WBPWD/EE/KCD/NIT42E/2018-19/1

Amount

Supply & placement of Desklet Chair CH18C Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and as per approved drawing & design / specification of EIC.Seat And Back Assemble: The Seat and Back are made from seasoned wood and plywood. The same is upholstered with black Synthetic leather and polyurethane foam. Back Size: 38.5 cm W X 27.0cm H. Seat Size: 38.5cm W X 39.5cm H. Desklet Assembly: The wooden desklet is made of 1.8+/- 0.05cm thick pre-laminated particle board with 0.15+/-0.03 cm thick PVC lipping all around. Size: 54 +/- 0.1cm W X 29 +/- 0.1cm H. Armrest: The one-piece armrests are made of black integral skin polyurethane foam with 50-70 Shore hardness and reinforced with M.S. Insert. The armrests are scratch and weather resistant. Understructure Assembly: The assembly is a frame made of 2.54 +/- 0.03cm X 0.2 +/- 0.016cm thick M.S. E.R.W. tube and a welded leg tube forming the armrest tube made of 2.54 +/- 0.03cm X 0.2 +/- 0.016cm thick M.S. E.R.W. tube to form the complete assembly which is powder coated (DFT 40-60 microns). The desklet is fitted on the right hand side armrest-cum leg tube. Paper Tray: The Paper tray is made of 0.4 +/- 0.005cm M.S. Wire spot welded to form a mesh. It is black powder coated (DFT 40-60 Microns). Size: 35.1 +/- 1.0cm W X 36.0 +/- 1.0cm D X 12.5 +/- 1.0cm H, including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified manufacturer's Table model Finesse 6030 , top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING. Extended Return Unit (ERU)top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING.PEDESTAL SPECS: Configuration: Box + Box + File. Dimension: 390mm W X 435mm D X 720mm H (Including Leveler). Construction & Material: 0.8mm Thick CRCA for Body Shell, Drawer Front, Front Side Stiffener, Rear Side Stiffener & Bottom. 1.2mm Thick CRCA Top Stiffener * Bottom Stiffener. 0.6mm Thick CRCA Drawer Tray. The CRCA Should be Grade D as per IS-513. Drawer Specs: All Drawers with double extension precision ball slide. For Drawer Pulling, Side wise tapered recess should be provided in shell behind drawer front. Locking: a 10 lever Cam Lock & Central RH locking with actuator should be provided. Leveler: Plastic M8 Leveler should be mounted below the Body Shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10) , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supply & placement of Godrej Make Kareena visitor Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC.The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-1.5+/-0.05cm. The backrest shall consist of a fixed type mechanism i.e no back up/down adjustment. The leg frame welded assembly shall be chrome plated, made from 3.5+/-0.03cm x 1.5+/-0.02cm x 0.16+/-0.0128cm thick ellipitical MSERW tube and provided with a base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 66.5cm, Depth of Chair - 58.0cm as measured from pedestal below. Height from ground - 88.5cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supplying and placement of Godrej Make Finesse 5026 Desk from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design / secification of Engineer-in-charge.Dimension 1500 x 750..Main Desk Top and Modesty Panel 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM.THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING.Modesty Panel 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. ERU 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supply & placement of Godrej Make Enterprise 1500 Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC/ .Dimension of the table 1350x750x728. Main Table Desk Laminate with Edge Band & with Metal Under structure power coated. Top Worksurface 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding Under Modesty Panel 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges Structure are duly sealed with 2mm thick PVC Edgebanding Rectangular Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder Frame coat (Epoxy polyester) Leg Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) CPU Modesty 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester) , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supply ,Fitting & Fixing of Godrej make almirah model Storwel from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design / specification . 1. Product Size 916mm(W) x 486mm(D) x 1980mm (H) (variation upto +_ 10%) Excluding Leveller in Welded construction. 2. 0.7mm thk (±0.07mm) CRCA* for shelf , 0.8mm thk High yield strength CRCA for doors and back & 0.9mm thk CRCA for all other components.CRCA D' grade as per IS:513, CRCA'D' grade high yield strength as per IS:513 3. Locking & handle Brass handle Two way locking mechanism with shooting bolt 5 Shelving Height wise adjustable shelf mounting Uniformly Distributed Load Capacity per each full shelf is 40 Kg maximum 4.Nos. of adjustable full Shelf. Box file A4 size (85Wx345Hx285D) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. 5. Leveller M10 screw type leveller with hex plastic base , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Supply & placement of Godrej Make Bravo Mid Back from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC. of where seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.5 to max 54.5cm, Height - min85.5 to max 97.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm , including all taxes and as per specification , direction and order of Engineer-in-Charge.

Godrej And Boyce Mfg.Co.Ltd.

SANKAR FURNITURE