8864/E8

Amount

Taking down sub mainwiring alongwith damaged casing capping /PVC conduit pipe from the wall roof or in floor and making good disturbuted surfaces complee all as directed

Supply and fixing sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through and including PVC conduit not less than 20 mm dia with all fittings including one run of 4 sq mm PVC insulated unsheathed stranded single core copper conductor as earth wire complete all as specified and as directed. Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4 sq mm will be measured as one length. (ii) quoted rate shall included work of cutting chassing in wall and other surface making good the surface with CM 1:4 and finishes to match.

Supply and fixing sub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through and including PVC conduit not less than 25 mm dia with all fittings including one run of 6 sq mm PVC insulated unsheathed single core copper conductor as earth wire complete all as specified and as directed. Note : (i) Two run of single core cable 6 sq mm and one run earth wire 6 sq mm will be measured as one length.

Supply and fixing sub main wiring with two run of single core 10 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn through and including PVC conduit not less than 32mm dia with all fittings including one run of 10 sq mm PVC insulated unsheathed single core copper conductor as earth wire complete all as specified and as directed. Note : (i) Two run of single core cable 10 sq mm and one run earth wire 10 sq mm will be measured as one length.

Taking down unserviceable rusted / damaged SPN/ TPN DBs of any type and way with MCBs in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.as per direction of engineer in charge.

Supply and fixing sheet metal enclosure for DB's when MCBs to be used made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way single pole & neutral with 200 amps rated bus bar, 240 volts complete all as specified and as directed.

Supply and fixing sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified.

Supply and fixing sheet metal enclosure for DB's when MCBs to be used 12 way single pole and neutral, double door, with 200 amps rated bus bar complete including connection all as specified.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN double door with 200 amps rated bus bar, 240 volts complete all as specified and as directed.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used, phosphorised, power coated, neutral link, earth bar and din rail, 8 way TPN double door with 200 amps rated bus bar, 240 volts complete all as specified and as directed by Engineer in charge.

Supply and fixing MCB 6 to 32 Amps, SP, 240 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge.

Supply and fix MCB 40 Amps, SP, 240 Volts , 'B' curve braking capacity 10 kA complete all as specified and as directed by Engineer in charge.

Supply and fixing MCB 40 to 63 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge.

Supply and fix in replacement MCB 6 to 32 Amps,SP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Supply and fix in replacement MCB 40 to 63 Amps,DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Supply and fixing MCB TP 25 to 63 Amps, 415 Volts ,B- Curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Supply and fixing MCB TPN/FP 40 to 100 Amps, 415 Volts ,B- Curve breaking capacity 10 KA complete all as specified and as directed by Engineer in charge.

Supply only Casing capping with 04 Nos accessories like tee bend elbow, casing caping of suitable size of high quality material size 12-20mm of 2m length complete all as specified and as directed by Engineer in charge.

Supply only conduit pipe PVC high quality with 04 Nos accessories like tee bend elbow size 20mm, 10 feet long complete all as specified and as directed by Engineer in charge.

Supply only accessories like wooden gutka, china clip, 0.5 inch screw,1 inch screw, 2 inch screw etc. complete all as specified and as directed by Engineer in charge.

Supply only 1.5sqmm FRLSH flexible PVC insulated single core unsheathed industrial multistrand Copper conductor cables complete all as specified and as directed by Engineer in charge.

Supply only 2.5sqmm FRLSH flexible PVC insulated single core unsheathed industrial multistrand Copper conductor cables complete all as specified and as directed by Engineer in charge.

Supply only plug top 3pin16A 240V Easy to carry, Non flammable & Durable Heavy duty , nickel plated brass terminals Long lasting polycarbonate plastic material complete all as specified and as directed by Engineer in charge.

S&F AC starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired including taking town of old unserviceable one complete all as specified and as directed by Engineer in charge.

S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty all as including taking down of old unserviceabe one specified and as directed by Engr-in-charge.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized strip 32 mm x 6 mm as earthing lead protected by GI pipe medium grade 40 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with a Cast Iron hinged cover resting over the Cast Iron frame painted with bitumastic paint which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters complete all as specified and as shown in electrical plate No. 5 of SSR Part-I and testing of earth resistance as required complete all as specified and directed. as per direction of engineer in charge.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed by Engineer in charge Note- Old Meters to be deposited in MES store.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 3phase 415V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed by Engineer in charge. Note- Old Meters to be deposited in MES store.

M&L for fault location monitor to access the fault in LT cable of any size all as specified and directed

Supply and fix MCCB 4 pole 400A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 400A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 350A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 250A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 200A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 160A, 36KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 25A, 25KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 100A, 16KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 63A, 16KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fix MCCB 4 pole 40A, 25KA, 415V thermal and magnetic adjustable type including making all fixing arrangement, cutting welding of existing panel board as per site requirment and painting the disturbed part of panel as per the existing colour ofthe panel and electric connection complete all as directed including taking down old one complete all as specified and as directed by Engineer in charge.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 3 poles and 32A complete in APFC panel with all connection including taking down old one complete all as specified and as directed by Engineer in charge.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed by Engr-in-Charge.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Laying only in trenches bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. Note:- Old serviceable bricks obtained from taking down item shall be reused.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and directed by the Engr-in-Charge.

Removing excavated materiasl not exc 50 mtr and depositing where directed at a level next 1.5mtr above the starting point complete all as specified and direced by the Engr-in-Charge

S & F DOL motor starter 3 phase for 7 HP including taking down old one complete all as specified and as directed by Engineer in charge.

S & F Fully automatic star delta starters in sheet steel enclosure type MN/ ML for motor rating AC 3 Duty 415 V 50 Hz 3 Phase 17.5 HP including taking down old one complete all as specified and as directed by Engineer in charge.

S & F Fully automatic star delta starters in sheet steel enclosure type MN/ ML for motor rating AC 3 Duty 415 V 50 Hz 3 Phase 30 HP including taking down old one complete all as specified and as directed by Engineer in charge.

S & F Fully automatic star delta starters in sheet steel enclosure type MN/ ML for motor rating AC 3 Duty 415 V 50 Hz 3 Phase 75 HP including taking down old one complete all as specified and as directed by Engineer in charge.

Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia and bricks for cable protection where ever appeared and all as directed by Engineer-in-Charge. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 240 Sqmm 3.5 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

All as per item No. 52.00 mentioned here-in-before but 185 sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 150 sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 120 sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 95 Sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 70 Sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 50 Sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 35 Sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 25 Sqmm 3.5 core

All as per item No. 52.00 mentioned here-in-before but 16 Sqm 4 core

All as per item No. 52.00 mentioned here-in-before but 10 Sqm 4 core

S&F Straight through joint kit heat shrinkable 10 to 50 sqmm 4 core for LT 1100 Volts grade complete with jointing materials and accessories suitable for 3.5/4 core XLPE armoured conductor cable of following sizes including testing of cable after joints all as specified and directed.

All as per item No. 63.00 mentioned here-in-before but 70 sqmm to 95 sqmm 3.5 core

All as per item No. 63.00 mentioned here-in-before but 120 sqmm to 240sqmm 3.5 core

Materials and labour for Cutting roads / hard standing to a depth not less than 45 cm and not less than 40 cm wide for laying of GI pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc 50 m complete all as specified and as directed by the Engr-in-Charge.

M & L for 40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

M & L for 50mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

M & L for 80mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

Taking down old aluminium strip/ GI strip of any size and refixing the same with new saddles ,clamps,screws etc to its original position and taking down existing unserviceable/worn out complete all as specified and as directed by engineer in charge.

M&L for 32 x 6mm aluminium strip burried in ground/fixed on wall ,roofwith saddles and fixing screws etc., for roof conductors and down conductors above ground complete all as specified and as directed

M&L for Air termination,single pointed Al rod 12mm dia and 300mm long complete all as specified and as directed

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm,drilled and screwed including 3nos 8mm dia 25mm long hex. Head screw and taking down existing unserviceable/worn out complete all as specified and as directed by engineer in charge.

Supply & fixing Changeover Switch in sheet steel enclosure, four pole, 400 Amps, Manual type, 415 V including taking down old unserviceable one complete all as specified and as directed.

Supply & fixing Changeover Switch in sheet steel enclosure, four pole, 320 Amps, Manual type, 415 V after taking down old unserviceable onecomplete all as specified and as directed.

Supply & fixing Changeover Switch in sheet steel enclosure, four pole, 250 Amps, Manual type, 415 V after taking down old unserviceable onecomplete all as specified and as directed.

Supply & fixing Changeover Switch in sheet steel enclosure, four pole, 200 Amps, Manual type, 415 V after taking down old unserviceable onecomplete all as specified and as directed.

Disconnecting the 0.5/1/2 HP unserviceable pump set and S&F servicing , rewinding incl overhauling by replacement of bush bearing of motor/pump and refixing the same testing & commissioning complete all as directed by Engr-in-Charge.

S & F multifunction meters, digital type,50-520VAC (P-P) size 96 x 96 mm with dedicated buttons available for direct access to basic, power abd ebnergy parameters after taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Digital time switches 2 module 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

Material and labour for repair of LT panels/LT feeder piller boxes by carrying out checking thoroughly all electrical connections, lugs busbar, voltmeter, ammeter ,cable glands ,insulator on busbar, and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirements and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels/feeder piller boxes by cleaning with dry cloth /removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters /numbers as directed and repair the existing PCC basement of the feeder piller box/ LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction of Engineer- in- charge. Note:- Cost of Painting, Nuts, bolts, washer etc. are deemed to be included in quoted rates.

M&L Danger notice plate of 1.6mm thick for LT 20x15 cm mild steel sheet vitreous enamelled white with etters ,figures,and conventional skull and bones in signal redcolour and fixed with Ms clamp bolts and nuts complete all as specified and as directed.

Materials and Labour Cutting /boreing of existing road / path , hardstandingetc for taking out cable and water pipe to protection with iron cover plate for passing cable,water pipe and making good the disturbed road top surfaces with following cement concrete all type, using of suitable depth and finished with speed breaker complete all as uder directed by Engineer-in-Charge.

Supply and Laying Steel Water Tubing 80mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 50mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 40mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.

NIRMAL DAS AND CO. (BID ID -3482362)

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION (BID ID -3481800)

Rounaq Enterprise (BID ID -3481794)

BHASKAR SUPPLY AGENCY (BID ID -3480825)

R T BUILDERS (BID ID -3481024)

J B NATH AND SON (BID ID -3481985)

ESS PEE UDYOG (BID ID -3480879)