembly along with transmission system of JACK WELL Unit No.1 of WSS Doodhganga.
2023_PHE_229883_1
PHE/MECH/e-NIT-46 of 09/2023-24
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Doodhganga
As Per NIT
2 documents required · 2 mandatory
₹100
Yes
EX ENGINEER JAL SHAKTI MECH DIV SGR
₹3,000
Yes
7 Oct 2023
15 Sept 2023
26 Sept 2023
15 Sept 2023
25 Sept 2023
15 Sept 2023
Amount
Loading of the damaged Bowl/ Pump assembly already extracted from unit / JACK WELL No. 1 in a Private load carrier and shifting of same to the Private work shop for carrying out necessary repairs with all leads and lifts thereof included unloading at workshop. Dismantling of the Bowl/Pump assembly in a Private Workshop involving dismantling of 3 Stages of Bowl/Pump casing/stages followed by extraction of Impellers from housings, damaged /broken/worn-out sleeves/wearing rings, collects, bearings bushes etc. from all the stages of Bowl/Pump assembly included worn out bowl/Pump shaft using skilled personal tools and tackles required for the Job.
Removal of Damaged/worn out/broken studs/bolts from the bowl parts by way of welding the stem of damaged studs/bolts with MS bolt for unscrewing of these bolts/studs from the threads of the bowl stages using skilled labour, tools and tackles as required to carry out this precision job. Reaming of the damaged threads of the bowl parts using reaming tool and making of new threads (As per sample) in the bowl stages for proper fitment of new studs /bolts. The job also includes providing of 20 no. bolts/studs with nuts as per sample
Providing, Fabrication, and fitting of New Stainless Steel GRADE 410 bowl shaft having OD=55 mm Length= 1.98 meters as per sample. The Shaft has to be precisely machined at various required segments for accommodating Impellers’, locking Collets, bearing bushes etc. by way of using skilled labour, tools and tackles. The job includes using high speed cutting tool to achieve the required parameters. The Job includes making of impeller seats for fitment of SS impellers at required position of the shaft. The job also includes fabrication of threads 65 mm in length from upper side of the shaft for fixing of coupling Sleeve after reducing the upper portion to 42 mm dia for 350 mm length/ as per sample. The job includes finishing of the shaft to size for proper fit in three stages of the bowl assembly by way of cutting, turning and finishing processes. Checking of alignment of shaft on the lathe for proper fitment in the bowl housing/stages by way of cutting, turning and finishing.
Providing, fabrication and fitting of new stainless steel head shaft as per existing sample. The head shaft shall be of SS 410 having OD=43, length 1.803 mtrs (as per sample) The shaft has to be precisely machined and threaded on both sides with threaded portion on bottom side upto length of 60mm (as per sample) and on upper side upto length of 125 mm. The shaft shall be provided with keyways of size 12 mm in width and 165 mm length on one side and 76 mm long on other side. The job also includes checking of alignment of head shaft on the lathe for proper alignment and fitment
Providing, Fabrication and fitting of cut less Gun Metal [GM] Wear-ring /Necking having ID= 200 mm and OD= 212 mm and width/ length of 50 mm (as per sample) fabricated / casted out of Gun Metal along with making of Seat and collar for fitment in bowl stage and on impeller shoulders respectively. The job involves engagement of skilled labour, precise tools and tackles as required.
Providing, Fabrication, and fitting of CUTLESS G.M BEARING BUSH/SLEEVE ( including Rubber stabilizing Bush as per required size inside it) of dimensions ID= 55 mm, OD= 75 mm and length 75 mm as per sample to be press fitted in intermediate bowl parts fabricated out of suitable hallow casted G.M bar by way of cutting, turning, finishing process of machining after extraction / cutting of worn out sleeves by way of engaging skilled labour, tools and tackles required for this precise Job.
Providing, Fabrication, and fitting of CUTLESS G.M BEARING BUSH/SLEEVE ( including Rubber stabilizing Bush as per required size inside it) of dimensions ID= 52 mm, OD= 80mm and length 192 mm (as per sample) to be press fitted in Bell mouth assembly part fabricated out of suitable hollow casted G.M bar by way of cutting, turning, finishing process of machining after extraction / cutting of worn out sleeves by way of engaging skilled labour, tools and tackles required for this precise Job.
Providing Fabrication, and fitting of cutless G.M SCREW BEARING having ID= 55 mm, OD= 90 mm, and 150 mm long as per sample to be fitted on rear end of the upper bowl part on threads and inside the tube threaded internally. The screw bearing should be threaded externally and fabricated out of suitable hollow casted G.M bar by way of cutting, turning, finishing process of machining after extraction / cutting of worn out sleeves by way of engaging skilled labour, tools and tackles required for this precise Job.
Providing Fabrication, and fitting of cut less G.M CUTLESS BEARING Bush (including rubber stabilizing bush as per required size inside it) having ID= 55 mm, OD= 75 mm, and 205 mm long as per sample to be fitted inside the bottom end of the upper bowl part fabricated out of suitable hollow casted G.M bar by way of cutting, turning, finishing process of machining after extraction / cutting of worn out sleeves by way of engaging skilled labour, tools and tackles required for this precise Job.
Fabrication, Providing and fitting SS LOCK COLLET frustum type as per the sample having length of 90mm, ID = 55mmand OD =68mm as per sample fabricated out of solid SS round cylindrical bar by way of turning, boring, cutting and finishing / maching process. The job includes cutting of impeller lock collet around slanted portion to be press fitted for locking the impeller on the bowl shaft by way of enanging skilled labours, tools tackles etc required for precise job.
Repairs to the damaged/broken suction bell flange end piece using CI Welding electrodes by way of engaging skilled labour, tools and tackles required for the job
Providing , fabrication and fitting of SS Socket internally threaded in anti-clock direction of (length 100mm , ID = 42mm and OD= 55 mm approx. / as per sample) to fit on line shaft as per sample.
Providing fabrication, and fitting of intermediate GM SCREW BEARING as per sample / having ID= 50 mm, OD= 65 mm, and 120 mm length (as per sample) fully threaded from outer side to be fabricated out of suitable hallow casted G.M bar by way of cutting, turning, finishing process of machining as per requirement after extraction / cutting of worn out screw bearing by way of engaging skilled labour, tools and tackles required for this precise Job for transmission system.
Repairs to existing available departmental damaged tube tensional nipple (TT Nipple) having ID 64 mm and OD 73 mm and overall length of 1244 mm with damaged /worn out threaded portion upto 165 mm having external threads on top end and internal threads on bottom end by way of providing , fitting /welding of NEW MS tube on both upper and lower end after cutting of the damaged /worn out portion of the existing TT Nipple as per dia required having length of 300mm as per sample including making of external and internal threads as per requirement by way of cutting , turning and finishing processes of machining and checking its proper alignment
Repairs to existing available departmental damaged tube tensional nipple (TT Nipple) having ID 64 mm and OD 73 mm and overall length of 825mm with damaged /worn out threaded portion upto 165 mm having internal threads on both sides way of providing , fitting /welding of NEW MS tube on both upper and lower end after cutting of the damaged /worn out portion of the existing TT Nipple as per dia required having length of 300mm as per sample including making of external and internal threads as per requirement by way of cutting , turning and finishing processes of machining and checking its proper alignment
Providing fabrication and fitting of Cast Iron Bushing of following dimensions after extracting / removing damaged / worn out CI Sleeves from the Bowl : Outer Dia = 232mm ( approx.) , Inner Dia = 212mm (approx.) , Length = 60mm.
Providing and fitting of 5 mm rubber insertions at four spots duly cut out from the RI sheet as per requirement for the pumping unit.
Loading of the Bowl/ Pump assembly after conducting repairs and back shifting of same in a Private load carrier including all leads and lifts upto Site WSS Doodhganga and unloading at site and then installing it at Jackwell spot no. 1 along with prime mover. The Job includes using of all kinds of tools and tackles required at site besides installation work shall be done by the skilled workers. Finally, Job includes testing at site.
SHAWL ENGINEERING WORKS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .